Infinity Chinese Miracle-2 SPD/UniSoc v2.02 - Android9, Privacy, New models and more - Page 6 - GSM-Forum

bigjef1 · 11-04-2019, 10:04

Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.02

Load IDBase v10107 Ok!

Operation : Identify [ v2.02 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : OPM2.171019.012
Display ID : Hisense_U964_00_S05_20190416
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-01-05
Build Time : 1555406801
Product Model : Hisense U964
Product Brand : Hisense
Product Name : U964
Product Device : HS7731ESP
Product Board : Hisense_U964
Product Manfct : Hisense
Product Info : sp7731e_fs286
Product Board : sp7731e_fs286
Board Platform : sp7731e

Update DataBase ...

Platform Version: MOCORTM_17C_W18.23.4_P20_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.23.4_P20
HW Version: sc7731e_modem
CMP_Time : 02-25-2019 18:03:32

MODEM TAG : MOCORTM_17C_W18.23.4_P20_Debug_FM_BASE_17C_W18.23. 4_P20_sc7731e_modem_pike2_pub

UserData : STATE : PLAIN

Done!
Elapsed: 00:02:05

Operation : Format FS / Reset Settings [ v2.02 ]
Mode : Reset FRP

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Wipe Ok : FRP

Reconnect Power/Cable!

Done!
Elapsed: 00:00:48

u964 SORRY

Velko_Laita · 11-04-2019, 15:10

Quote:

Originally Posted by JayDi

We will check that case. Hope in next update something will follow. Wiko like use own stuff in most cases.

OK. Thank's for the info. If the customer want to wait till then

bigjef1 · 11-05-2019, 08:42

Operation : Identify [ v2.02 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : ZTE : ZTE Blade L130
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : PPR1.180610.011
Display ID : VDC_ZA_L130_V1.1
Ver. CodeName : REL
Ver. Release : 9
Sec. Patch : 2019-02-05
Build Time : 1552614124
Product Model : ZTE Blade L130
Product Brand : ZTE
Product Name : VDC_ZA_P731K30
Product Device : P731K30
Product Manfct : ZTE
Product Info : P731K30
Product Name : VDC_ZA_P731K30
Product Board : sp7731e_1h20
Board Platform : sp7731e

SecInfo :
IMEI[1] : 861486041178541
IMEI[2] : 867400020316620
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SIMLOCK : SignedType

Platform Version: MOCORTM_17C_W18.41.3_P13_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.41.3_P13
HW Version: sc7731e_modem
CMP_Time : 03-04-2019 14:15:17

MODEM TAG : MOCORTM_17C_W18.41.3_P13_Debug_FM_BASE_17C_W18.41. 3_P13_sc7731e_modem_pike2_pub

UserData : STATE : PLAIN

Done!
Elapsed: 00:02:59

Operation : Read NVM [ v2.02 ]
1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : ZTE : ZTE Blade L130
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

NVMng : SecurityInfo
IMEI[1] : 861486041178541
IMEI[2] : 867400020316620
IMEI[3] : 867400020316638
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF
SIMLOCK : SignedType
NVMng : Backup Ok , 0x00066B28

Platform Version: MOCORTM_17C_W18.41.3_P13_Debug
Project Version: pike2_pub
BASE Version: FM_BASE_17C_W18.41.3_P13
HW Version: sc7731e_modem
CMP_Time : 03-04-2019 14:15:17

MODEM TAG : MOCORTM_17C_W18.41.3_P13_Debug_FM_BASE_17C_W18.41. 3_P13_sc7731e_modem_pike2_pub

Reconnect Power/Cable!

Done!
Elapsed: 00:02:00

WAITING FOR NETWORKUNLOCK PLIZ SIR JAYDI AND INFINIT TEAM

Faith M banda · 11-05-2019, 15:47

Sp unlock tab plz!!!!!!!,so that some of us can renew support..

bobohshacks · 11-06-2019, 15:48

Operation : Identify [ v2.00r2 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_SS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : O21019
Display ID : IMO_Q2_Plus_VFUK_3.0_180817
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-07-05
Build Time : 1534316701
Product Model : IMO Q2 Plus
Product Brand : IMO
Product Name : IMO_Q2_Plus_series
Product Device : IMO_Q2_Plus
Product Manfct : revoview
Product Info : sp9832e_1h10_go
Board Platform : sp9832e
Product Board : sp9832e_1h10_32b

SecInfo :
IMEI[1] : 35252XXXXXXXX
IMEI[2] : 86740XXXXXXXX
IMEI[3] : 86740XXXXXXXX
WIFIMAC : FFFFFFFFFFFF
BT_MAC : FFFFFFFFFFFF

UserData : STATE : ENCRYPTION

Done!
Elapsed: 00:01:12

NETWORK UNLOCK PLEASE TEAM

bobohshacks · 11-06-2019, 21:43

IMO Q2 PLUS READ FW ERROR

Operation : Identify[/COLOR] [ v2.02 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
ERROR : Protocol HandShake failed!

Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Identify [ v2.02 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_SS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Device info :
Patch Level : O21019
Display ID : IMO_Q2_Plus_VFUK_3.0_180817
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-07-05
Build Time : 1534316701
Product Model : IMO Q2 Plus
Product Brand : IMO
Product Name : IMO_Q2_Plus_series
Product Device : IMO_Q2_Plus
Product Manfct : revoview
Product Info : sp9832e_1h10_go
Board Platform : sp9832e
Product Board : sp9832e_1h10_32b

UserData : STATE : ENCRYPTION

Done!
Elapsed: 00:01:31

Operation : Read FW [ v2.02 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
ERROR : BOOT ACK not received!

Error : Fail to init protocol!
Check cable, connection and drivers!

Reconnect Power/Cable!

Operation : Read FW [ v2.02 ]

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : IMO : IMO Q2 Plus
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
Boot sent!
Kick FLASH FDL ...
FDL : Control transfered!

Boot Done!

Error : Device NOT INITIALIZED ! Initialize it first via "IDENTIFY" !
Make sure you have made "IDENTIFY" first!

Reconnect Power/Cable!

MinPin · 11-08-2019, 06:27

Quote:

Originally Posted by JayDi

We will check that case. Hope in next update something will follow. Wiko like use own stuff in most cases.

Loaders I have posted for SC9863A. Working for Wiko Y80.

http://forum.gsmhosting.com/vbb/f103...olved-2708775/

kngoya · 11-09-2019, 09:10

the version shows lot of errors on flashing, tested with serveral models, freezes midway can you fix the bug on next release. the previous one was 100% working without any hussles.

skhu75 · 11-09-2019, 09:24

Hie i cant run infinity spd2 v2.02 says i must update dongle manager is too old when i update dongle manager says no updates

narl17 · 11-11-2019, 06:40

It does not open my dongle and it is already updated that I have an updated version

Oyetunde Semiu · 11-11-2019, 15:36

http://forum.gsmhosting.com/vbb/f103.../#post13892054

alicomputers · 11-12-2019, 08:00

Not Working New Setup

kadricom · 11-15-2019, 16:37

Not Working New Setup

kadricom · 11-15-2019, 17:05

plz supporter

what is the problem not open 2.02?????????

kadricom · 11-15-2019, 17:10

Firmware Version: 0138; Registered: 03-Sep-2008; Expired: 28-Oct-2020; Support: Active

mr
can you send me how to add credit/

11-04-2019, 10:04	#76 (permalink)
bigjef1 Registered User Join Date: Mar 2008 Location: @ blacksheep digital Posts: 793 Member: 731353 Status: Offline Thanks Meter: 254	hisense u962 2019 FRP done Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.02 Load IDBase v10107 Ok! Operation : Identify [ v2.02 ] 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : Control transfered! Boot Done! Device info : Patch Level : OPM2.171019.012 Display ID : Hisense_U964_00_S05_20190416 Ver. CodeName : REL Ver. Release : 8.1.0 Sec. Patch : 2019-01-05 Build Time : 1555406801 Product Model : Hisense U964 Product Brand : Hisense Product Name : U964 Product Device : HS7731ESP Product Board : Hisense_U964 Product Manfct : Hisense Product Info : sp7731e_fs286 Product Board : sp7731e_fs286 Board Platform : sp7731e Update DataBase ... Platform Version: MOCORTM_17C_W18.23.4_P20_Debug Project Version: pike2_pub BASE Version: FM_BASE_17C_W18.23.4_P20 HW Version: sc7731e_modem CMP_Time : 02-25-2019 18:03:32 MODEM TAG : MOCORTM_17C_W18.23.4_P20_Debug_FM_BASE_17C_W18.23. 4_P20_sc7731e_modem_pike2_pub UserData : STATE : PLAIN Done! Elapsed: 00:02:05 Operation : Format FS / Reset Settings [ v2.02 ] Mode : Reset FRP 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : Control transfered! Boot Done! Wipe Ok : FRP Reconnect Power/Cable! Done! Elapsed: 00:00:48 u964 SORRY

11-05-2019, 08:42	#78 (permalink)
bigjef1 Registered User Join Date: Mar 2008 Location: @ blacksheep digital Posts: 793 Member: 731353 Status: Offline Thanks Meter: 254	read nv and securit info done ZTE L130 Operation : Identify [ v2.02 ] 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : ZTE : ZTE Blade L130 Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : Control transfered! Boot Done! Device info : Patch Level : PPR1.180610.011 Display ID : VDC_ZA_L130_V1.1 Ver. CodeName : REL Ver. Release : 9 Sec. Patch : 2019-02-05 Build Time : 1552614124 Product Model : ZTE Blade L130 Product Brand : ZTE Product Name : VDC_ZA_P731K30 Product Device : P731K30 Product Manfct : ZTE Product Info : P731K30 Product Name : VDC_ZA_P731K30 Product Board : sp7731e_1h20 Board Platform : sp7731e SecInfo : IMEI[1] : 861486041178541 IMEI[2] : 867400020316620 IMEI[3] : 867400020316638 WIFIMAC : FFFFFFFFFFFF BT_MAC : FFFFFFFFFFFF SIMLOCK : SignedType Platform Version: MOCORTM_17C_W18.41.3_P13_Debug Project Version: pike2_pub BASE Version: FM_BASE_17C_W18.41.3_P13 HW Version: sc7731e_modem CMP_Time : 03-04-2019 14:15:17 MODEM TAG : MOCORTM_17C_W18.41.3_P13_Debug_FM_BASE_17C_W18.41. 3_P13_sc7731e_modem_pike2_pub UserData : STATE : PLAIN Done! Elapsed: 00:02:59 Operation : Read NVM [ v2.02 ] 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : ZTE : ZTE Blade L130 Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : Control transfered! Boot Done! NVMng : SecurityInfo IMEI[1] : 861486041178541 IMEI[2] : 867400020316620 IMEI[3] : 867400020316638 WIFIMAC : FFFFFFFFFFFF BT_MAC : FFFFFFFFFFFF SIMLOCK : SignedType NVMng : Backup Ok , 0x00066B28 Platform Version: MOCORTM_17C_W18.41.3_P13_Debug Project Version: pike2_pub BASE Version: FM_BASE_17C_W18.41.3_P13 HW Version: sc7731e_modem CMP_Time : 03-04-2019 14:15:17 MODEM TAG : MOCORTM_17C_W18.41.3_P13_Debug_FM_BASE_17C_W18.41. 3_P13_sc7731e_modem_pike2_pub Reconnect Power/Cable! Done! Elapsed: 00:02:00 WAITING FOR NETWORKUNLOCK PLIZ SIR JAYDI AND INFINIT TEAM

11-06-2019, 15:48	#80 (permalink)
bobohshacks Freak Poster Join Date: Mar 2017 Location: Zimbabwe Posts: 127 Member: 2692778 Status: Offline Thanks Meter: 49	please team add network unlock for this phone Operation : Identify [ v2.00r2 ] 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_SS Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : Control transfered! Boot Done! Device info : Patch Level : O21019 Display ID : IMO_Q2_Plus_VFUK_3.0_180817 Ver. CodeName : REL Ver. Release : 8.1.0 Sec. Patch : 2018-07-05 Build Time : 1534316701 Product Model : IMO Q2 Plus Product Brand : IMO Product Name : IMO_Q2_Plus_series Product Device : IMO_Q2_Plus Product Manfct : revoview Product Info : sp9832e_1h10_go Board Platform : sp9832e Product Board : sp9832e_1h10_32b SecInfo : IMEI[1] : 35252XXXXXXXX IMEI[2] : 86740XXXXXXXX IMEI[3] : 86740XXXXXXXX WIFIMAC : FFFFFFFFFFFF BT_MAC : FFFFFFFFFFFF UserData : STATE : ENCRYPTION Done! Elapsed: 00:01:12 NETWORK UNLOCK PLEASE TEAM

11-06-2019, 21:43	#81 (permalink)
bobohshacks Freak Poster Join Date: Mar 2017 Location: Zimbabwe Posts: 127 Member: 2692778 Status: Offline Thanks Meter: 49	Imo q2 plus read fw error IMO Q2 PLUS READ FW ERROR Operation : Identify[/COLOR] [ v2.02 ] 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! ERROR : Protocol HandShake failed! Error : Fail to init protocol! Remove battery, cable. Check cable and connection. Repeat operation! Reconnect Power/Cable! Operation : Identify [ v2.02 ] 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : 0_SC9832E_BASE : SC9832E_eMMC_1GB_SS Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : Control transfered! Boot Done! Device info : Patch Level : O21019 Display ID : IMO_Q2_Plus_VFUK_3.0_180817 Ver. CodeName : REL Ver. Release : 8.1.0 Sec. Patch : 2018-07-05 Build Time : 1534316701 Product Model : IMO Q2 Plus Product Brand : IMO Product Name : IMO_Q2_Plus_series Product Device : IMO_Q2_Plus Product Manfct : revoview Product Info : sp9832e_1h10_go Board Platform : sp9832e Product Board : sp9832e_1h10_32b UserData : STATE : ENCRYPTION Done! Elapsed: 00:01:31 Operation : Read FW [ v2.02 ] 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 ERROR : BOOT ACK not received! Error : Fail to init protocol! Check cable, connection and drivers! Reconnect Power/Cable! Operation : Read FW [ v2.02 ] 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : IMO : IMO Q2 Plus Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... Boot sent! Kick FLASH FDL ... FDL : Control transfered! Boot Done! Error : Device NOT INITIALIZED ! Initialize it first via "IDENTIFY" ! Make sure you have made "IDENTIFY" first! Reconnect Power/Cable!

11-05-2019, 15:47	#79 (permalink)
Faith M banda Freak Poster Join Date: Sep 2017 Location: Malawi Posts: 148 Member: 2761624 Status: Offline Thanks Meter: 59	Sp unlock tab plz!!!!!!!,so that some of us can renew support..

11-09-2019, 09:10	#83 (permalink)
kngoya Freak Poster Join Date: Nov 2013 Location: zimbabwe Posts: 241 Member: 2075865 Status: Offline Thanks Meter: 99	the version shows lot of errors on flashing, tested with serveral models, freezes midway can you fix the bug on next release. the previous one was 100% working without any hussles.

11-09-2019, 09:24	#84 (permalink)
skhu75 Junior Member Join Date: Jan 2017 Location: south africa Posts: 7 Member: 2675958 Status: Offline Thanks Meter: 0	Hie i cant run infinity spd2 v2.02 says i must update dongle manager is too old when i update dongle manager says no updates

11-11-2019, 06:40	#85 (permalink)
narl17 Junior Member Join Date: Aug 2015 Posts: 5 Member: 2446513 Status: Offline Thanks Meter: 0	It does not open my dongle and it is already updated that I have an updated version

11-11-2019, 15:36	#86 (permalink)
Oyetunde Semiu No Life Poster Join Date: Feb 2018 Location: Nigeria Posts: 1,460 Member: 2812901 Status: Offline Thanks Meter: 493	http://forum.gsmhosting.com/vbb/f103.../#post13892054

11-12-2019, 08:00	#87 (permalink)
alicomputers Junior Member Join Date: Apr 2008 Location: Rajanpur Punjab,Pakistan Age: 31 Posts: 29 Member: 742628 Status: Offline Thanks Meter: 6	Not Working New Setup

11-15-2019, 16:37	#88 (permalink)
kadricom No Life Poster Join Date: Jun 2007 Location: BULGARIA_SOFIA Posts: 1,438 Member: 526292 Status: Offline Sonork: 100.1597116 Thanks Meter: 444	Not Working New Setup

11-15-2019, 17:05	#89 (permalink)
kadricom No Life Poster Join Date: Jun 2007 Location: BULGARIA_SOFIA Posts: 1,438 Member: 526292 Status: Offline Sonork: 100.1597116 Thanks Meter: 444	plz supporter what is the problem not open 2.02?????????

11-15-2019, 17:10	#90 (permalink)
kadricom No Life Poster Join Date: Jun 2007 Location: BULGARIA_SOFIA Posts: 1,438 Member: 526292 Status: Offline Sonork: 100.1597116 Thanks Meter: 444	Firmware Version: 0138; Registered: 03-Sep-2008; Expired: 28-Oct-2020; Support: Active mr can you send me how to add credit/