GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 01-29-2019, 10:23   #1 (permalink)
Product Supporter
 
Join Date: May 2005
Posts: 24,121
Member: 148515
Status: Offline
Thanks Meter: 13,684
Infinity Chinese Miracle-2 MTK/Mediatek v2.04 - New chips and new features activated


Infinity Chinese Miracle-2 MTK/Mediatek v2.04 - New chips support and new features activated

Base:
Base - MT6761 support activated
Base - MT6765 support activated
Base - MT6771 support activated
Base - Secure boot - ARB verification during boot ( via BROM logging )
Base - Secure boot - SLA challenge state verify ( pass-trought file or nonce challenge )

FWFlasher:
FWFlasher - Some ancient secure devices flashing optimized ( early 6572 and similar )
FWFlasher - MT6753/MT6752 flashing revized
FWFlasher - Pre-flash backup option enabled
FWFlasher - Flash core updated

FWReader:
FWReader - More accurate FW verification for signed types ( issues after FOTA "garbaging" )
FWReader - ARB state and version, if present ARB bit
FWReader - AVB state and version, if present AVB secure mechanism
FWReader - FW logging info - if SW show it during load - make sure device contain SAME or LOWER version!
FWReader - More types supported for safe read
FWReader - Info reading improved

Service:
Service - Security repair revised ( NVRAM verify and some "old" types support )
Service - "Repair BaseBand" option activated
Service - Format FS revised
Service - NVRAM module updated

MemoryTool:
MemTool - Improved work with partitions on LEGACY line
MemTool - Wipe operation optimized ( def and adr mode )

Platform:
Platform - MT6761 support activated [ Under test ]
Platform - MT6771 support activated
Platform - MT6765 support activated
Platform - MT6753 support optimized
Platform - MT8172 support optimized
Platform - MT8176 support optimized
Platform - MT8163 support optimized
Platform - MT8127 support optimized

Loaders:
LoaderDB - New agents included ( Moto, Huawei, ZTE, Asus and others )

Other:
Other - Lot of different small changes and fixes
Other - BootHelper updated
Other - ErrorHandling updated - more detailed hints/explanation of troubles during service process
Other - EMI Module updated - MT6765/MT6771/MT8176/MT8172/MT8173/MT6753 supported
Other - Automatic backup during Identify and critical operations ( list can be tuned via edit settings.ini )
Other - Partial LEGACY NAND support ( complete boot/verify ) for testing purposes for now - MT6580, MT81xx series
Other - All settings ( except FLASH tab and Platform Settings group ) now saved/load automatically

Many thanks to: bRkA, gracy_elec and other our users for providing files and/or testing



Download link




- How to upload files to support
- Read Infinity News

Infinity-Box 14 years (2005 - 2019) updates and support as nobody else !

Last edited by InfinityHelp; 01-29-2019 at 10:37.
  Reply With Quote
The Following 99 Users Say Thank You to InfinityHelp For This Useful Post:
Show/Hide list of the thanked
Old 01-29-2019, 10:40   #2 (permalink)
No Life Poster
 
gracy_elec's Avatar
 
Join Date: Feb 2005
Location: GSM WORLD
Posts: 1,689
Member: 118520
Status: Offline
Thanks Meter: 2,736
Smile THANKs

THANKS @JayDi SIR
THANKS @INFINITY-BOX TEAM

1)NEW UPDATE IS FOR BOTH OLD & NEW CPU (IF ANY BUGS FOUND REPORT IT TEAM WILL FIXED IN THEIR UPCOMING UPDATES SO BE PATIENT)
2)FOR THOSE USERS NEW UPDATE ASK FOR DONGLE UPDATE CHECK SUPPORT VALIDATION DATE IF VALID THEN UPDATE IF EXPIRED THEN DONT UPDATE FIRST RENEWED AND THEN UPDATE
3)IF YOU GET ANY ERROR WHILE CONECTING THE OLD SECURITY PHONE THEN YOU CAN ALSO TRY IN OLD VERSION OF CM2 V1.58(STEP BY STEP TEAM IS SHIFTING CM2 V1.58 FEATURES TO NEW TOOL UPDATES)
4)IF YOU STILL HAVE ANY PROBLEM OR ERROR POST OPRATION LOGS FROM START TO END WHAT YOU HAVE DONE WITH PHONE FOR BETTER HELP FROM TEAM WITH PROPER TITLE WITH PHONE MODEL AND CPU TO GET SOLUTION FOR YOUR PROBLEM
5)IMPORTANT NOTES ALWAYS READ FULL INFO OF PHONE BEFORE DOING ANY OPRATION TAKE NECESSARY BACKUP FOR SAFER SIDE
6)DAY BYE DAY NEW PHONE CPU WITH BUGS SECURITY OS COMING SO TEAM IS TRYING THEIR HARD WORK TO GIVE YOU UPDATES AND TRYING TO SLOVE YOUR PROBLEM (WORK IN PROGRESS TEAM ARE NOT WORLD FIRST BUT TEAM ARE TRYING TO WORK OUT TO SLOVE YOUR PROBLEM BECAUSE PROBLEM SHOULD SLOVE THIS IS MORE IMPORTANT FOR TEAM BECAUSE TEAM WANT BIG SMILE ON YOUR FACE AND THE OWNER OF THE PHONE FACE)
7)LAST POINT WHICH NO ONE TRY BUT I WILL REQUEST TO ALL USERS TRY TO READ TRY TO LEARN & TRY TO SEARCH IF NOT GET ANY SOLUTIONS THEN MAKE NEW THREAD WITH PROPER TITLE WITH PHONE MODEL AND CPU TO GET SOLUTION FOR YOUR PROBLEM FROM TEAM & OTHER USERS
8)IF SOMEONE GETS HURTED FROM THIS I WILL EXTREMELY SORRY AND APOLOGIZE

GOOD LUCK!
____________________
WORKING ON MY BRAIN
  Reply With Quote
The Following 40 Users Say Thank You to gracy_elec For This Useful Post:
Show/Hide list of the thanked
Old 01-29-2019, 11:11   #3 (permalink)
Junior Member
 
Join Date: Jan 2018
Posts: 28
Member: 2803352
Status: Offline
Thanks Meter: 7
Thanks Team nice update
Plz Add oppo new models . . . .
  Reply With Quote
The Following 3 Users Say Thank You to faisal naeem For This Useful Post:
Show/Hide list of the thanked
Old 01-29-2019, 11:11   #4 (permalink)
Junior Member
 
Join Date: Oct 2018
Posts: 8
Member: 2869756
Status: Offline
Thanks Meter: 5
Am waiting for spd please please update spd
  Reply With Quote
The Following 4 Users Say Thank You to ITECS For This Useful Post:
Show/Hide list of the thanked
Old 01-29-2019, 11:22   #5 (permalink)
No Life Poster
 
ahmer5050's Avatar
 
Join Date: Apr 2015
Location: K.P.K ,Pakistan
Posts: 1,064
Member: 2385819
Status: Offline
Sonork: No More Used
Thanks Meter: 410
Very Good Update .....
Plz Team Some Foucus SPD And Qualcomm .
Thanxx.
  Reply With Quote
The Following 5 Users Say Thank You to ahmer5050 For This Useful Post:
Show/Hide list of the thanked
Old 01-29-2019, 11:24   #6 (permalink)
No Life Poster
 
nessyb's Avatar
 
Join Date: Jan 2013
Location: South Africa
Posts: 1,298
Member: 1866877
Status: Offline
Sonork: 100.1681933
Thanks Meter: 454
Service - "Repair BaseBand" option activated

Boom update Now waiting for one click privacy remove in new module
  Reply With Quote
The Following 2 Users Say Thank You to nessyb For This Useful Post:
Old 01-29-2019, 11:42   #7 (permalink)
No Life Poster
 
Kirumira's Avatar
 
Join Date: Dec 2004
Location: Uganda
Posts: 2,686
Member: 96478
Status: Offline
Sonork: 100.1674604
Thanks Meter: 1,206
Quote:
WORKING ON MY BRAIN

NOTE:Also Mt2 v2.xx versions needs more BRAIN than Plug & play existing softwares on market.
Thanks Bro Alex- bRkA, gracy_elec,Jaydi & Infinity Team.
  Reply With Quote
The Following 4 Users Say Thank You to Kirumira For This Useful Post:
Show/Hide list of the thanked
Old 01-29-2019, 12:08   #8 (permalink)
Junior Member
 
Join Date: Aug 2017
Posts: 21
Member: 2743644
Status: Offline
Thanks Meter: 1
plz fix unable to open software mtk2
  Reply With Quote
The Following User Says Thank You to HAMIDOU HAMID For This Useful Post:
Old 01-29-2019, 12:15   #9 (permalink)
Freak Poster
 
Join Date: Jun 2011
Posts: 151
Member: 1603029
Status: Offline
Thanks Meter: 18
Same Old Story. Not getting Opened. Tried many times and tried on another Computer but failed. Plz team solve this problem. cm2mt2 2.03 gets open sometimes after trying 15-20 times. But when you need it, it never gets open
  Reply With Quote
Old 01-29-2019, 12:26   #10 (permalink)
No Life Poster
 
Yusuf Lawal's Avatar
 
Join Date: Oct 2011
Location: Nigeria
Posts: 4,434
Member: 1677653
Status: Online
Thanks Meter: 1,605
Donate money to this user
Quote:
Originally Posted by thaquiattari View Post
Same Old Story. Not getting Opened. Tried many times and tried on another Computer but failed. Plz team solve this problem. cm2mt2 2.03 gets open sometimes after trying 15-20 times. But when you need it, it never gets open
Brother, format your PC and install fresh Windows 7 Ultimate 64bit or Windows 10 64bit.

Good luck
  Reply With Quote
The Following User Says Thank You to Yusuf Lawal For This Useful Post:
Old 01-29-2019, 12:54   #11 (permalink)
Freak Poster
 
Join Date: Jun 2008
Location: alex
Posts: 262
Member: 793406
Status: Offline
Sonork: 100.1647095
Thanks Meter: 47
whte abot of all oppo new secorty like tihs


PTFN : MTK USB Port (COM62)
MODE : BOOTROM
PORT : 62
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+ARB
BROM : BOOTROM
MODE : Oppo : F5 | Manual : Enabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6763
EMI : SRC : preloader_oppo6763_17031.bin
EMI : CNT : 000F
EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 0 B ]
EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG | DEV : DH6DMB : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG | DEV : 3H6CMB : RAM : [ 6.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG | DEV : GE6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG | DEV : RD64MB : RAM : [ 4.00 GB ]
EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : MICRON | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...

DA : BOOT 2ND DA FAILED!
ERR : 0xC0070004
ERR : DA_HASH_MISMATCH

Error : Fail to init protocol!
Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!
  Reply With Quote
The Following 2 Users Say Thank You to medo_mshakel For This Useful Post:
Old 01-29-2019, 13:06   #12 (permalink)
Freak Poster
 
Join Date: Jul 2012
Posts: 120
Member: 1789551
Status: Online
Thanks Meter: 33
Redmi 6 & 6A

Hi

Redmi 6 & 6A with CPU MTK and Bootloader locked are suported?
  Reply With Quote
Old 01-29-2019, 14:07   #13 (permalink)
Freak Poster
 
Join Date: Jun 2013
Posts: 300
Member: 1958357
Status: Offline
Thanks Meter: 38
THANKS FOR USEFULL UPDATE.

PLEASE CHECK THIS IN NEXT UPDATE

INFINIX NOTE 5 SYLUS. READ FIRMWARE FAILED


Card found : ,
Infinity-Box Chinese Miracle MediaTek Service Module [ MTK ] v2.04

Load IDBase v123080 Ok!


Operation : Identify [ v2.04 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM10)
MODE : PRELOADER PORT
PORT : 10
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : PRELOADER PORT
MODE : INFINIX : SECURE_BASE | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_SWSEC.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00080000 [ 512.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: 150100525836344D4203494DD83A7461
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 79EFD4909D1DA4F235C8556F63EBD929

DA : USB : HIGH-SPEED

Boot done!


Done!
Elapsed: 00:00:28

Operation : Read Firmware [ v2.04 ]

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MediaTek PreLoader USB VCOM (Android) (COM10)
MODE : PRELOADER PORT
PORT : 10
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000005
BROM : SecMode : SBC+SDA
BROM : PRELOADER PORT
MODE : INFINIX : SECURE_BASE | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_SWSEC.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info

SRAM: 0x00080000 [ 512.00 KB ]
DRAM: 0x100000000 [ 4.00 GB ]

EMMC: 150100525836344D4203494DD83A7461
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : RX64MB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]

CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0000 , EVOL : 0x0000

RNID : 79EFD4909D1DA4F235C8556F63EBD929

DA : USB : HIGH-SPEED

Boot done!


MT6763

Unsupport : 0x0000000012D00000 : 0x0000000004000000 : md1img_a


Error : Device NOT supported for SAVE READ!
Send log and report.log (if exists) to support! Include device info also!

Reconnect Power/Cable!
  Reply With Quote
Old 01-29-2019, 14:36   #14 (permalink)
Freak Poster
 
Join Date: Jan 2015
Location: manshera,Pakistan
Posts: 218
Member: 2330556
Status: Offline
Thanks Meter: 70
what about oppo new security...

1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...

PTFN : MTK USB Port (COM11)
MODE : BOOTROM
PORT : 11
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6763 , SBID : 0x8A00 , HWVR : 0xCA01 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x000000E5
BROM : SecMode : SBC+SDA+SEL
BROM : BOOTROM
MODE : Oppo : F5 | Manual : Disabled
BROM : SLA
BROM : SLA Passed!
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL_CRYPTO.bin
AGENT : Found MT6763
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : BROM
DA : EXT_RAM NOT initialized!
EMI : DEV : MT6763
EMI : SRC : preloader_oppo6763_17031.bin
EMI : CNT : 000F
EMI : [00] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 0 B ]
EMI : [01] : eMCP : eMMC+LP/DDR4 , ID : 150100444836444D42 : VEN : SAMSUNG | DEV : DH6DMB : RAM : [ 4.00 GB ]
EMI : [02] : eMCP : eMMC+LP/DDR3 , ID : 150100525836344D42 : VEN : SAMSUNG | DEV : RX64MB : RAM : [ 4.00 GB ]
EMI : [03] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344142 : VEN : SAMSUNG | DEV : RH64AB : RAM : [ 4.00 GB ]
EMI : [04] : eMCP : eMMC+LP/DDR4 , ID : 150100334836434D42 : VEN : SAMSUNG | DEV : 3H6CMB : RAM : [ 6.00 GB ]
EMI : [05] : eMCP : eMMC+LP/DDR3 , ID : 150100524836344D42 : VEN : SAMSUNG | DEV : RH64MB : RAM : [ 4.00 GB ]
EMI : [06] : eMCP : eMMC+LP/DDR3 , ID : 150100474436424D42 : VEN : SAMSUNG | DEV : GD6BMB : RAM : [ 3.00 GB ]
EMI : [07] : eMCP : eMMC+LP/DDR3 , ID : 150100475836424D42 : VEN : SAMSUNG | DEV : GX6BMB : RAM : [ 3.00 GB ]
EMI : [08] : eMCP : eMMC+LP/DDR3 , ID : 150100474536424D42 : VEN : SAMSUNG | DEV : GE6BMB : RAM : [ 3.00 GB ]
EMI : [09] : eMCP : eMMC+LP/DDR3 , ID : 150100524436344D42 : VEN : SAMSUNG | DEV : RD64MB : RAM : [ 4.00 GB ]
EMI : [0A] : eMCP : eMMC+LP/DDR3 , ID : 13014E53304A394237 : VEN : UNKNOWN | DEV : S0J9B7 : RAM : [ 3.00 GB ]
EMI : [0B] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0C] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 4.00 GB ]
EMI : [0D] : DRAM : EXTERNAL DRAM [LP/DDR3] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 3.00 GB ]
EMI : [0E] : DRAM : EXTERNAL DRAM [LP/DDR4] , UNDEFINED : VEN : UNKNOWN | DEV : : RAM : [ 6.00 GB ]
EMI : Init EMI from PRELOADER
EMI : EXT_RAM CFG Passed!
DA : BOOT to 2nd DA ...

DA : BOOT 2ND DA FAILED!
ERR : 0xC0070004
ERR : DA_HASH_MISMATCH

Error : Fail to init protocol!
Remove battery, cable. Check cable/connection/driver! Check SW hint! Repeat operation!

Reconnect Power/Cable!
  Reply With Quote
Old 01-29-2019, 14:54   #15 (permalink)
No Life Poster
 
A.G.Shahid's Avatar
 
Join Date: Nov 2016
Location: Allah Is One
Posts: 1,507
Member: 2644066
Status: Offline
Thanks Meter: 656


Bundle Of Thanks ................


Br
ShahiD




  Reply With Quote
The Following User Says Thank You to A.G.Shahid For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 22:10.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.21749 seconds with 8 queries

SEO by vBSEO