Infinity Chinese Miracle-2 QLM v1.16 - Lot of new models and features - Page 19 - GSM-Forum

Yusuf Lawal · 06-05-2018, 17:15

Quote:

Originally Posted by umerkhalid1992

yes bro i did same even showing driver too emergency care suite conectivity but not connecting

Bro, but u told me it as been done...

shaikhmobiles · 06-06-2018, 04:36

Oppo A71 2018 not supported....................

sajjad akram · 06-07-2018, 11:20

Mobicel R9 Lite MSM8973 remove frp and read firmware done with infinity cm2...

Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16

Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 425 [MSM8917]
ID_BLOCK_S : 301E4492
ID_BLOCK_E : 00007705
ID_BLOCK_L : 762BA4D088BDD1BE42CDCFCF25C25FA4
ID_BLOCK_L : 74AE502F56F6347CB37FF557EF800026
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG4a2
Boot Ok!

Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:35

Reconnect Power/Cable!

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 425 [MSM8917]
ID_BLOCK_S : 301E4492
ID_BLOCK_E : 00007705
ID_BLOCK_L : 762BA4D088BDD1BE42CDCFCF25C25FA4
ID_BLOCK_L : 74AE502F56F6347CB37FF557EF800026
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG4a2
Boot Ok!

Brand : Mobicel
ProdName : R9_LITE
ProdModel : R9 LITE
Device : R9_LITE
AndroidVer: 7.1.2
Manufact. : R9 LITE
QLMxCPU : MSM8937

DevInfo : MSM8937__R9_LITE__Mobicel__ANDR_v7.1.2__R9_LITE__R 9_LITE__R9_LITE

Reading Flash Content ...
[Read Ok] : gpt_main0.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : sbl1.mbn
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : devcfg.mbn
[Read Ok] : adspso.bin
[Read Ok] : ddr.bin
[Read Ok] : fs_gc.img
[Read Ok] : sec.dat
[Read Ok] : splash.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : persist.img
[Read Ok] : misc.img
[Read Ok] : mdtp.img
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : ap.mbn
[Read Ok] : msap.mbn
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin

Android Info saved!
Read finished!
Configuration : MSM8917 / eMMC
Firmware Size : 4007 MiB

Done!
Elapsed: 00:13:38

Reconnect Power/Cable!

JayDi · 06-07-2018, 11:27

Quote:

Originally Posted by shaikhmobiles

Oppo A71 2018 not supported....................

Signature-Enabled QLM devices support will be in 1.17 or 1.18.

mdronyc · 06-09-2018, 08:53

Redmi Note 5 Pro mi account Remove plz help me

Card found : AE162235 , v0136
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : FFA648A5
ID_BLOCK_S : 413D3AA1
ID_BLOCK_L : 4D575FCFAA437B30ED3519E9AA5286B8
ID_BLOCK_L : 0B90DBAEADCF92D271A17C58C661BDFA
Use CM2 Internal Loader

ERROR : Prepare target failed! Unsupported yet CPU!
INFO : Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

princesaddam · 06-09-2018, 10:02

Quote:

Originally Posted by mdronyc

Redmi Note 5 Pro mi account Remove plz help me

Card found : AE162235 , v0136
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : FFA648A5
ID_BLOCK_S : 413D3AA1
ID_BLOCK_L : 4D575FCFAA437B30ED3519E9AA5286B8
ID_BLOCK_L : 0B90DBAEADCF92D271A17C58C661BDFA
Use CM2 Internal Loader

ERROR : Prepare target failed! Unsupported yet CPU!
INFO : Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

Hello,
For now Download firmware from miui site,, Select firmware and do ur Desire operation

moniuzzaman · 06-12-2018, 18:16

vivo v9 format done by infinity box

Card found : 64C1CE3F , v0137
Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16

Operation : Identify [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : 5461ADC5
ID_BLOCK_L : 6EA99271FC63B0EEAA82EE0CE8D76B38
ID_BLOCK_L : 3A7FF508F80A299AFB7494D5729AAFED
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RH64AB
Boot Ok!

Brand : vivo
ProdName : msm8953_64
ProdModel : vivo 1723
Device : msm8953_64
AndroidVer: 8.1.0
Manufact. : vivo
SysPatch : OPM1.171019.011
DevComTime: 4/14/2018 12:12:31 PM

USERData : ENCRYPTED
GCSec : NORMAL

Done!
Elapsed: 00:00:19

Reconnect Power/Cable!

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : 5461ADC5
ID_BLOCK_L : 6EA99271FC63B0EEAA82EE0CE8D76B38
ID_BLOCK_L : 3A7FF508F80A299AFB7494D5729AAFED
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RH64AB
Boot Ok!

Brand : vivo
ProdName : msm8953_64
ProdModel : vivo 1723
Device : msm8953_64
AndroidVer: 8.1.0
Manufact. : vivo

DevInfo : MSM89xx__vivo__vivo__ANDR_v8.1.0__vivo_1723__msm89 53_64__msm8953_64

ReportFile : C:\InfinityBox\CM2QLM\QLM_16report.log
Send report to mail : [email protected] with title "QFW" !

INFO : Device is not supported yet!
INFO : Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

Operation : Read Flash [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : 5461ADC5
ID_BLOCK_L : 6EA99271FC63B0EEAA82EE0CE8D76B38
ID_BLOCK_L : 3A7FF508F80A299AFB7494D5729AAFED
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RH64AB
Boot Ok!

Brand : vivo
ProdName : msm8953_64
ProdModel : vivo 1723
Device : msm8953_64
AndroidVer: 8.1.0
Manufact. : vivo

DevInfo : MSM89xx__vivo__vivo__ANDR_v8.1.0__vivo_1723__msm89 53_64__msm8953_64

ReportFile : C:\InfinityBox\CM2QLM\QLM_16report.log
Send report to mail : [email protected] with title "QFW" !

INFO : Device is not supported yet!
INFO : Send log and report.log to support! Include device info also!

Reconnect Power/Cable!

Operation : Reset UserLocks [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : 5461ADC5
ID_BLOCK_L : 6EA99271FC63B0EEAA82EE0CE8D76B38
ID_BLOCK_L : 3A7FF508F80A299AFB7494D5729AAFED
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RH64AB
Boot Ok!

ERROR : FS verification fail! Encrypted or damaged!

Reconnect Power/Cable!

Operation : Identify [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : 5461ADC5
ID_BLOCK_L : 6EA99271FC63B0EEAA82EE0CE8D76B38
ID_BLOCK_L : 3A7FF508F80A299AFB7494D5729AAFED
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RH64AB
Boot Ok!

Brand : vivo
ProdName : msm8953_64
ProdModel : vivo 1723
Device : msm8953_64
AndroidVer: 8.1.0
Manufact. : vivo
SysPatch : OPM1.171019.011
DevComTime: 4/14/2018 12:12:31 PM

USERData : ENCRYPTED
GCSec : NORMAL

Done!
Elapsed: 00:00:21

Reconnect Power/Cable!

Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : 5461ADC5
ID_BLOCK_L : 6EA99271FC63B0EEAA82EE0CE8D76B38
ID_BLOCK_L : 3A7FF508F80A299AFB7494D5729AAFED
Use CM2 Internal Loader
Loader Sent! Initializing ...
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ]
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RH64AB
Boot Ok!

Format USER ...
Format CACHE ...
Format Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:23

Reconnect Power/Cable!

princesaddam · 06-14-2018, 12:47

Code:

Operation : Identify [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : CF087F36
ID_BLOCK_L : 1F3EE5006B12237F3BFD7F9F7BA61AA9
ID_BLOCK_L : C1861CF301F1C041409D730C9B714416
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ] 
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RH64AB
Boot Ok!


Brand     : vivo
ProdName  : msm8953_64
ProdModel : vivo 1723
Device    : msm8953_64
AndroidVer: 8.1.0
Manufact. : vivo
SysPatch  : OPM1.171019.011
DevComTime: 05-05-2018 AM 10:10:41

USERData : ENCRYPTED
GCSec    : NORMAL

Done!
Elapsed: 00:00:19

Code:

Operation : Reset Settings [ v1.16 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
ID_BLOCK_I : SnapDragon 625 [MSM8953]
ID_BLOCK_S : CF087F36
ID_BLOCK_L : 1F3EE5006B12237F3BFD7F9F7BA61AA9
ID_BLOCK_L : C1861CF301F1C041409D730C9B714416
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1
MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ] 
ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200
Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RH64AB
Boot Ok!

Format USER ... 
Format CACHE ... 
Format Ok!
Remove FRP
Reset Ok!

Done!
Elapsed: 00:00:26

Reconnect Power/Cable!

service32 · 06-16-2018, 09:47

I have to unlock HTC one M8. How can I do it with this CM2 tool?
I pressed both volume buttons and inserted usb cable but nothing happened.
Further, I don't see unlock button.

Mr.3. · 06-16-2018, 09:52

Quote:

Originally Posted by service32

I have to unlock HTC one M8. How can I do it with this CM2 tool?
I pressed both volume buttons and inserted usb cable but nothing happened.
Further, I don't see unlock button.

Htc Qualcomm phones not supported with QM2

service32 · 06-16-2018, 09:56

Quote:

Originally Posted by Mr.3.

Htc Qualcomm phones not supported with QM2

But it is written that CM2 Qulcomm version 1.16 support Qualcomm MSM8974AB Snapdragon 801. And HTC one M8 has this processor.
I am confuse...

Mr.3. · 06-16-2018, 09:59

Yes bro , but it’s disable qcom download mode ,if cm2 support fastboot mode then you can repair with cm2 ,

service32 · 06-16-2018, 14:32

Quote:

Originally Posted by Mr.3.

Yes bro , but it’s disable qcom download mode ,if cm2 support fastboot mode then you can repair with cm2 ,

In this case become not true that CM2 claims that it support this new model and features for Qualcomm MSM8974AB Snapdragon 801.
Sorry to say that, but I am wonder how many other models are in the same case, and when the information from the first page will become true......?

Mr.3. · 06-16-2018, 15:05

90% Qualcomm phone supported With cm2 other new models will be add soon , but please wait for jaydi reply about this matter

three92 · 06-20-2018, 10:56

this tools can fix essential phone ph-1 full brick ?

06-06-2018, 04:36	#272 (permalink)
shaikhmobiles Freak Poster Join Date: Jul 2007 Location: Pakistan Posts: 156 Member: 551708 Status: Offline Thanks Meter: 39	Oppo A71 2018 not supported....................

06-07-2018, 11:20	#273 (permalink)
sajjad akram Freak Poster Join Date: Apr 2016 Location: South Africa /Pakistan Age: 29 Posts: 482 Member: 2555393 Status: Offline Thanks Meter: 268	Mobicel R9 Lite MSM8973 remove frp and read firmware done with infinity cm2... Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16 Operation : Reset Settings [ v1.16 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_I : SnapDragon 425 [MSM8917] ID_BLOCK_S : 301E4492 ID_BLOCK_E : 00007705 ID_BLOCK_L : 762BA4D088BDD1BE42CDCFCF25C25FA4 ID_BLOCK_L : 74AE502F56F6347CB37FF557EF800026 Use CM2 Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1 MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ] ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200 Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG4a2 Boot Ok! Remove FRP Reset Ok! Done! Elapsed: 00:00:35 Reconnect Power/Cable! Operation : Read Flash [ v1.16 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_I : SnapDragon 425 [MSM8917] ID_BLOCK_S : 301E4492 ID_BLOCK_E : 00007705 ID_BLOCK_L : 762BA4D088BDD1BE42CDCFCF25C25FA4 ID_BLOCK_L : 74AE502F56F6347CB37FF557EF800026 Use CM2 Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8917 , FLASH : eMMC , mVER : 1 MemInfo : 0x0003 / 0x0200 / 0x00000003AB400000 [ eMMC 16 GiB ] ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200 Storage : MFR : 0x90 , VENDOR : HYNIX , NAME : HAG4a2 Boot Ok! Brand : Mobicel ProdName : R9_LITE ProdModel : R9 LITE Device : R9_LITE AndroidVer: 7.1.2 Manufact. : R9 LITE QLMxCPU : MSM8937 DevInfo : MSM8937__R9_LITE__Mobicel__ANDR_v7.1.2__R9_LITE__R 9_LITE__R9_LITE Reading Flash Content ... [Read Ok] : gpt_main0.bin [Read Ok] : NON-HLOS.bin [Read Ok] : sbl1.mbn [Read Ok] : rpm.mbn [Read Ok] : tz.mbn [Read Ok] : devcfg.mbn [Read Ok] : adspso.bin [Read Ok] : ddr.bin [Read Ok] : fs_gc.img [Read Ok] : sec.dat [Read Ok] : splash.img [Read Ok] : emmc_appsboot.mbn [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : system.img [Read Ok] : cache.img [Read Ok] : persist.img [Read Ok] : misc.img [Read Ok] : mdtp.img [Read Ok] : cmnlib.mbn [Read Ok] : cmnlib64.mbn [Read Ok] : keymaster.mbn [Read Ok] : ap.mbn [Read Ok] : msap.mbn [Read Ok] : userdata.img [Read Ok] : gpt_backup0.bin Android Info saved! Read finished! Configuration : MSM8917 / eMMC Firmware Size : 4007 MiB Done! Elapsed: 00:13:38 Reconnect Power/Cable!

06-09-2018, 08:53	#275 (permalink)
mdronyc Insane Poster Join Date: Oct 2016 Posts: 64 Member: 2635591 Status: Offline Thanks Meter: 27	Redmi Note 5 Pro mi account Remove plz help me Card found : AE162235 , v0136 Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16 Operation : Read Flash [ v1.16 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_I : FFA648A5 ID_BLOCK_S : 413D3AA1 ID_BLOCK_L : 4D575FCFAA437B30ED3519E9AA5286B8 ID_BLOCK_L : 0B90DBAEADCF92D271A17C58C661BDFA Use CM2 Internal Loader ERROR : Prepare target failed! Unsupported yet CPU! INFO : Send log and report.log to support! Include device info also! Reconnect Power/Cable!

06-12-2018, 18:16	#277 (permalink)
moniuzzaman Freak Poster Join Date: Dec 2008 Posts: 247 Member: 931121 Status: Offline Thanks Meter: 100	vivo v9 format done by infinity box Card found : 64C1CE3F , v0137 Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.16 Operation : Identify [ v1.16 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_I : SnapDragon 625 [MSM8953] ID_BLOCK_S : 5461ADC5 ID_BLOCK_L : 6EA99271FC63B0EEAA82EE0CE8D76B38 ID_BLOCK_L : 3A7FF508F80A299AFB7494D5729AAFED Use CM2 Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1 MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ] ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200 Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RH64AB Boot Ok! Brand : vivo ProdName : msm8953_64 ProdModel : vivo 1723 Device : msm8953_64 AndroidVer: 8.1.0 Manufact. : vivo SysPatch : OPM1.171019.011 DevComTime: 4/14/2018 12:12:31 PM USERData : ENCRYPTED GCSec : NORMAL Done! Elapsed: 00:00:19 Reconnect Power/Cable! Operation : Read Flash [ v1.16 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_I : SnapDragon 625 [MSM8953] ID_BLOCK_S : 5461ADC5 ID_BLOCK_L : 6EA99271FC63B0EEAA82EE0CE8D76B38 ID_BLOCK_L : 3A7FF508F80A299AFB7494D5729AAFED Use CM2 Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1 MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ] ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200 Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RH64AB Boot Ok! Brand : vivo ProdName : msm8953_64 ProdModel : vivo 1723 Device : msm8953_64 AndroidVer: 8.1.0 Manufact. : vivo DevInfo : MSM89xx__vivo__vivo__ANDR_v8.1.0__vivo_1723__msm89 53_64__msm8953_64 ReportFile : C:\InfinityBox\CM2QLM\QLM_16report.log Send report to mail : [email protected] with title "QFW" ! INFO : Device is not supported yet! INFO : Send log and report.log to support! Include device info also! Reconnect Power/Cable! Operation : Read Flash [ v1.16 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_I : SnapDragon 625 [MSM8953] ID_BLOCK_S : 5461ADC5 ID_BLOCK_L : 6EA99271FC63B0EEAA82EE0CE8D76B38 ID_BLOCK_L : 3A7FF508F80A299AFB7494D5729AAFED Use CM2 Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1 MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ] ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200 Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RH64AB Boot Ok! Brand : vivo ProdName : msm8953_64 ProdModel : vivo 1723 Device : msm8953_64 AndroidVer: 8.1.0 Manufact. : vivo DevInfo : MSM89xx__vivo__vivo__ANDR_v8.1.0__vivo_1723__msm89 53_64__msm8953_64 ReportFile : C:\InfinityBox\CM2QLM\QLM_16report.log Send report to mail : [email protected] with title "QFW" ! INFO : Device is not supported yet! INFO : Send log and report.log to support! Include device info also! Reconnect Power/Cable! Operation : Reset UserLocks [ v1.16 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_I : SnapDragon 625 [MSM8953] ID_BLOCK_S : 5461ADC5 ID_BLOCK_L : 6EA99271FC63B0EEAA82EE0CE8D76B38 ID_BLOCK_L : 3A7FF508F80A299AFB7494D5729AAFED Use CM2 Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1 MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ] ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200 Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RH64AB Boot Ok! ERROR : FS verification fail! Encrypted or damaged! Reconnect Power/Cable! Operation : Identify [ v1.16 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_I : SnapDragon 625 [MSM8953] ID_BLOCK_S : 5461ADC5 ID_BLOCK_L : 6EA99271FC63B0EEAA82EE0CE8D76B38 ID_BLOCK_L : 3A7FF508F80A299AFB7494D5729AAFED Use CM2 Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1 MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ] ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200 Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RH64AB Boot Ok! Brand : vivo ProdName : msm8953_64 ProdModel : vivo 1723 Device : msm8953_64 AndroidVer: 8.1.0 Manufact. : vivo SysPatch : OPM1.171019.011 DevComTime: 4/14/2018 12:12:31 PM USERData : ENCRYPTED GCSec : NORMAL Done! Elapsed: 00:00:21 Reconnect Power/Cable! Operation : Reset Settings [ v1.16 ] 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_I : SnapDragon 625 [MSM8953] ID_BLOCK_S : 5461ADC5 ID_BLOCK_L : 6EA99271FC63B0EEAA82EE0CE8D76B38 ID_BLOCK_L : 3A7FF508F80A299AFB7494D5729AAFED Use CM2 Internal Loader Loader Sent! Initializing ... Running FireHose on BBID : MSM8953 , FLASH : eMMC , mVER : 1 MemInfo : 0x0003 / 0x0200 / 0x0000000E8F800000 [ eMMC 64 GiB ] ExtInfo : 0x0001C000/00100000/00001000/00001000/00000200 Storage : MFR : 0x15 , VENDOR : SAMSUNG , NAME : RH64AB Boot Ok! Format USER ... Format CACHE ... Format Ok! Remove FRP Reset Ok! Done! Elapsed: 00:00:23 Reconnect Power/Cable!

06-16-2018, 09:47	#279 (permalink)
service32 Junior Member Join Date: Aug 2017 Posts: 36 Member: 2748562 Status: Offline Thanks Meter: 11	I have to unlock HTC one M8. How can I do it with this CM2 tool? I pressed both volume buttons and inserted usb cable but nothing happened. Further, I don't see unlock button.

06-16-2018, 09:59	#282 (permalink)
Mr.3. No Life Poster Join Date: Feb 2009 Location: CMB/Ceylon Posts: 8,096 Member: 962029 Status: Offline Sonork: OEM Lock : ON Thanks Meter: 4,127	Yes bro , but it’s disable qcom download mode ,if cm2 support fastboot mode then you can repair with cm2 ,

06-16-2018, 15:05	#284 (permalink)
Mr.3. No Life Poster Join Date: Feb 2009 Location: CMB/Ceylon Posts: 8,096 Member: 962029 Status: Offline Sonork: OEM Lock : ON Thanks Meter: 4,127	90% Qualcomm phone supported With cm2 other new models will be add soon , but please wait for jaydi reply about this matter

06-20-2018, 10:56	#285 (permalink)
three92 Junior Member Join Date: Jun 2018 Posts: 1 Member: 2844499 Status: Offline Thanks Meter: 0	this tools can fix essential phone ph-1 full brick ?