Infinity-Box LG Service Module LGS v1.02 - KDZ flasher, unlock and more

[nori2007]

H818P

Infinity-Box LG Service Tool [ LGS ] v1.02

Operation : Identify [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD VOLUME UP KEY!
3. Insert USB cable, wait until Download mode screen will appear

Wait for phone...
Connection opened successfully!
Waiting for loader ... 
Handshake passed!
Collect info... 

Running : MiniOS 3.0 , ver.1.1 , with proto ver.01000001
HWInfo  : BaseBand : MSM8992
HWInfo  : ChargeLv : 19%
HWInfo  : MEM_INFO : 032G74 , MEM_LEN : 0x03A3E000 [eMMC 32 GiB]
DevInfo : Model : LG-H818P , Type : H81820e
DevInfo : ANDROID 6.0
DevInfo :   PSN : SM06_156 , PID : LGH818_31
DevInfo : IMEI  : 35xxxxxxxx33
DevInfo : SecMode : S , Build : U , RCT : 000F4240
SWInfo  : SWver : V20e , SW : LGH818PAT-00-V20e-AME-XX-APR-28-2016+0
SWInfo  : FacSW : LGH818PAT-00-V20e-DS2-SI-APR-28-2016+0
RegInfo : Region : COM , Provider : GLOBAL

Prepare passed, mode 0x01
Boot done!


Brand     : lge
ProdName  : p1_global_com
ProdModel : LG-H818
Device    : p1
AndroidVer: 6.0
SWVersion : LGH818AT-00-V20e-GLOBAL-COM-APR-28-2016+0
Manufact. : LGE
LGMxCPU   : MSM8992

Done!
Elapsed: 00:00:17

Operation : Read Firmware [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD VOLUME UP KEY!
3. Insert USB cable, wait until Download mode screen will appear

Wait for phone...
Connection opened successfully!
Waiting for loader ... 
Handshake passed!
Collect info... 
Prepare passed, mode 0x01
Boot done!

DevInfo : MSM8992__LG-H818P__H81820e__V20e__AOSv6.0__LGH818PAT-00-V20e-DS2-SI-APR-28-2016+0

Reading Flash Content ... 
[Read Ok] : gpt_main.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : pmic.bin
[Read Ok] : sbl1.mbn
[Read Ok] : tz.mbn
[Read Ok] : deploy.mbn
[Read Ok] : hyp.mbn
[Read Ok] : rpm.mbn
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : misc.img
[Read Ok] : persist.img
[Read Ok] : fs_gc.img
[Read Ok] : ddr.bin
[Read Ok] : sec.dat
[Read Ok] : laf.img
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : persist_lg.img
[Read Ok] : calibration.img
[Read Ok] : fact.img
[Read Ok] : rawdata.img
[Read Ok] : system.img
[Read Ok] : cust.img
[Read Ok] : gpt_backup.bin

Android Info saved!
Read finished!
Configuration : MSM8992 / 6.0 / V20e
Firmware Size : 4526 MiB

Done!
Elapsed: 00:09:37

[appsworlmardan]

hi team this error comes by the backup of lg470k

[JayDi]

@appsworlmardan, check you smartcard. It related to card connection problems.

[appsworlmardan]

dear jaidi what can i do .

[muhammad khalid]

Operation : Identify [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD VOLUME UP KEY!
3. Insert USB cable, wait until Download mode screen will appear

Wait for phone...
Connection opened successfully!
Waiting for loader ...
Handshake passed!
Collect info...

Running : MiniOS 3.0 , ver.1.1 , with proto ver.01000004
HWInfo : BaseBand : MSM8974
HWInfo : ChargeLv : 65%
HWInfo : MEM_INFO : 032GE4 , MEM_LEN : 0x03A3E000 [eMMC 32 GiB]
DevInfo : Model : LG-D852 , Type : D85230g
DevInfo : ANDROID 6.0
DevInfo : PSN : BS09S150328003364 , PID : LGD85296ae6a1a
DevInfo : IMEI : 354608063018792
DevInfo : SecMode : S , Build : U , RCT : 000F4240
SWInfo : SWver : V30g , SW : LGD852AT-01-V30g-302-220-JUL-21-2016+0
SWInfo : FacSW : LGD852AT-00-V30g-TLS-CA-JUL-21-2016+0
RegInfo : Region : CA , Provider : TLS

Prepare passed, mode 0x01
Boot done!


Brand : lge
ProdName : g3_tls_ca
ProdModel : LG-D852
Device : g3
AndroidVer: 6.0
SWVersion : LGD852AT-00-V30g-TLS-CA-JUL-21-2016+0
Manufact. : LGE
LGMxCPU : MSM8974

Done!
Elapsed: 00:00:33

Operation : Read Firmware [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD VOLUME UP KEY!
3. Insert USB cable, wait until Download mode screen will appear

Wait for phone...
Connection opened successfully!
Waiting for loader ...
Handshake passed!
Collect info...
Prepare passed, mode 0x01
Boot done!

DevInfo : MSM8974__LG-D852__D85230g__V30g__AOSv6.0__LGD852AT-00-V30g-TLS-CA-JUL-21-2016+0

ReportFile : C:\InfinityBox\LGS\LGM_report.log
Send report to mail : [email protected] with title "LGFW" !

Info : Device is not supported yet!
Send log and report.log (if exists) to support! Include device info also!

Reconnect Power/Cable!

thanks to you all by gsmzaman

[muhammad khalid]

Operation : Identify [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD VOLUME UP KEY!
3. Insert USB cable, wait until Download mode screen will appear

Wait for phone...
Connection opened successfully!
Waiting for loader ...
Handshake passed!
Collect info...

Running : MiniOS 3.0 , ver.1.1 , with proto ver.01000004
HWInfo : BaseBand : MSM8974
HWInfo : ChargeLv : 64%
HWInfo : MEM_INFO : 032GE4 , MEM_LEN : 0x03A3E000 [eMMC 32 GiB]
DevInfo : Model : LG-D852 , Type : D85230g
DevInfo : ANDROID 6.0
DevInfo : PSN : BS09S150328003364 , PID : LGD85296ae6a1a
DevInfo : IMEI : 354608063018792
DevInfo : SecMode : S , Build : U , RCT : 000F4240
SWInfo : SWver : V30g , SW : LGD852AT-01-V30g-302-220-JUL-21-2016+0
SWInfo : FacSW : LGD852AT-00-V30g-TLS-CA-JUL-21-2016+0
RegInfo : Region : CA , Provider : TLS

Prepare passed, mode 0x01
Boot done!


Brand : lge
ProdName : g3_tls_ca
ProdModel : LG-D852
Device : g3
AndroidVer: 6.0
SWVersion : LGD852AT-00-V30g-TLS-CA-JUL-21-2016+0
Manufact. : LGE
LGMxCPU : MSM8974

Done!
Elapsed: 00:00:13

Operation : SP Unlock [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD VOLUME UP KEY!
3. Insert USB cable, wait until Download mode screen will appear

Wait for phone...
Connection opened successfully!
Waiting for loader ...
Handshake passed!
Collect info...
Prepare passed, mode 0x01
Boot done!


Info : Device is not supported yet!
Device not supported for selected operation!

Reconnect Power/Cable!

Pls add above model in next.. thanks


thanks to you all by gsmzaman

[cellncare]

Operation : Identify [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD VOLUME UP KEY!
3. Insert USB cable, wait until Download mode screen will appear

Wait for phone...
Connection opened successfully!
Waiting for loader ...
Handshake passed!
Collect info...

Running : MiniOS v1.0 , ver.1.0 , with proto ver.01000001
HWInfo : BaseBand : MSM8610
HWInfo : ChargeLv : 68%
HWInfo : MEM_INFO : H4G1d , MEM_LEN : 0x00748000 [eMMC 4 GiB]
DevInfo : Model : LG-D380 , Type : D38010f
DevInfo : ANDROID 4.4.2
DevInfo : IMEI : 354106061396096
DevInfo : SecMode : U , Build : U , RCT : 0010C8E5
SWInfo : SWver : V10f , SW : LGD380AT-00-V10f-OP1-SI-APR-25-2016+0
SWInfo : FacSW : LGD380AT-00-V10f-OP1-SI-APR-25-2016+0
RegInfo : Region : COM , Provider : GLOBAL

Prepare passed, mode 0x00
Boot done!


Brand : lge
ProdName : w6ds_global_com
ProdModel : LG-D380
Device : w6ds
AndroidVer: 4.4.2
SWVersion : LGD380AT-00-V10f-GLOBAL-COM-APR-25-2016+0
Manufact. : LGE
LGMxCPU : MSM8610

Done!
Elapsed: 00:00:47


Loading firmware ...
FType : KDZ file
Model : LG-D380
Version : D38010f
SWInfo : user
BB_Gen : QLM
File [0] : PrimaryGPT_0.bin
File [1] : modem_8192.bin
File [2] : sbl1_139264.bin
File [3] : rpm_141312.bin
File [4] : tz_142336.bin
File [5] : sdi_143360.bin
File [6] : aboot_144384.bin
File [7] : rpmb_148480.bin
File [8] : tzb_149504.bin
File [9] : abootb_150528.bin
File [10] : persist_204800.bin
File [11] : laf_270336.bin
File [12] : boot_319488.bin
File [13] : recovery_364544.bin
File [14] : factory_475136.bin
File [15] : sbl1b_581632.bin
File [16] : cust_655360.bin
File [17] : system_770048.bin
File [18] : system_1036984.bin
File [19] : system_1298352.bin
File [20] : system_1561272.bin
File [21] : system_1822640.bin
File [22] : system_2085560.bin
File [23] : system_2346928.bin
File [24] : system_2609848.bin
File [25] : system_2871216.bin
File [26] : system_3134136.bin
File [27] : system_3395504.bin
File [28] : system_3653632.bin
File [29] : system_3657648.bin
File [30] : BackupGPT_7633920.bin

Load Ok!

Operation : Flash [ v1.02 ]
Forced Flash : Disabled
Save UserContent : Disabled

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD VOLUME UP KEY!
3. Insert USB cable, wait until Download mode screen will appear

Wait for phone...
Connection opened successfully!
Waiting for loader ...
Handshake passed!
Collect info...
Prepare passed, mode 0x00
Boot done!

Loading firmware
Load ok!
Checking compatibility
Checking passed!
Prepare device
Prepare Passed!
Secure prepare skipped!

Start flashing device

Flash : PrimaryGPT_0.bin
Flash : modem_8192.bin
Flash : sbl1_139264.bin
Flash : rpm_141312.bin
Flash : tz_142336.bin
Flash : sdi_143360.bin
Flash : aboot_144384.bin
Flash : rpmb_148480.bin
Flash : tzb_149504.bin
Flash : abootb_150528.bin
Flash : persist_204800.bin
Flash : laf_270336.bin
Flash : boot_319488.bin
Flash : recovery_364544.bin
Flash : factory_475136.bin
Flash : sbl1b_581632.bin
Flash : cust_655360.bin
Flash : system_770048.bin
Flash : system_1036984.bin
Flash : system_1298352.bin
Flash : system_1561272.bin
Flash : system_1822640.bin
Flash : system_2085560.bin
Flash : system_2346928.bin
Flash : system_2609848.bin
Flash : system_2871216.bin
Flash : system_3134136.bin
Flash : system_3395504.bin
Flash : system_3653632.bin
Flash : system_3657648.bin
Flash : BackupGPT_7633920.bin

Processing Post-Flashing tune
Flash done!

Reconnect Power/Cable!

Done!
Elapsed: 00:03:02

[Relica1]

Originally Posted by JayDi

Yes, sure. This mobiles will works well for KDZ/DZ flashing.
Also old one, based on MT65xx supported, except X-series and MT6575/MT6572, they are very old. But they can be serviced in our other module - MTK.
Some LG can be also repaired with QLM module. But LGS is main for servicing and repair.

here is my problem can you help me about the solution i tried kdz/dz fies

here is the logs:
Card found : 93570652 , v0135
Infinity-Box LG Service Tool [ LGS ] v1.02

Loading firmware ...

Firmware load error!
Firmware damaged or in unknown format!

[.:asmat:.]

Operation : Read Firmware [ v1.02 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD VOLUME UP KEY!
3. Insert USB cable, wait until Download mode screen will appear

Wait for phone...
Connection opened successfully!
Waiting for loader ...
Handshake passed!
Collect info...
Prepare passed, mode 0x00
Boot done!

DevInfo : MSM8974__LG-D851__D85110r__V10rro.l__AOSv4.4.2__LGD851AT-00-V10r-GLOBAL-COM-OCT-22-2014-32G+0

Reading Flash Content ...
[Read Ok] : gpt_main.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : dbi.mbn
[Read Ok] : ddr.bin
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : boot.img
[Read Ok] : persist.img
[Read Ok] : recovery.img
[Read Ok] : misc.img
[Read Ok] : laf.img
[Read Ok] : persist_lg.img
[Read Ok] : calibration.img
[Read Ok] : carrier.img
[Read Ok] : fact.img
[Read Ok] : system.img
[Read Ok] : gpt_backup.bin

Android Info saved!
Read finished!
Configuration : MSM8974 / 4.4.2 / V10rro.l
Firmware Size : 3006 MiB

Done!
Elapsed: 00:03:25

[Jastech]

Read Info Ok LG4 H812



But Read Firmware Not Supported Yet

[SAJONDUTTA]

lg d380 now show 9008 driver can flash kdz file and dead recover

[JayDi]

Originally Posted by SAJONDUTTA

lg d380 now show 9008 driver can flash kdz file and dead recover

Use QLM module for repair boot, then flash with LGS.

[SAJONDUTTA]

Originally Posted by JayDi

Use QLM module for repair boot, then flash with LGS.

sir plz explain me how to repair to use
qlm tool

[SAJONDUTTA]

Originally Posted by SAJONDUTTA

sir plz explain me how to repair to use
qlm tool

now weating .................

[SAJONDUTTA]

jaydi sir i am weating for ur lg boot repair tutorial to use qlm