Infinity Chinese Miracle-2 MTK/Mediatek v2.03 - MT817x Series support, new features - Page 4 - GSM-Forum

chandanps18 · 01-03-2019, 12:25

Quote:

Originally Posted by GODISTHEBEST

ok thank you but i knew that so i am asking if ...
CM2 is the addition software of miracle box ? or it infinity product that diffrant from "miracle box" ?

Both are different box from different manufacturer. And the truth is CM2 is genuine working to while the other use just there copy paste tool..

GODISTHEBEST · 01-03-2019, 15:19

Quote:

Originally Posted by chandanps18

Both are different box from different manufacturer. And the truth is CM2 is genuine working to while the other use just there copy paste tool..

SO I UNDERSTAND THAT ALL THAT miraaacle box have the CM2 for sure have it ?

haider420 · 01-04-2019, 07:46

pleas team update spd also

ali-f16 · 01-04-2019, 07:56

Scanning devices ...1 found
dev[1] b131076b7d28
Mode: normal
Hardware: mt6765
Manufactory: XIAOMI
Model: REDMI 6A

Error : Fail to init protocol!

Operation : Identify [ v2.03 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM98)
MODE : BOOTROM
PORT : 98
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E7
BROM : SecMode : SBC+SLA+SDA+ARB
BROM : BOOTROM
MODE : 0_base : BASE_v1844 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6765
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00000001 : DA SEND ERROR!
ERROR : BROM : DL MODE ERROR
INFO : BROM Level : SLA AUTH or AUTH required!

Error : Fail to init protocol!
Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

moniuzzaman · 01-04-2019, 14:55

symphony v20 format done

Card found : 64C1CE3F , v0137
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.03

Load IDBase v123080 Ok!

Update configuration ...
Socket Error # 11001
Host not found.
Update failed! Check settings and/or internet connection!

Operation : Identify [ v2.03 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM9)
MODE : PRELOADER PORT
PORT : 9
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6570
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]

EMMC: 7001004D36323730340112DC4101446B
EMMC: VEN : KINGSTON | OEM : 01 | DEV : M62704
EMMC:
BOOT1 : 0x00200000 [ 2.00 MB ]
BOOT2 : 0x00200000 [ 2.00 MB ]
RPMB : 0x00080000 [ 512.00 KB ]
USER : 0xE2000000 [ 3.53 GB ]

CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : FF82FBE4D93700D8FF3AB9C0A837A440

DA : USB : HIGH-SPEED

Boot done!

Patch Level : MRA58K
Display ID : V20_HW1_V6
Ver. CodeName : REL
Ver. Release : 6.0
Sec. Patch : 2017-05-05
Build Time : 1495765973
Product Model : roar V20
Product Brand : Symphony
Product Name : full_sr6570_cweg_m
Product Device : roar V20
Product Manfct : Symphony
Board Platform : mt6570
Product Info : sr6570_cweg_m

USERDATA : PLAIN ( NOT encrypted )

Done!
Elapsed: 00:00:28

Operation : Reset Settings/Format FS [ v2.03 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM Port (COM9)
MODE : PRELOADER PORT
PORT : 9
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : PRELOADER PORT
MODE : 0_base : BASE_v1712 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6570
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]

EMMC: 7001004D36323730340112DC4101446B
EMMC: VEN : KINGSTON | OEM : 01 | DEV : M62704
EMMC:
BOOT1 : 0x00200000 [ 2.00 MB ]
BOOT2 : 0x00200000 [ 2.00 MB ]
RPMB : 0x00080000 [ 512.00 KB ]
USER : 0xE2000000 [ 3.53 GB ]

CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000

RNID : FF82FBE4D93700D8FF3AB9C0A837A440

DA : USB : HIGH-SPEED

Boot done!

Format Ok : USERDATA
Format Ok : CACHE
Format Ok : RESET PROTECTION
Format Ok : USERDATA

Done!
Elapsed: 00:00:22

Reconnect Power/Cable!

YellowBoss · 01-04-2019, 15:50

Quote:

Originally Posted by haider420

pleas team update spd also

Dear Sir,
Let me remind you that current thread is about MTK but as a exception your request has been forwarded to development department.

YellowBoss · 01-04-2019, 15:53

Quote:

Originally Posted by GODISTHEBEST

SO I UNDERSTAND THAT ALL THAT miraaacle box have the CM2 for sure have it ?

I understand nothing.
What do you want to ask ?

If you need good software see this - https://www.infinity-box.com/price.php

kamal_singla · 01-05-2019, 06:57

Quote:

Originally Posted by sakabeloha

Operation : Identify [ v2.03 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM23)
MODE : BOOTROM
PORT : 23
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6739 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BOOTROM
MODE : 0_base : BASE_v1844 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA.bin
AGENT : Found MT6739
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : INFINITY
EMI : SRC : INFINITY-BOX_INTERNAL_EMIDB_v0
EMI : CNT : 0003
EMI : Init EMI from INTERNAL DB
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...

DA : BOOT 2ND DA FAILED!
ERR : 0xC0070004
ERR : DA_HASH_MISMATCH

Error : Fail to init protocol!
Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

try once without hold any key in preloader mode and post logs

faisal naeem · 01-05-2019, 09:24

Quote:

Originally Posted by mathugu2030@gma

MT2 v203 not open mistake foud somewhere

M2MT2 2.3 not openning solution here

...

YellowBoss · 01-05-2019, 13:35

@faisal naeem
link removed to avoid confusion and misunderstanding.
the only solution is - install latest CM2MT2 software from support area.

alzam · 01-06-2019, 02:40

Please support for flashing oppo and vivo new security model..

thanks infinity team

ashish800 · 01-06-2019, 10:54

lovely my super best team ..nice nice update

ARS.Rehman · 01-06-2019, 11:45

Quote:

Originally Posted by YellowBoss

please post operation log text with this device. Thank you !

oppo f5 cph1723

PTFN : PreLoader USB VCOM (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : PRELOADER PORT
MODE : Oppo : F5 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00002001 : DA SEND ERROR!
ERROR : SECURE BOOT : MISMATCH BOOT SIGNATURE!
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO/SWSEC

Error : Fail to init protocol!
Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

imranidrisi · 01-06-2019, 19:22

Quote:

Originally Posted by ARS.Rehman

oppo f5 cph1723

PTFN : PreLoader USB VCOM (Android) (COM3)
MODE : PRELOADER PORT
PORT : 3
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : PRELOADER PORT
MODE : Oppo : F5 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...

BROM : 0x00002001 : DA SEND ERROR!
ERROR : SECURE BOOT : MISMATCH BOOT SIGNATURE!
INFO : PRELOADER Level : CORRECT DA required : PL/PL_CRYPTO/SWSEC

Error : Fail to init protocol!
Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

Force bootrom mode....open phone and short

Go here...

http://forum.gsmhosting.com/vbb/f296...patch-2527460/

isaiahmkandawir · 01-07-2019, 10:24

Operation : Identify [ v2.03 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek DA USB VCOM Port (COM22)
MODE : PRELOADER PORT
PORT : 22
Error : Failed to open port!

Error : Fail to init protocol!
Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!

01-07-2019, 10:24	#60 (permalink)
isaiahmkandawir Junior Member Join Date: Apr 2016 Posts: 2 Member: 2560322 Status: Offline Sonork: hello guys this is isaiah Thanks Meter: 0	just by clicking identify this pops up without the phone being connected Operation : Identify [ v2.03 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek DA USB VCOM Port (COM22) MODE : PRELOADER PORT PORT : 22 Error : Failed to open port! Error : Fail to init protocol! Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation! Reconnect Power/Cable!

01-04-2019, 07:46	#48 (permalink)
haider420 Freak Poster Join Date: Aug 2014 Location: south africa Posts: 174 Member: 2243017 Status: Offline Thanks Meter: 29	pleas team update spd also

01-04-2019, 07:56	#49 (permalink)
ali-f16 Freak Poster Join Date: Oct 2012 Location: IRAN.IR ----عل Posts: 265 Member: 1824614 Status: Offline Sonork: ali_f*******[email protected] Thanks Meter: 112	Scanning devices ...1 found dev[1] b131076b7d28 Mode: normal Hardware: mt6765 Manufactory: XIAOMI Model: REDMI 6A Error : Fail to init protocol! Operation : Identify [ v2.03 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MTK USB Port (COM98) MODE : BOOTROM PORT : 98 Waiting BOOT ack ... BROM : Skip ACK verify BROM : Init BROM BROM init passed! CHIP : MT6765 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x000000E7 BROM : SecMode : SBC+SLA+SDA+ARB BROM : BOOTROM MODE : 0_base : BASE_v1844 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6765 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : 0x00000001 : DA SEND ERROR! ERROR : BROM : DL MODE ERROR INFO : BROM Level : SLA AUTH or AUTH required! Error : Fail to init protocol! Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation! Reconnect Power/Cable!

01-04-2019, 14:55	#50 (permalink)
moniuzzaman Freak Poster Join Date: Dec 2008 Posts: 247 Member: 931121 Status: Offline Thanks Meter: 100	symphony v20 format done Card found : 64C1CE3F , v0137 Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.03 Load IDBase v123080 Ok! Update configuration ... Socket Error # 11001 Host not found. Update failed! Check settings and/or internet connection! Operation : Identify [ v2.03 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM9) MODE : PRELOADER PORT PORT : 9 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT MODE : 0_base : BASE_v1712 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6570 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00020000 [ 128.00 KB ] DRAM: 0x20000000 [ 512.00 MB ] EMMC: 7001004D36323730340112DC4101446B EMMC: VEN : KINGSTON \| OEM : 01 \| DEV : M62704 EMMC: BOOT1 : 0x00200000 [ 2.00 MB ] BOOT2 : 0x00200000 [ 2.00 MB ] RPMB : 0x00080000 [ 512.00 KB ] USER : 0xE2000000 [ 3.53 GB ] CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : FF82FBE4D93700D8FF3AB9C0A837A440 DA : USB : HIGH-SPEED Boot done! Patch Level : MRA58K Display ID : V20_HW1_V6 Ver. CodeName : REL Ver. Release : 6.0 Sec. Patch : 2017-05-05 Build Time : 1495765973 Product Model : roar V20 Product Brand : Symphony Product Name : full_sr6570_cweg_m Product Device : roar V20 Product Manfct : Symphony Board Platform : mt6570 Product Info : sr6570_cweg_m USERDATA : PLAIN ( NOT encrypted ) Done! Elapsed: 00:00:28 Operation : Reset Settings/Format FS [ v2.03 ] 1. Make sure device is powered off. Power off, if need. Wait 20 seconds after 2. Insert USB cable in phone Waiting for device connection ... PTFN : MediaTek PreLoader USB VCOM Port (COM9) MODE : PRELOADER PORT PORT : 9 Waiting BOOT ack ... PRELOADER : ACK confirmed! BROM : Init BROM BROM init passed! CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 TYPE : MODERN RAPHAEL BROM : SecLevel : 0x00000000 BROM : SecMode : PLAIN [+PRL] BROM : PRELOADER PORT MODE : 0_base : BASE_v1712 \| Manual : Disabled AGENT : Look for suitable BootChain in DA ... AGENT : MTK_AllInOne_DA.bin AGENT : Found MT6570 AGENT : MTK_DOWNLOAD_AGENT BROM : Sending 1st DA ... BROM : DA sent BROM :Transfer control to DA ... DA : AGENT started! DA : SYNC DA : MODE : PRELOADER DA : EXT_RAM initialized! DA : BOOT to 2nd DA ... DA : 2ND stage confirmed! DA : SYNC with DA passed! DA : Receiving HW info SRAM: 0x00020000 [ 128.00 KB ] DRAM: 0x20000000 [ 512.00 MB ] EMMC: 7001004D36323730340112DC4101446B EMMC: VEN : KINGSTON \| OEM : 01 \| DEV : M62704 EMMC: BOOT1 : 0x00200000 [ 2.00 MB ] BOOT2 : 0x00200000 [ 2.00 MB ] RPMB : 0x00080000 [ 512.00 KB ] USER : 0xE2000000 [ 3.53 GB ] CHIP : MT6570 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000 RNID : FF82FBE4D93700D8FF3AB9C0A837A440 DA : USB : HIGH-SPEED Boot done! Format Ok : USERDATA Format Ok : CACHE Format Ok : RESET PROTECTION Format Ok : USERDATA Done! Elapsed: 00:00:22 Reconnect Power/Cable!

01-05-2019, 13:35	#55 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,472 Member: 1043909 Status: Offline Thanks Meter: 60,926	@faisal naeem link removed to avoid confusion and misunderstanding. the only solution is - install latest CM2MT2 software from support area.

01-06-2019, 02:40	#56 (permalink)
alzam Junior Member Join Date: Sep 2014 Location: indonesia Posts: 22 Member: 2256516 Status: Offline Thanks Meter: 3	Please support for flashing oppo and vivo new security model.. thanks infinity team

01-06-2019, 10:54	#57 (permalink)
ashish800 No Life Poster Join Date: Feb 2013 Location: U.P-75 ETAWAH Age: 34 Posts: 2,068 Member: 1889562 Status: Offline Thanks Meter: 617	lovely my super best team ..nice nice update