Infinity Chinese Miracle-2 SPD/Spreadtrum v1.25 - SC9832, SPUnlock and more - Page 6 - GSM-Forum

hendry888888 · 04-21-2017, 08:42

dear infinity team where the mtk and qialcom update.longtime no update sir

Baz-Rind · 04-21-2017, 09:20

very nice update but Long Time===========
==========

cranknet · 04-21-2017, 10:18

it came late, Doesn't it?

InfinityHelp · 04-21-2017, 10:32

Quote:

Originally Posted by hendry888888

dear infinity team where the mtk and qialcom update.longtime no update sir

Dear Sir,

Here is thread regarding SPD update. Please next time make your posts in right threads

InfinityHelp · 04-21-2017, 10:32

Quote:

Originally Posted by cranknet

it came late, Doesn't it?

It was completed in time.

JayDi · 04-21-2017, 14:28

Quote:

Originally Posted by Baz-Rind

very nice update but Long Time===========
==========

Quote:

Originally Posted by cranknet

it came late, Doesn't it?

Just tell me guys, what eaxctly you have done to make it out faster? Did anyone provide logs and info's about SPD phones?
Or , maybe, you even have try send any sample?
What you done, instead of stupid coment? Nothing.

tavo_unlock · 04-21-2017, 16:53

help me firmware requered dead after frp reset

Chinese Miracle II [SPD module] v 1.25

Set mode to : SP [SC773x] eMMC [Android 6.x]

Operation : Check/Read Info [ v1.25 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 99 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ...

Model Name : c390_zkd_071
Model Brand : IPRO
Model Device: c390_zkd_071
AndrVersion : 5.1
BaseBand CPU: C390_ZKD_071
CompileDate : 02/06/2016 9:45:45 a. m.
Project Ver : LMY47D release-keys
Model Ext : WAVE 4.0 II

ExtraInfo : HWInfo not exists, normal phone

Elapsed: 00:00:21

Reconnect Power/Cable!

Operation : Format File System / Reset Settings [ v1.25 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 99 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v2.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x000000006A5F7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x : Reset FRP Lock
Reset Ok!

Done!

Elapsed: 00:00:22

Reconnect Power/Cable!

JayDi · 04-21-2017, 19:00

@tavo_unlock, it can't dead. What device state now? Check and charge battery first.

spd3 · 04-21-2017, 20:00

Quote:

Originally Posted by JayDi

@tavo_unlock, it can't dead. What device state now? Check and charge battery first.

repead procces and poer on frp perfect remove thanks infinity team mr jaydi

Vahidpappali · 04-22-2017, 06:32

The no 1 tool for spd

loved it

great update

Jamil69 · 04-22-2017, 11:50

INTEX AQUA AMAZE PLUS, SPD 9832A PATTERN READ NOT DONE... Any solution sir...?

here is log...

Operation : Read PatternLock [ v1.25 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 9 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9832 eMMC LoaderV1 (c) Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

FlashMode Set : Ok!
Reading PatternLock ...
[Info] : UserData is big! Result can be empty!
PatternLock Not Set!

Elapsed: 00:00:38

Reconnect Power/Cable!

JayDi · 04-22-2017, 12:26

Quote:

Originally Posted by Jamil69

INTEX AQUA AMAZE PLUS, SPD 9832A PATTERN READ NOT DONE... Any solution sir...?

here is log...

Operation : Read PatternLock [ v1.25 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 9 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC9832 eMMC LoaderV1 (c) Infinity
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

FlashMode Set : Ok!
Reading PatternLock ...
[Info] : UserData is big! Result can be empty!
PatternLock Not Set!

Elapsed: 00:00:38

Reconnect Power/Cable!

Hello. Because FS is big, result can be empty, as log explain.
Only Factory Reset for now.

Bajwa786 · 04-22-2017, 12:56

Nice update But 8810/6820 cpu needed
i am waiting for this update sir .

hassenmob · 04-22-2017, 14:40

Quote:

Originally Posted by JayDi

If you face such error again - make NVRAM backup first, if you made it already before unlock - send me in PM, will check it.

here nv backup for unlockCX77xx_SPDNV

JayDi · 04-22-2017, 14:42

Strange backup.
Did you make FW read from it?
Also, if possible, need backup from similar-same sample with older version. Something strange with that phone.
If have any link to fw for it - will be good also.

04-21-2017, 08:42	#76 (permalink)
hendry888888 Freak Poster Join Date: Nov 2008 Location: indonesia Age: 38 Posts: 140 Member: 895552 Status: Offline Thanks Meter: 33	dear infinity team where the mtk and qialcom update.longtime no update sir

04-21-2017, 09:20	#77 (permalink)
Baz-Rind Freak Poster Join Date: Dec 2010 Posts: 128 Member: 1478639 Status: Offline Thanks Meter: 21	very nice update but Long Time=========== ==========

04-21-2017, 10:18	#78 (permalink)
cranknet Freak Poster Join Date: Jan 2014 Location: Algeria Posts: 145 Member: 2105719 Status: Offline Thanks Meter: 20	it came late, Doesn't it?

04-21-2017, 16:53	#82 (permalink)
tavo_unlock No Life Poster Join Date: Jul 2008 Location: infinity Posts: 771 Member: 817412 Status: Offline Sonork: 1618066 Thanks Meter: 69	help me firmware requered dead after frp reset Chinese Miracle II [SPD module] v 1.25 Set mode to : SP [SC773x] eMMC [Android 6.x] Operation : Check/Read Info [ v1.25 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 99 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC7731 Crev eMMC Loader v2.0 Sending FLASH FDL FLASH FDL Ready! Boot Ok! FLASH : eMMC Flash , Structure : Ok! Reading extended info ... Model Name : c390_zkd_071 Model Brand : IPRO Model Device: c390_zkd_071 AndrVersion : 5.1 BaseBand CPU: C390_ZKD_071 CompileDate : 02/06/2016 9:45:45 a. m. Project Ver : LMY47D release-keys Model Ext : WAVE 4.0 II ExtraInfo : HWInfo not exists, normal phone Elapsed: 00:00:21 Reconnect Power/Cable! Operation : Format File System / Reset Settings [ v1.25 ] Settings : SmartFormat is On 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 99 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC7731 Crev eMMC Loader v2.0 Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Checking Structure ... Detected eMMC Flash , Structure detect Ok! eMMC phone detected! Will use 'Safe Format' mode! Mount : /data Size : 0x000000006A5F7000 State : 0x0001 Mount : /cache Size : 0x0000000009600000 State : 0x0001 Prepare Ok! Format Ok! Don't touch phone, until it fully bootup to "Welcome Screen"! Android 5.x/6.x : Reset FRP Lock Reset Ok! Done! Elapsed: 00:00:22 Reconnect Power/Cable!

04-21-2017, 19:00	#83 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	@tavo_unlock, it can't dead. What device state now? Check and charge battery first.

04-22-2017, 06:32	#85 (permalink)
Vahidpappali No Life Poster Join Date: Jul 2016 Location: Gods.On.Country Posts: 639 Member: 2602890 Status: Offline Sonork: NOTINSTALLED Thanks Meter: 230	The no 1 tool for spd loved it great update

04-22-2017, 11:50	#86 (permalink)
Jamil69 Freak Poster Join Date: Nov 2014 Location: Ahmedabad, India Age: 34 Posts: 113 Member: 2286149 Status: Offline Thanks Meter: 34	INTEX AQUA AMAZE PLUS, SPD 9832A PATTERN READ NOT DONE... Any solution sir...? here is log... Operation : Read PatternLock [ v1.25 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 9 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC9832 eMMC LoaderV1 (c) Infinity Sending FLASH FDL FLASH FDL Ready! Boot Ok! Checking Structure ... Detected eMMC Flash , Structure detect Ok! FlashMode Set : Ok! Reading PatternLock ... [Info] : UserData is big! Result can be empty! PatternLock Not Set! Elapsed: 00:00:38 Reconnect Power/Cable!

04-22-2017, 12:56	#88 (permalink)
Bajwa786 Freak Poster Join Date: Oct 2015 Location: Pakistan Age: 36 Posts: 132 Member: 2477331 Status: Offline Sonork: 100.1676088 Thanks Meter: 29	Nice update But 8810/6820 cpu needed i am waiting for this update sir .

04-22-2017, 14:42	#90 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Strange backup. Did you make FW read from it? Also, if possible, need backup from similar-same sample with older version. Something strange with that phone. If have any link to fw for it - will be good also.