GSM-Forum - Infinity Chinese Miracle-2 SPD/UniSoc v2.03 - Easy Identify, New models & features

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)

- - Infinity Chinese Miracle-2 SPD/UniSoc v2.03 - Easy Identify, New models & features (https://forum.gsmhosting.com/vbb/f296/infinity-chinese-miracle-2-spd-unisoc-v2-03-easy-identify-new-models-features-2735213/)

Infinity Chinese Miracle-2 SPD/UniSoc v2.03 - Easy Identify, New models & features

Infinity Chinese Miracle-2 SPD/UniSoc v2.03 - Easy Identify, New models & features

As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.

- Core
Protocol updated
Error handling, error explanation and hint module updated

- Service
NVM operations revized
DiagMode option activated ( Platform -> Control -> DiagMode )
> Change SW mode to diag, instead of flash. Do not require BootSelection.
Allow for now:
1. Identify Device - ModemInfo, Build Info, SecurityInfo, SOC Info, DeviceHW Info
2. Format FS / Reset settings ( NOT touch FRP! ) - WIPE mode
3. Read NV data, verify NV
> Don't forget change SW mode between Service/Flash for those operations !

New Identify option - device Platform, Device HW details identification
> Allow detect device SOC family, RAM amount for faster loader selection
> Work in DiagMode, Work ON MODERN and UNISOC chipset only !

- Flasher
Optimized flashing protocol
Optimized older device line support
NVManager updated - Identify, Backup, Security swap
NVManager Recovery tool updated

- Firmware Reader
Optimized structure identification
Activated "forced" reading. Option skip data verification.
> In case of semi-damaged devices, if backup atleast of something required
> In case of "Critical data damaged" errors
Optimized data verification during create FW

- Database:
SC983xx generic loader DB updated
SC9853i generic loader DB updated
SC7731E generic loader DB updated
SC7731x generic loader DB updated
SC9863 loaders DB updated - BQ, Wiko, ZTE, Symphony
SC7731c/g loaders DB updated - various models and RAM size
SC9832E loaders DB updated - Meizu, Wiko
Some other various models with specific hw settings included in loader DB

- Other
Boot Selection mode are indepedent ( loader base can be changed after FW selection, in Platform tab )
Bug fixes and changes according users requests

- Special thanks to respected Mr. gracy_elec

Download link

https://www.infinity-box.com/cdn/tg48.png https://www.infinity-box.com/cdn/yt48.png https://www.infinity-box.com/cdn/fb48.png https://www.infinity-box.com/cdn/tw48.png https://www.infinity-box.com/cdn/ios2-48.png https://www.infinity-box.com/cdn/j48.png

- How to upload files to support

Infinity-Box 14 years (2005 - 2019) updates and support as nobody else !

great update <3
imei repair options will work now???

ur update is now very quick damn our support got expired .lol when we had time not update in 6 months

nice

Allow for now:
1. Identify Device - ModemInfo, Build Info, SecurityInfo, SOC Info, DeviceHW Info
2. Format FS / Reset settings ( NOT touch FRP! ) - WIPE mode
3. Read NV data, verify NV
> Don't forget change SW mode between Service/Flash for those operations !

China keypad phone sc7701b please team add this i am waiting for your replyhttps://uploads.tapatalk-cdn.com/201...5c655ced71.jpg

Sent from my SM-G615F using Tapatalk

Dear support, When miracle xiaomi tool login edition start work ???

iTel A33 W5001p
Identify DIAG mode

Code:

Operation : Identify [ v2.03 ]

BootMode : SVC
 

1. Power off device, wait 10-15 seconds

2. Not hold any key on device ( OLD devices -  1 : VOL+ , 2 : VOL- )

3. Insert cable in device!
 

Wait for device ... 
 

Device Connected!

Enter SVC ... 

Waiting Device ... 

Check SVC ... 

SVC : DiagChannel opened!
 

Boot Done!
 

SOC GEN : UniSoc ( E-family and Modern )

BuildInfo : W5001P-F3102-8.1-OP-V052-20190906

MemoryInfo : EMMC :  16 GB  ;  DRAM : 1 GB
 

ModemInfo :

Platform Version: MOCORTM_17C_W18.31.2_P24_Debug

Project Version:   pike2_pub

BASE  Version:    FM_BASE_17C_W18.31.2_P24

HW Version:        sc7731e_modem

CMP_Time : 07-30-2019 18:17:13
 
 
 

Done!

Elapsed: 00:00:43

Format FS FL Mode

Code:

Operation : Format FS / Reset Settings [ v2.03 ]

Mode : Default [ Reset Settings + FRP ]

BootMode : FLASH
 

1. Power off device, wait 10-15 seconds

2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )

3. Insert cable in device!
 

Wait for device ... 
 

Device Connected!

BootVersion : SPRD3

Boot : INF : 0_SC7731E_BASE : SC7731E_eMMC_1GB_RS

Sending Init Boot ... 

Boot sent!

Kick FDL ... 

BootVersion : Spreadtrum Boot Block version 1.1

Protocol setup ... 

Port speed : 921600

Sending Flash Boot ... 

Boot sent!

Kick FLASH FDL ... 

FDL : Control transfered!
 

Boot Done!
 

Wipe Ok : UserData

Wipe Ok : Cache

Wipe Ok : FRP
 

Reconnect Power/Cable!
 
 

Done!

Elapsed: 00:00:32

Quote:

Originally Posted by kundicom (Post 13912047)

China keypad phone sc7701b please team add this i am waiting for your replyhttps://uploads.tapatalk-cdn.com/201...5c655ced71.jpg

Sent from my SM-G615F using Tapatalk

It will be activated in SCR module. Right now, if you have PAC file you can try do something with it and dump flash.
Since we had no samples for testing, it added just for basic operations.

Quote:

Originally Posted by AM19x (Post 13911980)

great update <3
imei repair options will work now???

We collect now some dumps and info for make that option working for wide-range devices without any problems ( network, baseband and etc. )

Also we are looking for security readouts from fresh sp-locked devices. NVM read must be done over DiagMode!

Quote:

Originally Posted by behruz_abab (Post 13912066)

Dear support, When miracle xiaomi tool login edition start work ???

All Infinity Team services works well and stable (as ordinary).
What problem do you talk about ?

Any SPD devices unsupported??? I mean not Android devices too?

Quote:

Originally Posted by JayDi (Post 13912127)

Not related to Infinity team... wrong forum

Quote:

Originally Posted by behruz_abab (Post 13912066)

Dear support, When miracle xiaomi tool login edition start work ???

not work in my umt .error show update firmwre i m update firmware show already update u r card big problem plz help me.

Quote:

Originally Posted by YellowBoss (Post 13912185)

All Infinity Team services works well and stable (as ordinary).
What problem do you talk about ?

Hello sir small focus for Qualcomm please

Sent from my SM-G615F using Tapatalk

Quote:

Originally Posted by kundicom (Post 13912223)

Hello sir small focus for Qualcomm please

Sent from my SM-G615F using Tapatalk

Hello sir as I can see you are user with good experience so you know that real research need time (not like copy/paste skills of other people, for sure you know names well). Infinity Team works in non-stop mode.

Please in future make your posts in right forum thread. Here is thread about SPD/UniSoc and I hope you know that Qualcomm is something different.
Thank you !