GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 11-13-2017, 04:49   #136 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 6,437
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,123

Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 18 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x00000001279F7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:19
  Reply With Quote
Old 11-13-2017, 04:49   #137 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 6,437
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,123
Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 18 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v3 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x00000001279F7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:18

Reconnect Power/Cable!
  Reply With Quote
Old 11-13-2017, 04:50   #138 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 6,437
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,123
Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert USB cable
2. Press and hold BootKey ( Skip, if use BootCable )
3. Insert battery

==== Wait for phone...

Phone found! [ 17 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending boot ...
Boot Sent , starting...
Boot Ver : Spreadtrum Boot Block version 1.2 -pBoot Ok
CPU ID : 6531 , FDLStat : 0100
[0] Flash DIE : 00EF 0040 0016 0000
[0] Flash VEN : Winbond , W25Q32
[0] Flash CAP : 00400000
Verify data... Can take some time
Init Ok, formatting DIN area ...
Format Block Done!
Done!

Elapsed: 00:00:38

Reconnect Power/Cable!
  Reply With Quote
Old 11-13-2017, 04:52   #139 (permalink)
No Life Poster
 
Nadeem Waris's Avatar
 
Join Date: Jul 2009
Location: SINDH PAKISTAN
Posts: 6,437
Member: 1080718
Status: Offline
Sonork: 100.1596539 QQ-2710826805
Thanks Meter: 2,123
Operation : Format File System / Reset Settings [ v1.27 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
-> Alternative : just ONE 'VolumeUp' or 'VolumeDown' key
3. Insert cable

==== Wait for phone...

Phone found! [ 18 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x00000001210F7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:24

Reconnect Power/Cable!
  Reply With Quote
Old 11-14-2017, 12:33   #140 (permalink)
Freak Poster
 
wafi95's Avatar
 
Join Date: Sep 2016
Location: **S♦A♦R**
Age: 25
Posts: 183
Member: 2621055
Status: Offline
Sonork: 100.1675233
Thanks Meter: 142
Quote:
Originally Posted by InfinityHelp View Post
Infinity-Box Chinese Miracle II SCR (SPD/RDA ServiceTool) v1.00 - SPD SC6533G support

New Module released - SpreadTrum/RDA Service Tool ( SCR )
Since RDA is outdated and sold (?) to SpreadTrum ( according code facts ) we decide to rebuild both SPD and RDA modules.
From now SCR module will contain ONLY Modern RDA and Spreadtrum Feature phones. SPD will contain ONLY SmartPhones.
That allow us bring our users new level of expirience and more new cool stuff. Stay tuned

Supported CPU and features:
Spreadtrum SC6533, SC6533G
- Read Info ( Check Boot, HW verify )
> Complete read info - include ALL device HW details, display info etc.
- Format FileSystem
> Fast and complete safe way to reset and restore phone settings
- Repair Security
> Allow repair device security items. This feature is restricted and unavialable in some countries!
- Read Firmware
> Read complete phone fw, automatic verify code and whole fw structure
> Read security settings, used to restore bricked/damaged phone functianlity
> Read calibration items, used to restore network, audio and other phone settings
- Write Firmware
> Support Infinity firmware format ( combined ilod )
> Support Factory RAW firmware format ( single lod )
> Support partial flashing for Infinity and Factory firmware

RDA Mirco: RDA8851 rev A,B,C,L,CL ( include latest revision 09 : CL )
RDA Micro: RDA8826
- Read Info ( Check Boot, HW verify )
> Complete read info, include ALL device HW details, display info etc.
- Format FileSystem
> Fast and complete safe way to reset and restore phone settings
- Repair Security
> Allow repair device security items. This feature is restricted and unavialable in some countries!
- Read Firmware
> Read complete phone fw, automatic verify code and whole fw structure
> Read security settings, used to restore bricked/damaged phone functianlity
> Read calibration items, used to restore network, audio and other phone settings
- Write Firmware
> Support Infinity FW format ( combined ilod )
> Support Factory RAW firmware format ( single lod )
> Support partial flashing for Infinity and Factory firmware

Signed drivers are in support area


Download link


Upload file to Support

Infinity-Box 12 years (2005 - 2017) updates and support as nobody else - News

Twitter - Facebook - Telegram
TEAM HELP ME
PROBLEM ALL LOADER CM2 SPD/MTK/QLM

NO BODY ANSWER FROM 48 HOUR ON THIS POST
Cm2 problem loader
  Reply With Quote
Old 11-19-2017, 16:01   #141 (permalink)
Junior Member
 
Join Date: Mar 2008
Posts: 5
Member: 723549
Status: Offline
Thanks Meter: 1
having problem with reading i7i pattern lock..cm2 info posted down plz help...

==== Wait for phone...

Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v4 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

FlashMode Set : Ok!
Reading PatternLock ...
[Info] : UserData is big! Result can be empty!
PatternLock Not Set!

Elapsed: 00:00:36

Reconnect Power/Cable!
  Reply With Quote
Old 11-20-2017, 06:19   #142 (permalink)
Product Supporter
 
Join Date: May 2005
Posts: 25,400
Member: 148515
Status: Offline
Thanks Meter: 16,158
New version released - Infinity-Box Chinese Miracle SCR/SPD-RDA v1.01 - SC6531E support and more
  Reply With Quote
Old 11-20-2017, 06:21   #143 (permalink)
Product Supporter
 
Join Date: May 2005
Posts: 25,400
Member: 148515
Status: Offline
Thanks Meter: 16,158
Quote:
Originally Posted by wafi95 View Post
TEAM HELP ME
PROBLEM ALL LOADER CM2 SPD/MTK/QLM

NO BODY ANSWER FROM 48 HOUR ON THIS POST
Cm2 problem loader
Why do you ignore questions and do not provide answer ?
We are waiting for a long time !
  Reply With Quote
Old 11-20-2017, 08:35   #144 (permalink)
Junior Member
 
Join Date: Mar 2008
Posts: 5
Member: 723549
Status: Offline
Thanks Meter: 1
waiting for reply....

Quote:
Originally Posted by dirty_king View Post
having problem with reading i7i pattern lock..cm2 info posted down plz help...

==== Wait for phone...

Phone found! [ 8 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SPRD 773x eMMC loader v4 Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

FlashMode Set : Ok!
Reading PatternLock ...
[Info] : UserData is big! Result can be empty!
PatternLock Not Set!

Elapsed: 00:00:36

Reconnect Power/Cable!
  Reply With Quote
Old 11-22-2017, 06:57   #145 (permalink)
Junior Member
 
Join Date: Mar 2008
Posts: 5
Member: 723549
Status: Offline
Thanks Meter: 1
any help ???i asked question above....
  Reply With Quote
Old 11-22-2017, 15:38   #146 (permalink)
No Life Poster
 
Join Date: Apr 2010
Location: chirala
Posts: 570
Member: 1293395
Status: Offline
Sonork: 100.1657302
Thanks Meter: 87
detel d900 lock reset and read frimwear done by cm2

hear is the log

Card found : A3B50E6B , v0136
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.01

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR


Load : Detel D900 SC6533G_4MiB_COMMON_TARGET_2017-05-20_102922.ilod
Device Info Details :
[0] : COMMON_TARGET
[1] : 8809
[2] : 8809e2
[3] : CT8851C
[4] : pasw_hs8292u
[5] : flsh_spi32m
[6] : st7735s/gc9102d_hsd_jym
[7] : bf3a01serial/byd3703_km
[8] : rdabt_8809
[9] : rdafm_8809e
[10] : release
[11] : 2017-05-20_10:29:22
[12] : test_version
Load Ok!

Operation : Identify [ v1.01 ]

----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...


Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Identify [ v1.01 ]

----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...


Device not found!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Reset Settings [ v1.01 ]
----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00200000
BOOT_INIT : 0x48F823EE
BOOT_MODE : UNKNOWN

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Reset Settings [ v1.01 ]
----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00200000
BOOT_INIT : 0x7CF823AA
BOOT_MODE : UNKNOWN

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v1.01 ]

----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00200000
BOOT_INIT : 0x58F823AE
BOOT_MODE : UNKNOWN

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read Flash [ v1.01 ]

----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
BOOT_INTV : 6533G-FPTRUNK-W16.48.2
InternalVersion: g0d6cbdbd
Setting BOOTROM mode
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Read done, 0x00400000

Verify FlashContent
MCU verified
CAL verified
FAC verified

Device Info Details :
[0] : COMMON_TARGET
[1] : 8809
[2] : 8809e2
[3] : CT8851C
[4] : pasw_hs8292u
[5] : flsh_spi32m
[6] : st7735s/gc9102d_hsd_jym
[7] : bf3a01serial/byd3703_km
[8] : rdabt_8809
[9] : rdafm_8809e
[10] : release
[11] : 2017-05-20_10:29:22
[12] : test_version

Saved to : C:\Users\Sri Vignasai Mobiles\Desktop\107\
Saved as : SC6533G_4MiB_COMMON_TARGET_2017-05-20_102922.ilod


Done!
Elapsed: 00:00:56

Reconnect Power/Cable!

Operation : Reset Settings [ v1.01 ]
----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00600000
BOOT_INIT : 0x81C0024C
BOOT_MODE : DOWNLOAD
BOOT_INTV : 6533G-FPTRUNK-W16.48.2
InternalVersion: g0d6cbdbd
Setting BOOTROM mode
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Preparing PMT
Verifying PMT
Erasing 1474560 bytes

FileSystem format done!


Done!
Elapsed: 00:00:26

Reconnect Power/Cable!
  Reply With Quote
Old 12-15-2017, 15:49   #147 (permalink)
Junior Member
 
Join Date: May 2017
Posts: 8
Member: 2715217
Status: Offline
Thanks Meter: 0
Info B310e SC6530

Card found : 748B734A , v0136
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.01

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR


Operation : Identify [ v1.01 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6530 Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!


Done!
Elapsed: 00:00:20

Reconnect Power/Cable!
  Reply With Quote
Old 12-17-2017, 06:56   #148 (permalink)
Insane Poster
 
Join Date: Jul 2017
Location: Bangladesh
Age: 24
Posts: 64
Member: 2740295
Status: Offline
Thanks Meter: 29
InfinityBox_install_CM2SCR_v1.01.7z

Download
  Reply With Quote
Old 12-20-2017, 06:02   #149 (permalink)
Freak Poster
 
ramongaru's Avatar
 
Join Date: Jul 2004
Location: nigeria
Age: 37
Posts: 256
Member: 73254
Status: Offline
Sonork: 100.1583566
Thanks Meter: 13
I don't know why I keep on sending message finding solution and cm2 team never attempt to my problem, what is the essence of buying your product if you cannot provide solution, this is more the 8month I have been requesting for solution. Too bad.. I am not happy at all, thus is not a small phone, I don't mind pay for solution.


telma RDA/COOLSAND 8851a, 8851cl network unlock, invalid sim or sim close

i have 2000 pieces as well, please is urgent

TELMA V034+
TELMA V034+DUO
TELMA X034+DUO

please find me solution.... is a small phone Feature phone

HERE ARE THE DUMP FILE

https://www.4shared.com/rar/fDEoqksF..._Read_out.html
  Reply With Quote
Old 12-20-2017, 11:10   #150 (permalink)
Product Supporter
 
Join Date: Jun 2009
Posts: 27,272
Member: 1043909
Status: Offline
Thanks Meter: 52,414
Quote:
Originally Posted by ramongaru View Post
I don't know why I keep on sending message finding solution and cm2 team never attempt to my problem, what is the essence of buying your product if you cannot provide solution, this is more the 8month I have been requesting for solution. Too bad.. I am not happy at all, thus is not a small phone, I don't mind pay for solution.


telma RDA/COOLSAND 8851a, 8851cl network unlock, invalid sim or sim close

i have 2000 pieces as well, please is urgent

TELMA V034+
TELMA V034+DUO
TELMA X034+DUO

please find me solution.... is a small phone Feature phone

HERE ARE THE DUMP FILE

https://www.4shared.com/rar/fDEoqksF..._Read_out.html
Dear Sir,

And what is the problem with your 2000 phones exactly ?
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 09:43.



Powered by Searchlight © 2020 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.43422 seconds with 8 queries

SEO by vBSEO