Infinity Chinese Miracle-2 SPD/UniSoc v2.02 - Android9, Privacy, New models and more
 

Infinity Chinese Miracle-2 SPD/UniSoc v2.02 - Android9, Privacy, New models and features

As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.

- Core
Protocol updated
Error handling, error explanation and hint module activated
SC9850 and similar devices WRITEFLASH security disable option enabled
> Use for custom / forced / service operation on secure-enabled SC9850 phones (in case of "AC SECURITY" error)

- Android 9 line devices tested and supported for Firmware reading!
- Self-Learning mode for Firmware Reader activated!
That feature allow analyze new and unknown devices "on the fly" and make complete and correct firmware
Just follow the SW instructions if need and you don't need to wait updates for latest devices

- Service
Security - NVM reading feature activated
> Allow read complete device factory calibration data, security items
> Save also modem info for cross-writing NV between different models
Security - NVM writing feature activated
> Allow restore / rewrite device factory calibration data, security items
> Allow use different modes during restore:
> 1. SWAP ( safe mode ) - if security alive SW will try swap security data
> 2. Complete restore ( rebuild mode ) - destroy ALL original security data if it was inside phone
Identify - better structure detection
Identify - BaseBand deep identification
> Allow read complete BaseBand info and read "MODEM TAG"
> Since nowdays there much SAME devices under DIFFERENT names but same by RADIO part - you may use NVM according that TAG
> TAG now saved during NVM read operation, you can use default Windows search bar in Backup folder to seek need TAG
UserData - PrivacyLock read feature activated
> Allow read PRIVACY lock password and details
> Support DIFFERENT models made by OEM "TRANSSION"

- Flasher
Optimized speed ( from 5% to 15% for UniSoc line )
Optimized PAC handling
Optimized older device line support ( SC7731GEA and similar from SPRD )
NVManager updated - Identify, Backup, Security swap, Verification
Activated new option - Re-Sparse.
> Allow prepare big filesystem images before flash. Useful for low-ram devices and adnroid 9 devices
> Use that option, if have face "INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!" error during SYSTEM flashing

- Firmware Reader
Android 9 line support finished, completely tested and confirmead as working
Vendor-specific mode activated. SW will identify "non-standard" devices and make firmware complete and correct now
> FOTA, vendor-specific features and rest stuff has been tested

- Database:
New generic boots included for SC7731C/G
New generic boots included for SC9863
ZTE lines devices included - A5(2019), A7(2019), L130, L8 and some others

- Other
Bug fixes and some changes according users requests

- Known issues :
[1] UniSoc line is SLOW. It is VERY SLOW! It may takes up to 3-4 times more time comparing with old SPRD.
[2] UniSoc devices with ARB active may dbe ead on wrong SW version flashing at Android 9 line.
We are checking that issue and collecting samples. According to users test and reports solution will follow.
[3] Some old devices after FW flashing may gone to "Encryption Unsuccessfull" state, right now - "ResetPhone" button enough.
[4] UniProt option active may lead to FLASHING problems on old SC7715-SC7731 line devices. Disable this option if you have a problem with old SPRD
[5] NAND devices on SC9820, SC7715, SC8830 are not supported yet for FW reading


Password for archive file (if any) is: 12345678

Download link #1
Download link #2


https://www.infinity-box.com/cdn/tg48.png https://www.infinity-box.com/cdn/yt48.png https://www.infinity-box.com/cdn/fb48.png https://www.infinity-box.com/cdn/tw48.png https://www.infinity-box.com/cdn/ios2-48.png https://www.infinity-box.com/cdn/j48.png

How to upload files to support

Infinity-Box 14 years (2005 - 2019) updates and support as nobody else !

Great update infinity 🙂

Thanks infinty Team
Great Update

Good work team
th best sincere N energetic Team....

wowwwww always shocked updates plz now time is qualcome module give us qualcome updates like this thnx in advace keep it up world no1 team in gsm

Where Is Rar File Password ???????

good update
please add SP unlock for android 8 and 9 .
vodafone kicka 4 VE with android 9 inside.
Please Make EMMC Service Tool, For Oppo MI Huawei etc, For Unlock or Flash
plz add SPD8810/6820
https://i.postimg.cc/y6Qzhb8v/K8Fh2lgC.gif

Here is File password

Great Team Great Update Infinity Team Always Rock...!!!!!!

infinity team now not working with time qualcomm update need long time they are not given but now maximum brand on focusing on mtk and qualcomm cpu and infinity team mtk 2.06 is ultimate but in qualcomm they are so behind with their competitor.

qmobile lt360 sp9850 flashing error
Card found :
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.02

Load IDBase v10107 Ok!


Open : SPD_PROG.xml
Reading package ...
Read package finished!

Created by Infinity-Box (c) 2019
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt

Patch Level : OPM2.171019.012
Display ID : QMobileLT360_MP_24_12
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-12-05
Build Time : 1545650564
Product Model : LT360
Product Brand : QMobile
Product Name : LT360
Product Device : LT360
Product Manfct : QMobile
Product Info : LT360
Product Board : sp9850ka_1h10
Board Platform : sp9850ka


Operation : Flash Firmware [ v2.02 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : SlowSparse Fix : True
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9850x_BASE : SC9850_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
ERROR : FLASH FDL NOT started!

Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!

Reconnect Power/Cable

Hi everyone i was trying to backup firmware SC7731E mmc with cm2 sp2 but unfortunately my sp2 option of FW is disabled i did try both new and old versions but the problem is still exist please help me

Another Great Update, Thanks Infinity Team

Post here the picture of the operation to confirm by team.

Infinity Team Has a Book of Worlds Firsts Always
Please Add SPD 8825/6825
Option to Remove Password/Pattern/Format/etc
Mobiles common on market but difficult to remove security lock if adb mode not open

exe not open,, i try to update dongle firmware its says no update available , my dongle activations is ok,

https://i.postimg.cc/yWRtS18T/12.jpg

https://i.postimg.cc/fJhFcG3Q/13.jpg

It looks like your dongle support period is expired.
How to check - https://www.infinity-box.com/doc/?r=17

If support is expired please contact to your seller and renew support - https://www.infinity-box.com/buy/

Another all module working well. Cm2 mtk. Cm2 qlm.cm2 spd. Just spd2 not work.

Sent from my SM-J710F using Tapatalk

good update,but where is mtk & Qlqom update,kindly quickly lanouch mtk secure boot chips update & Qlqom also

CM2 SPD2 Require Your Smart Card Ver Is v0138 .....

Nobody can compete this team..... Always give unique solutions

How to use it? Any Video for more explanation.

New generic boots included for SC7731C/G
New generic boots included for SC9863
ZTE lines devices included - A5(2019), A7(2019), L130, L8 and some others

Hello
Read NV from locked devices upload to sharing servers post here Links.
hope will help team to support it
Only Flashing supported
The rest.....
No Team works in Reverse Mode !!!

Thanks infinty Team
Great Update

That's when the qcom update will be. Then I'll update.
And so nothing new!!! Sorry

Thanks!
 

THANKS @JayDi SIR
THANKS @INFINITY-BOX TEAM

HARD WORK SUCCESS UPDATE
NICE DIWALI GIFT
WISH YOU ALL HAPPY DIWALI

GOOD LUCK!
____________________
WORKING ON MY BRAIN

Please add sp unlock option

Thanks for Another Great Update Infinity Team please add sp unlock option

Thank you for this excellent update but we need new update in cm2 Qlm more than 2 years without updating cm2 lg too long without updating please new mediatek assurances I know everything takes time but you take the lead in this market ...

Always unic solutions and no regret After waiting any release
Thinks

It's a wonderful, splendid and amazing update keep it up.

It's a wonderful Update .
Very Good Work Infinity Team..

its a good update so now we are requesting for qualcomm update with sp lock appear

button plz besause we are suffering for network unlocking long ago

for online remove splock is very expensive. and it,s only for each phone

sir you give us always permanent solutions and we do not hesitate to pay for permanent

solutions because we know what we are paying for. so lets hope it will be soon

Micromax Q440 Hw. Ver5 Still Not Support For Nv,Security,Identify
 

Hello Sir
Micromax q402 Hw-5 still not support for identify,nv and repair security, only flashing support at moment and this handset comes with splock if possible add support for this handset.
image-1
https://i.postimg.cc/Y0NNjVT0/nv-read-error.png
image-2

https://i.postimg.cc/66CfH2TK/nv2.png
File Download

updates and support as nobody else great team keep it up

password is in support area in folder with software.

also first post of thread updated with password.

@galaxycompue
words without proof is nothing. if yyou say something you must at lest post an examples (if any) ottherwise your words are just fake news. Please in future provide proof if you want to say something.

If it's "nothing new" for you I think you are an experienced user with perfect prgramming experience and with your own software solutions. Right ?
You are weclome to contact us to get a job. Waiting for your e-mail !

@jrbravo
I think Infinity supporters already answered your question earlier but if you think it was not enough let me tell you that work about all CPU's is in progress in non-stop mode.
Sure you can post more questions about QLM in thread related to SPD/UniSoc !

What do you mean "not work" ?
Do you see any error message text ?

@Deepesh Sharma

You are mixing Q440 and Q402
the posted firmware is for Q440 (MT6737T)

great please do more on mtk privacy locks

sorry for mistake but on image logs clear its Micromax q402+ mod. of section please edit to Q402+

Hi, It is possible add NVM repair Fix, by selecting it directly from .PAC? I have some devices that have corrupted security...

Best Regards
Shensohau

Good update team.
Add support for SP Unlock in diag or boot mode.
Thanks.