Infinity-Box Android Service Tool / AST v1.02 - New models and features - GSM-Forum

GreenBoss · 10-31-2017, 23:16

Infinity-Box Android Service Tool / AST v1.02 - New models and features

ADB tab activated
- Identify
Allow read complete device info
- Reset FRP
Generic Android FRP reset over ADB
- Set Device Mode
Allow change device mode to: BOOTLOADER, RECOVERY, SIDELOAD, EDL

Service
ASUS FRP reset activated
FastBoot -> Reset FRP -> ASUS Generic
NOT all ASUS models supported! Send us reports to add more models.
FastBoot protocol updated

Other
Protocol support ( adb/fastbot ) updated
Flashing protocol updated ( moto )

Download link

Upload file to Support

Infinity-Box 12 years (2005 - 2017) updates and support as nobody else - News

Twitter - Facebook - Telegram

Kirumira · 11-01-2017, 06:13

Itel it1409 SPD sc7731c TESTS

Code:

Operation : Identify (ADB) [ v1.02 ]
Waiting for device in ADB mode ... 
1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!
Connect Ok!
Device Info : 
Vendor       :   itel
Model         :   itel it1409
Device        :   itel_it1409
Android      :   5.1
Product      :   c219_tsl_131
Brand          :   Itel
Serial          :   0181210692202216
Build_tm     :   Wed Jul 20 16:32:33 CST 2016
DisplayID    :   LMY47D release-keys
Patch Ver    :   LMY47D
SecPatch     :   2016-06-01
Hardware    :   sc7731c
HW Board    :   itel_it1409
CPU rel         :   armeabi-v7a
SIM Card      :   ABSENT,NOT_READY
BaseBand     :   TM_BASE_15B_W16.04.3_P5|sc7731g_CP0_modem|05-04-2016 16:42:48
BaseBand     :   TM_BASE_15B_W16.04.3_P5|sc7731g_CP0_modem|05-04-2016 16:42:48
RIL ver          :   android reference-ril 1.0
USB Conf       :   mtp,adb
Sys USB         :   mtp,adb
FS Crypt        :   unencrypted

Done!
Elapsed: 00:00:09

Code:

Operation : Set Device Mode (ADB) [ v1.02 ]
Waiting for device in ADB mode ... 
1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!
Connect Ok!
Set device mode : RECOVERY

Done!
Elapsed: 00:00:08

Code:

Operation : Set Device Mode (ADB) [ v1.02 ]
Waiting for device in ADB mode ... 
1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!
Connect Ok!
Set device mode : BOOTLOADER

Done!
Elapsed: 00:00:08

thilina bandara · 11-01-2017, 07:18

Please be kind to update for new huawei phones boot loader unlocking and frp remove ability for y3 ii, y5 ii

nahidroman · 11-01-2017, 09:39

motorola xt1550 frp reset done

Quote:

Operation : Enable ADB (Moto) [ v1.02 ]

Waiting for NetInterface arrival ...

1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON'
3. Connect USB cable, when device boot complete!

Connect Ok!

Waiting ...
Trying link with : 192.168.137.2
Connected to device!

Device : XT1550
VerInfo : OSPREY_APAC_CUST
Version : Blur_Version.24.226.17.osprey_retasia_ds_2gb.retas ia.en.03

Enabling ADB ...

1. Disconnect cable from device, press and hold 'VOLUME_DOWN' and 'POWER_ON'
2. Select 'FACTORY MODE' and press 'POWER ON'!
3. Wait for device boot completely!

Done!
Elapsed: 00:00:09
Operation : Reset FRP (ADB) [ v1.02 ]

Waiting for device in ADB mode ...

1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!

Connect Ok!

Device : osprey_retasia_ds_2gb
Model : MotoG3
FRP reset passed! Make FACTORY RESET from menu!

Done!
Elapsed: 00:00:13

deepakkumar39 · 11-01-2017, 11:46

please update mtk moto model....................

DZcondor · 11-01-2017, 11:54

Please , we need MTK update for new CPU & Android OS .

ahmer5050 · 11-01-2017, 11:59

thnkx for the new update............Add Also MTK Chip

abdul.majid8186 · 11-01-2017, 12:37

Add Moto Enable ADB for More Model..New version Not Supported like 6.x v7.x..I try this model But not Work.

xt1096 5.1
xt1097 5.1
xt1585 7.0

biddut1979 · 11-01-2017, 13:21

Card found : 32663DC4 , v0136
Infinity-Box Android Service Tool [AST] v1.02

Operation : Identify [ v1.02 ]

Waiting for device in fastboot mode ...

1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!

Connect Ok!

Main Info ============
CPU : MSM8952
CID : 0x0032
IMEI : 358187070856037
UID : C511BE0000000000000000000000

Model Info ============
DevModel : XT1643
IntName : athene_16mp

SW Info ============
DevSWVer : Blur_Version.25.221.10.athene.retail.en.US
DevQCVer : LA.BR.1.3.6-01710-8976.0
BaseBand : M8952_70030.25.03.62.01R ATHENE_INDIA_DSDS_CUST
BootLDRv : moto-msm8952-B1.06

HW Info ============
eMMCInfo : 32GB SAMSUNG RX1BMB RV=08 PV=07 FV=0000000000000007
DRAMInfo : 3GB SAMSUNG LP3 DIE=6Gb M5=01 M6=05 M7=00 M8=7B

Lock Info ============
WarrantyVoid : no
FRP Lock : protected (77)

Done!
Elapsed: 00:00:24

Operation : Enable ADB (Moto) [ v1.02 ]

Waiting for NetInterface arrival ...

1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON'
3. Connect USB cable, when device boot complete!

Connect Ok!

Waiting ...
Trying link with : 192.168.137.2
Connected to device!

Device : XT1643
VerInfo : ATHENE_INDIA_DSDS_CUST
Version : Blur_Version.25.221.10.athene.retail.en.US

Enabling ADB ...

1. Disconnect cable from device, press and hold 'VOLUME_DOWN' and 'POWER_ON'
2. Select 'FACTORY MODE' and press 'POWER ON'!
3. Wait for device boot completely!

Done!
Elapsed: 00:00:34

Operation : Reset FRP (ADB) [ v1.02 ]

Waiting for device in ADB mode ...

1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!

Device not found! Check cable, drivers and conection!

Operation : Reset FRP [ v1.02 ]
Mode : Remove ASUS GENERIC FRP

Operation break by user request!

Operation : Reset FRP [ v1.02 ]
Mode : Remove QLM GENERIC FRP

Waiting for device in fastboot mode ...

1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!

Connect Ok!

FRP Erase FAIL!

Done!
Elapsed: 00:01:11

Operation : Identify [ v1.02 ]

Waiting for device in fastboot mode ...

1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!

Connect Ok!

Main Info ============
CPU : MSM8952
CID : 0x0032
IMEI : 358187070856037
UID : C511BE0000000000000000000000

Model Info ============
DevModel : XT1643
IntName : athene_16mp

SW Info ============
DevSWVer : Blur_Version.25.221.10.athene.retail.en.US
DevQCVer : LA.BR.1.3.6-01710-8976.0
BaseBand : M8952_70030.25.03.62.01R ATHENE_INDIA_DSDS_CUST
BootLDRv : moto-msm8952-B1.06

HW Info ============
eMMCInfo : 32GB SAMSUNG RX1BMB RV=08 PV=07 FV=0000000000000007
DRAMInfo : 3GB SAMSUNG LP3 DIE=6Gb M5=01 M6=05 M7=00 M8=7B

Lock Info ============
WarrantyVoid : no
FRP Lock : protected (77)

Done!
Elapsed: 00:00:47

Operation : Enable ADB (Moto) [ v1.02 ]

Waiting for NetInterface arrival ...

1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON'
3. Connect USB cable, when device boot complete!

Connect Ok!

Waiting ...
Trying link with : 192.168.137.2
Connected to device!

Device : XT1643
VerInfo : ATHENE_INDIA_DSDS_CUST
Version : Blur_Version.25.221.10.athene.retail.en.US

Enabling ADB ...

1. Disconnect cable from device, press and hold 'VOLUME_DOWN' and 'POWER_ON'
2. Select 'FACTORY MODE' and press 'POWER ON'!
3. Wait for device boot completely!

Done!
Elapsed: 00:00:10

Operation : Reset FRP (ADB) [ v1.02 ]

Waiting for device in ADB mode ...

1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need!
2. Insert USB cable, accept AUTH on PhoneScreen, if software ask!

Device not found! Check cable, drivers and conection!

LEENO · 11-01-2017, 13:34

still not working if installed in d:\program files\

it work in c:\infinitybox\ast

Kirumira · 11-01-2017, 13:40

Quote:

Originally Posted by LEENO

still not working if installed in d:\program files\

it work in c:\infinitybox\ast

Hello,
which is not working? Can you explain more your problem.

LEENO · 11-01-2017, 13:43

Quote:

Originally Posted by Kirumira

Hello,
which is not working? Can you explain more

when installed in d:\program files\infinity\ast\ it not opening

http://forum.gsmhosting.com/vbb/f296...-open-2262304/

Yusuf Lawal · 11-01-2017, 14:03

Quote:

Originally Posted by LEENO

when installed in d:\program files\infinity\ast\ it not opening

http://forum.gsmhosting.com/vbb/f296...-open-2262304/

Dear LEENO, Infinity Folder located in C:// not in Program file....

LEENO · 11-01-2017, 14:05

Quote:

Originally Posted by Yusuf Lawal

Dear LEENO, Infinity Folder located in C:// not in Program file....

I know but when i install it i can select different flder. Selecting folder in d: it not launch

poojadooj · 11-01-2017, 14:10

pls.help xt 1643 frp v7.0

10-31-2017, 23:16	#1 (permalink)
GreenBoss Freak Poster Join Date: Jun 2011 Posts: 248 Member: 1607677 Status: Offline Thanks Meter: 272	Infinity-Box Android Service Tool / AST v1.02 - New models and features Infinity-Box Android Service Tool / AST v1.02 - New models and features ADB tab activated - Identify Allow read complete device info - Reset FRP Generic Android FRP reset over ADB - Set Device Mode Allow change device mode to: BOOTLOADER, RECOVERY, SIDELOAD, EDL Service ASUS FRP reset activated FastBoot -> Reset FRP -> ASUS Generic NOT all ASUS models supported! Send us reports to add more models. FastBoot protocol updated Other Protocol support ( adb/fastbot ) updated Flashing protocol updated ( moto ) Download link Upload file to Support Infinity-Box 12 years (2005 - 2017) updates and support as nobody else - News Twitter - Facebook - Telegram

11-01-2017, 12:37	#8 (permalink)
abdul.majid8186 Freak Poster Join Date: Jun 2016 Location: Lahore Posts: 186 Member: 2582370 Status: Offline Sonork: 100.1675531 Thanks Meter: 126	Good Update Team Add Moto Enable ADB for More Model..New version Not Supported like 6.x v7.x..I try this model But not Work. xt1096 5.1 xt1097 5.1 xt1585 7.0

11-01-2017, 07:18	#3 (permalink)
thilina bandara Junior Member Join Date: Mar 2012 Posts: 7 Member: 1736366 Status: Offline Thanks Meter: 5	Please be kind to update for new huawei phones boot loader unlocking and frp remove ability for y3 ii, y5 ii

11-01-2017, 11:46	#5 (permalink)
deepakkumar39 No Life Poster Join Date: Dec 2010 Location: INDIA Posts: 532 Member: 1464245 Status: Offline Thanks Meter: 176	please update mtk moto model....................

11-01-2017, 11:54	#6 (permalink)
DZcondor Freak Poster Join Date: Jan 2016 Age: 34 Posts: 274 Member: 2516015 Status: Offline Thanks Meter: 100	Please , we need MTK update for new CPU & Android OS .

11-01-2017, 11:59	#7 (permalink)
ahmer5050 No Life Poster Join Date: Apr 2015 Location: LOOLCANO Taba Day. Posts: 1,882 Member: 2385819 Status: Offline Sonork: No More Used Thanks Meter: 827	thnkx for the new update............Add Also MTK Chip

11-01-2017, 13:21	#9 (permalink)
biddut1979 Cheater -Don't Deal with him- Join Date: Feb 2004 Location: Bangladesh Age: 44 Posts: 723 Member: 54228 Status: Offline Thanks Meter: 76	Card found : 32663DC4 , v0136 Infinity-Box Android Service Tool [AST] v1.02 Operation : Identify [ v1.02 ] Waiting for device in fastboot mode ... 1. Power off device. Press and hold 'VOL DOWN' button 2. Insert USB cable, hold button until device will be found! Connect Ok! Main Info ============ CPU : MSM8952 CID : 0x0032 IMEI : 358187070856037 UID : C511BE0000000000000000000000 Model Info ============ DevModel : XT1643 IntName : athene_16mp SW Info ============ DevSWVer : Blur_Version.25.221.10.athene.retail.en.US DevQCVer : LA.BR.1.3.6-01710-8976.0 BaseBand : M8952_70030.25.03.62.01R ATHENE_INDIA_DSDS_CUST BootLDRv : moto-msm8952-B1.06 HW Info ============ eMMCInfo : 32GB SAMSUNG RX1BMB RV=08 PV=07 FV=0000000000000007 DRAMInfo : 3GB SAMSUNG LP3 DIE=6Gb M5=01 M6=05 M7=00 M8=7B Lock Info ============ WarrantyVoid : no FRP Lock : protected (77) Done! Elapsed: 00:00:24 Operation : Enable ADB (Moto) [ v1.02 ] Waiting for NetInterface arrival ... 1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons 2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON' 3. Connect USB cable, when device boot complete! Connect Ok! Waiting ... Trying link with : 192.168.137.2 Connected to device! Device : XT1643 VerInfo : ATHENE_INDIA_DSDS_CUST Version : Blur_Version.25.221.10.athene.retail.en.US Enabling ADB ... 1. Disconnect cable from device, press and hold 'VOLUME_DOWN' and 'POWER_ON' 2. Select 'FACTORY MODE' and press 'POWER ON'! 3. Wait for device boot completely! Done! Elapsed: 00:00:34 Operation : Reset FRP (ADB) [ v1.02 ] Waiting for device in ADB mode ... 1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need! 2. Insert USB cable, accept AUTH on PhoneScreen, if software ask! Device not found! Check cable, drivers and conection! Operation : Reset FRP [ v1.02 ] Mode : Remove ASUS GENERIC FRP Operation break by user request! Operation : Reset FRP [ v1.02 ] Mode : Remove QLM GENERIC FRP Waiting for device in fastboot mode ... 1. Power off device. Press and hold 'VOL DOWN' button 2. Insert USB cable, hold button until device will be found! Connect Ok! FRP Erase FAIL! Done! Elapsed: 00:01:11 Operation : Identify [ v1.02 ] Waiting for device in fastboot mode ... 1. Power off device. Press and hold 'VOL DOWN' button 2. Insert USB cable, hold button until device will be found! Connect Ok! Main Info ============ CPU : MSM8952 CID : 0x0032 IMEI : 358187070856037 UID : C511BE0000000000000000000000 Model Info ============ DevModel : XT1643 IntName : athene_16mp SW Info ============ DevSWVer : Blur_Version.25.221.10.athene.retail.en.US DevQCVer : LA.BR.1.3.6-01710-8976.0 BaseBand : M8952_70030.25.03.62.01R ATHENE_INDIA_DSDS_CUST BootLDRv : moto-msm8952-B1.06 HW Info ============ eMMCInfo : 32GB SAMSUNG RX1BMB RV=08 PV=07 FV=0000000000000007 DRAMInfo : 3GB SAMSUNG LP3 DIE=6Gb M5=01 M6=05 M7=00 M8=7B Lock Info ============ WarrantyVoid : no FRP Lock : protected (77) Done! Elapsed: 00:00:47 Operation : Enable ADB (Moto) [ v1.02 ] Waiting for NetInterface arrival ... 1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons 2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON' 3. Connect USB cable, when device boot complete! Connect Ok! Waiting ... Trying link with : 192.168.137.2 Connected to device! Device : XT1643 VerInfo : ATHENE_INDIA_DSDS_CUST Version : Blur_Version.25.221.10.athene.retail.en.US Enabling ADB ... 1. Disconnect cable from device, press and hold 'VOLUME_DOWN' and 'POWER_ON' 2. Select 'FACTORY MODE' and press 'POWER ON'! 3. Wait for device boot completely! Done! Elapsed: 00:00:10 Operation : Reset FRP (ADB) [ v1.02 ] Waiting for device in ADB mode ... 1. Connect device, enable 'DEVELOPER MODE' and 'USB DEBUG', if need! 2. Insert USB cable, accept AUTH on PhoneScreen, if software ask! Device not found! Check cable, drivers and conection!

11-01-2017, 13:34	#10 (permalink)
LEENO No Life Poster Join Date: Aug 2003 Location: Mars Age: 40 Posts: 2,139 Member: 38084 Status: Offline Thanks Meter: 115	still not working if installed in d:\program files\ it work in c:\infinitybox\ast

11-01-2017, 14:10	#15 (permalink)
poojadooj Freak Poster Join Date: Jan 2009 Location: INDIA,U.P.BALLIA Posts: 127 Member: 947347 Status: Offline Sonork: 100.108278 Thanks Meter: 21	pls.help xt 1643 frp v7.0