Infinity Chinese Miracle-2 SPD/UniSoc v2.02 - Android9, Privacy, New models and more - GSM-Forum

InfinityHelp · 10-27-2019, 07:48

Infinity Chinese Miracle-2 SPD/UniSoc v2.02 - Android9, Privacy, New models and features

As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.

- Core
Protocol updated
Error handling, error explanation and hint module activated
SC9850 and similar devices WRITEFLASH security disable option enabled
> Use for custom / forced / service operation on secure-enabled SC9850 phones (in case of "AC SECURITY" error)

- Android 9 line devices tested and supported for Firmware reading!
- Self-Learning mode for Firmware Reader activated!
That feature allow analyze new and unknown devices "on the fly" and make complete and correct firmware
Just follow the SW instructions if need and you don't need to wait updates for latest devices

- Service
Security - NVM reading feature activated
> Allow read complete device factory calibration data, security items
> Save also modem info for cross-writing NV between different models
Security - NVM writing feature activated
> Allow restore / rewrite device factory calibration data, security items
> Allow use different modes during restore:
> 1. SWAP ( safe mode ) - if security alive SW will try swap security data
> 2. Complete restore ( rebuild mode ) - destroy ALL original security data if it was inside phone
Identify - better structure detection
Identify - BaseBand deep identification
> Allow read complete BaseBand info and read "MODEM TAG"
> Since nowdays there much SAME devices under DIFFERENT names but same by RADIO part - you may use NVM according that TAG
> TAG now saved during NVM read operation, you can use default Windows search bar in Backup folder to seek need TAG
UserData - PrivacyLock read feature activated
> Allow read PRIVACY lock password and details
> Support DIFFERENT models made by OEM "TRANSSION"

- Flasher
Optimized speed ( from 5% to 15% for UniSoc line )
Optimized PAC handling
Optimized older device line support ( SC7731GEA and similar from SPRD )
NVManager updated - Identify, Backup, Security swap, Verification
Activated new option - Re-Sparse.
> Allow prepare big filesystem images before flash. Useful for low-ram devices and adnroid 9 devices
> Use that option, if have face "INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!" error during SYSTEM flashing

- Firmware Reader
Android 9 line support finished, completely tested and confirmead as working
Vendor-specific mode activated. SW will identify "non-standard" devices and make firmware complete and correct now
> FOTA, vendor-specific features and rest stuff has been tested

- Database:
New generic boots included for SC7731C/G
New generic boots included for SC9863
ZTE lines devices included - A5(2019), A7(2019), L130, L8 and some others

- Other
Bug fixes and some changes according users requests

- Known issues :
[1] UniSoc line is SLOW. It is VERY SLOW! It may takes up to 3-4 times more time comparing with old SPRD.
[2] UniSoc devices with ARB active may dbe ead on wrong SW version flashing at Android 9 line.
We are checking that issue and collecting samples. According to users test and reports solution will follow.
[3] Some old devices after FW flashing may gone to "Encryption Unsuccessfull" state, right now - "ResetPhone" button enough.
[4] UniProt option active may lead to FLASHING problems on old SC7715-SC7731 line devices. Disable this option if you have a problem with old SPRD
[5] NAND devices on SC9820, SC7715, SC8830 are not supported yet for FW reading

Password for archive file (if any) is: 12345678

Download link #1
Download link #2

How to upload files to support

Infinity-Box 14 years (2005 - 2019) updates and support as nobody else !

Gsmafrica24 · 10-27-2019, 08:00

Great update infinity 🙂

awanbrother · 10-27-2019, 08:04

Thanks infinty Team
Great Update

-Mosin- · 10-27-2019, 08:06

Good work team
th best sincere N energetic Team....

umerkhalid1992 · 10-27-2019, 08:12

wowwwww always shocked updates plz now time is qualcome module give us qualcome updates like this thnx in advace keep it up world no1 team in gsm

Khan-jee · 10-27-2019, 08:13

Where Is Rar File Password ???????

haji rahim · 10-27-2019, 08:16

good update
please add SP unlock for android 8 and 9 .
vodafone kicka 4 VE with android 9 inside.
Please Make EMMC Service Tool, For Oppo MI Huawei etc, For Unlock or Flash
plz add SPD8810/6820

Xaker2012 · 10-27-2019, 08:26

http://forum.gsmhosting.com/vbb/f296...error-2715384/

mbiborna · 10-27-2019, 08:31

Quote:

Originally Posted by Khan-jee

Where Is Rar File Password ???????

Here is File password

Code:

12345678

sajidi1984 · 10-27-2019, 08:32

Great Team Great Update Infinity Team Always Rock...!!!!!!

galaxycompue · 10-27-2019, 08:51

infinity team now not working with time qualcomm update need long time they are not given but now maximum brand on focusing on mtk and qualcomm cpu and infinity team mtk 2.06 is ultimate but in qualcomm they are so behind with their competitor.

bherkund · 10-27-2019, 09:20

qmobile lt360 sp9850 flashing error
Card found :
Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.02

Load IDBase v10107 Ok!

Open : SPD_PROG.xml
Reading package ...
Read package finished!

Created by Infinity-Box (c) 2019
Chinese Miracle II : Spreadtrum / UniSoc Service Module
Device Info file : _Android_info.txt

Patch Level : OPM2.171019.012
Display ID : QMobileLT360_MP_24_12
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2018-12-05
Build Time : 1545650564
Product Model : LT360
Product Brand : QMobile
Product Name : LT360
Product Device : LT360
Product Manfct : QMobile
Product Info : LT360
Product Board : sp9850ka_1h10
Board Platform : sp9850ka

Operation : Flash Firmware [ v2.02 ]

Setting : Update NVRAM : False
Setting : Force NVRAM : False
Setting : SlowSparse Fix : True
Setting : Update PMT : True

1. Power off device, wait 10-15 seconds
2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )
3. Insert cable in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
Boot : INF : 0_SC9850x_BASE : SC9850_eMMC_1GB_RS
Sending Init Boot ...
Boot sent!
Kick FDL ...
BootVersion : Spreadtrum Boot Block version 1.1
Protocol setup ...
Port speed : 921600
Sending Flash Boot ...
ERROR : FLASH FDL NOT started!

Error : Fail to boot FDL!
Unsupported device with selected fdl! Change settings!

Reconnect Power/Cable

Alihamza200099 · 10-27-2019, 10:33

Hi everyone i was trying to backup firmware SC7731E mmc with cm2 sp2 but unfortunately my sp2 option of FW is disabled i did try both new and old versions but the problem is still exist please help me

Jastech · 10-27-2019, 11:50

Another Great Update, Thanks Infinity Team

Oyetunde Semiu · 10-27-2019, 11:54

Quote:

Originally Posted by Alihamza200099

Hi everyone i was trying to backup firmware SC7731E mmc with cm2 sp2 but unfortunately my sp2 option of FW is disabled i did try both new and old versions but the problem is still exist please help me

Post here the picture of the operation to confirm by team.

10-27-2019, 07:48	#1 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	Infinity Chinese Miracle-2 SPD/UniSoc v2.02 - Android9, Privacy, New models and more Infinity Chinese Miracle-2 SPD/UniSoc v2.02 - Android9, Privacy, New models and features As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods. - Core Protocol updated Error handling, error explanation and hint module activated SC9850 and similar devices WRITEFLASH security disable option enabled > Use for custom / forced / service operation on secure-enabled SC9850 phones (in case of "AC SECURITY" error) - Android 9 line devices tested and supported for Firmware reading! - Self-Learning mode for Firmware Reader activated! That feature allow analyze new and unknown devices "on the fly" and make complete and correct firmware Just follow the SW instructions if need and you don't need to wait updates for latest devices - Service Security - NVM reading feature activated > Allow read complete device factory calibration data, security items > Save also modem info for cross-writing NV between different models Security - NVM writing feature activated > Allow restore / rewrite device factory calibration data, security items > Allow use different modes during restore: > 1. SWAP ( safe mode ) - if security alive SW will try swap security data > 2. Complete restore ( rebuild mode ) - destroy ALL original security data if it was inside phone Identify - better structure detection Identify - BaseBand deep identification > Allow read complete BaseBand info and read "MODEM TAG" > Since nowdays there much SAME devices under DIFFERENT names but same by RADIO part - you may use NVM according that TAG > TAG now saved during NVM read operation, you can use default Windows search bar in Backup folder to seek need TAG UserData - PrivacyLock read feature activated > Allow read PRIVACY lock password and details > Support DIFFERENT models made by OEM "TRANSSION" - Flasher Optimized speed ( from 5% to 15% for UniSoc line ) Optimized PAC handling Optimized older device line support ( SC7731GEA and similar from SPRD ) NVManager updated - Identify, Backup, Security swap, Verification Activated new option - Re-Sparse. > Allow prepare big filesystem images before flash. Useful for low-ram devices and adnroid 9 devices > Use that option, if have face "INT : WAIT TIMEOUT! DEVICE PROBLEM or WRONG FDL!" error during SYSTEM flashing - Firmware Reader Android 9 line support finished, completely tested and confirmead as working Vendor-specific mode activated. SW will identify "non-standard" devices and make firmware complete and correct now > FOTA, vendor-specific features and rest stuff has been tested - Database: New generic boots included for SC7731C/G New generic boots included for SC9863 ZTE lines devices included - A5(2019), A7(2019), L130, L8 and some others - Other Bug fixes and some changes according users requests - Known issues : [1] UniSoc line is SLOW. It is VERY SLOW! It may takes up to 3-4 times more time comparing with old SPRD. [2] UniSoc devices with ARB active may dbe ead on wrong SW version flashing at Android 9 line. We are checking that issue and collecting samples. According to users test and reports solution will follow. [3] Some old devices after FW flashing may gone to "Encryption Unsuccessfull" state, right now - "ResetPhone" button enough. [4] UniProt option active may lead to FLASHING problems on old SC7715-SC7731 line devices. Disable this option if you have a problem with old SPRD [5] NAND devices on SC9820, SC7715, SC8830 are not supported yet for FW reading Password for archive file (if any) is: 12345678 Download link #1 Download link #2 How to upload files to support Infinity-Box 14 years (2005 - 2019) updates and support as nobody else ! Last edited by InfinityHelp; 10-28-2019 at 09:48. Reason: archive password updated

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-27-2019, 08:00	#2 (permalink)
Gsmafrica24 Junior Member Join Date: May 2019 Location: South Africa Age: 34 Posts: 10 Member: 2908905 Status: Offline Sonork: 1000.560.600 Thanks Meter: 0	Great update infinity 🙂

10-27-2019, 08:04	#3 (permalink)
awanbrother Freak Poster Join Date: Dec 2015 Location: MansehrA KPK (Pakistan) Age: 29 Posts: 267 Member: 2505147 Status: Offline Sonork: [email protected] Thanks Meter: 183	Thanks infinty Team Great Update

10-27-2019, 08:06	#4 (permalink)
-Mosin- No Life Poster Join Date: May 2013 Location: Far From Home..:( Posts: 2,001 Member: 1948608 Status: Offline Thanks Meter: 1,743	Good work team th best sincere N energetic Team....

10-27-2019, 08:12	#5 (permalink)
umerkhalid1992 Freak Poster Join Date: Mar 2017 Location: south africa Posts: 360 Member: 2696842 Status: Offline Sonork: 100.1683002 Thanks Meter: 296	wowwwww always shocked updates plz now time is qualcome module give us qualcome updates like this thnx in advace keep it up world no1 team in gsm

10-27-2019, 08:13	#6 (permalink)
Khan-jee Freak Poster Join Date: Nov 2011 Location: karachi Posts: 295 Member: 1686673 Status: Offline Thanks Meter: 53	Where Is Rar File Password ???????

10-27-2019, 08:16	#7 (permalink)
haji rahim No Life Poster Join Date: Mar 2008 Location: RMS- CLUB Posts: 3,363 Member: 723410 Status: Offline Sonork: 📱 100.1592732 Thanks Meter: 3,374	good update please add SP unlock for android 8 and 9 . vodafone kicka 4 VE with android 9 inside. Please Make EMMC Service Tool, For Oppo MI Huawei etc, For Unlock or Flash plz add SPD8810/6820

10-27-2019, 08:26	#8 (permalink)
Xaker2012 Banned Join Date: May 2013 Location: Hacked by Hackflax on tiktok Posts: 1,548 Member: 1941705 Status: Offline Thanks Meter: 1,248	http://forum.gsmhosting.com/vbb/f296...error-2715384/

10-27-2019, 08:32	#10 (permalink)
sajidi1984 Freak Poster Join Date: Nov 2017 Location: In Your Mind Posts: 399 Member: 2778467 Status: Offline Sonork: only Telegram Thanks Meter: 265	Great Team Great Update Infinity Team Always Rock...!!!!!!

10-27-2019, 08:51	#11 (permalink)
galaxycompue No Life Poster Join Date: Nov 2014 Location: Lucknow Posts: 925 Member: 2298369 Status: Offline Thanks Meter: 440	infinity team now not working with time qualcomm update need long time they are not given but now maximum brand on focusing on mtk and qualcomm cpu and infinity team mtk 2.06 is ultimate but in qualcomm they are so behind with their competitor.

10-27-2019, 09:20	#12 (permalink)
bherkund No Life Poster Join Date: Sep 2009 Location: pakistan Posts: 1,385 Member: 1119917 Status: Offline Sonork: nedi Thanks Meter: 190	qmobile lt360 sp9850 flashing error Card found : Infinity-Box Chinese Miracle II : SPD/USC Module [SP2] v2.02 Load IDBase v10107 Ok! Open : SPD_PROG.xml Reading package ... Read package finished! Created by Infinity-Box (c) 2019 Chinese Miracle II : Spreadtrum / UniSoc Service Module Device Info file : _Android_info.txt Patch Level : OPM2.171019.012 Display ID : QMobileLT360_MP_24_12 Ver. CodeName : REL Ver. Release : 8.1.0 Sec. Patch : 2018-12-05 Build Time : 1545650564 Product Model : LT360 Product Brand : QMobile Product Name : LT360 Product Device : LT360 Product Manfct : QMobile Product Info : LT360 Product Board : sp9850ka_1h10 Board Platform : sp9850ka Operation : Flash Firmware [ v2.02 ] Setting : Update NVRAM : False Setting : Force NVRAM : False Setting : SlowSparse Fix : True Setting : Update PMT : True 1. Power off device, wait 10-15 seconds 2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- ) 3. Insert cable in device! Wait for device ... Device Connected! BootVersion : SPRD3 Boot : INF : 0_SC9850x_BASE : SC9850_eMMC_1GB_RS Sending Init Boot ... Boot sent! Kick FDL ... BootVersion : Spreadtrum Boot Block version 1.1 Protocol setup ... Port speed : 921600 Sending Flash Boot ... ERROR : FLASH FDL NOT started! Error : Fail to boot FDL! Unsupported device with selected fdl! Change settings! Reconnect Power/Cable

10-27-2019, 10:33	#13 (permalink)
Alihamza200099 Insane Poster Join Date: Oct 2019 Location: South africa Posts: 85 Member: 2933993 Status: Offline Thanks Meter: 3	Hi everyone i was trying to backup firmware SC7731E mmc with cm2 sp2 but unfortunately my sp2 option of FW is disabled i did try both new and old versions but the problem is still exist please help me

10-27-2019, 11:50	#14 (permalink)
Jastech Freak Poster Join Date: Jan 2007 Location: Philippines Posts: 167 Member: 436121 Status: Offline Thanks Meter: 40	Another Great Update, Thanks Infinity Team