GSM-Forum - Infinity Chinese Miracle-2 SPD/UniSOC v2.05

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)

- - Infinity Chinese Miracle-2 SPD/UniSOC v2.05 - NAND, KaiOs and new features (https://forum.gsmhosting.com/vbb/f296/infinity-chinese-miracle-2-spd-unisoc-v2-05-nand-kaios-new-features-2833217/)

Infinity Chinese Miracle-2 SPD/UniSOC v2.05 - NAND, KaiOs and new features

Infinity Chinese Miracle-2 SPD/UniSOC v2.05 - NAND, KaiOs and new features

As ordinary, unique functions and methods released

Core
NewChip : SC7731E with NAND ( KaiOS and MocorDroid5 )
NewChip : SC7715x with NAND ( KaiOS , MocorDroid5 , Android 4x)
NewChip : SC9820x with NAND ( MocorDroid5 , Android 4x)
Protocol : Speed increased for most operations ( SPD and UniSOC )
Protocol : Protocol changes according SPD/UniSOC R23 line

New Feature : NAND support ( SPD and UniSOC generation )
!* Support flashing Factory / InfinityFW
!* Support correct flash selection and servicing phones with NAND
!* Support InfinityFW reading ( Complete, Factory-Like )
!* Support Service operations

Service
Changed : Repair security procedure updated (Flash and Diag mode)
Changed : Identify procedure updated
!* Support complete and fast NAND devices identification
!* Support complete simlock info structure identify and verify
!* Support multi-nv structure detection and security info detection
!* Database update / self-learning updated
!* FileSystem identification support UBIFS and F2FS detection
Changed : Format FS / Reset FRP procedure updated

Firmware Reader
New Feature : NAND support
!* Support old and new generations ( SPD and UniSOC )
!* Support plain Android , KaiOs and MocorDroid5 OS
!* Automatic and correct FileSystem creation for NAND devices
!* Support all security types, include UniSoc secure/signed
!* Produced FW is 100% like factory one
Changed : FileSystem creation engine updated ( UBIFS support , bugfixes )
Changed : Improved structure identification
Changed : Support more different types
Changed : Old SPD line support rebuild ( SC7715,SC7731,SC983x,SC9820x )
Changed : Fixed FW creation in full manual / skip verify mode settings

Flasher
New Feature : Complete flash erase ( whole flash format ) during flashing ( eMMC / NAND )
New Feature : Correct NAND flashing support ( SPD and UniSOC ) ( Factory PAC and InfinityFW )
Changed : Flashing core for InfinityFW more stable

Loader Database
NewChip : SC7715 BASE NAND revisions included
NewChip : SC9820 BASE NAND revisions included
NewChip : SC7731E BASE NAND revisions included
NewChip : SC7731E BASE eMMC LOW_MEM revisions included ( cheap A8-A9 devices )
NewChip : SC7731x BASE eMMC LOW_MEM revisions included ( old A4-A5 GEA devices )

Other
Changed : Manual mode : automatic structure and setting detection in manual mode
Changed : Automatic base settings selection for BASE loaders ( Protocol, Charging, FlashSettings )
Changed : Separate NAND mode option activated in platform settings for manual mode
BugFix : Lot of minor changes and bugfixes
Changed : Software compatibility with other applications improved

Download link #1

Download link #2

Download link #3

Information about Infinity products support period renew due to situation with COVID-19

https://www.infinity-box.com/cdn/tg48.png https://www.infinity-box.com/cdn/yt48.png https://www.infinity-box.com/cdn/fb48.png https://www.infinity-box.com/cdn/tw48.png https://www.infinity-box.com/cdn/ios2-48.png https://www.infinity-box.com/cdn/j48.png

- How to upload files to support

Infinity-Box 15 years (since year 2005) updates and support as nobody else !

File password pleaz 123456789 not working

nice update

Loader Database
NewChip : SC7715 BASE NAND revisions included
NewChip : SC9820 BASE NAND revisions included
NewChip : SC7731E BASE NAND revisions included
NewChip : SC7731E BASE eMMC LOW_MEM revisions included ( cheap A8-A9 devices )
NewChip : SC7731x BASE eMMC LOW_MEM revisions included ( old A4-A5 GEA devices )

Boom Boom update thnx team

Quote:

Originally Posted by CHAUDHRAY ARSHAD (Post 14081393)

File password pleaz 123456789 not working

password 12345678

Great team great update..
Best spd in the world..

Quote:

Originally Posted by CHAUDHRAY ARSHAD (Post 14081393)

File password pleaz 123456789 not working

Password is 12345678

When to upgrade quallcom?

MocorDroid5 on SC7715 with NAND test :

Code:

Operation : Identify [ v2.05 ]

BootMode : FLASH
 

1. Power off device, wait 10-15 seconds

2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )

3. Insert cable in device!
 

Wait for device ... 
 

Device Connected!

BootVersion : SPRD3

Boot : INF : 0_SC7715x_BASE : SC7715G_NAND_256MB_NS

Sending Init Boot ... 

Boot sent!

Kick FDL ... 

BootVersion : Spreadtrum Boot Block version 1.1

Protocol setup ... 

Port speed : 921600

Sending Flash Boot ... 

Boot sent!

Kick FLASH FDL ... 

FDL : Control transfered!
 

Boot Done!
 

Device info : 

Patch Level    : MocorDroid

Display ID     : BQ_F9281B_2800G_V02_20191205

Ver. Incmt     : FS330_QVGA_V100_20191205_141535

Ver. CodeName  : REL

Ver. Release   : 4.4.2

Build Time     : 1575526568

Product Model  : BQ-2800G

Product Brand  : BQ-2800G

Product Name   : scx15_sp7715ga_FS330_project

Product Device : scx15_sp7715ga_FS330

Product Board  : scx15_sp7715ga_FS330

Product Manfct : BQ-2800G

Board Platform : scx15

Product Info   : scx15_sp7715ga_FS330
 

FlashInfo : 256k / 4k
 

NVMng  : SecurityInfo 

IMEI[1] : 3xxxxxxxxxxxxxx3

IMEI[2] : 3xxxxxxxxxxxxxx3

IMEI[3] : 3xxxxxxxxxxxxxx3

WIFIMAC : FFFFFFFFFFFF

BT_MAC  : FFFFFFFFFFFF

SEC : SLS:1, SKS:0, SKV:0
 

Platform Version: MOCORTM_W17.46.5_P2_Debug

Project Version:   sc7715_modem

BASE  Version:    TM_BASE_W17.46.5_P2

MMI Version:       sc7715_modem

HW Version:        sc7715_sc7715_modem

CMP_Time : 12-13-2018 16:13:00
 

MODEM TAG : MOCORTM_W17.46.5_P2_Debug_TM_BASE_W17.46.5_P2_sc7715_sc7715_modem_sc7715_modem_sc7715_modem
 

UserData : STATE : PLAIN [UBIFS]
 
 

Done!

Elapsed: 00:01:32

Code:

Operation : Read FW [ v2.05 ]
 

1. Power off device, wait 10-15 seconds

2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )

3. Insert cable in device!
 

Wait for device ... 
 

Device Connected!

BootVersion : SPRD3

Boot : INF : 0_SC7715x_BASE : SC7715G_NAND_256MB_NS

Sending Init Boot ... 

Boot sent!

Kick FDL ... 

BootVersion : Spreadtrum Boot Block version 1.1

Protocol setup ... 

Port speed : 921600

Sending Flash Boot ... 

Boot sent!

Kick FLASH FDL ... 

FDL : Control transfered!
 

Boot Done!
 

Device info : 

Patch Level    : MocorDroid

Display ID     : BQ_F9281B_2800G_V02_20191205

Ver. Incmt     : FS330_QVGA_V100_20191205_141535

Ver. CodeName  : REL

Ver. Release   : 4.4.2

Build Time     : 1575526568

Product Model  : BQ-2800G

Product Brand  : BQ-2800G

Product Name   : scx15_sp7715ga_FS330_project

Product Device : scx15_sp7715ga_FS330

Product Board  : scx15_sp7715ga_FS330

Product Manfct : BQ-2800G

Board Platform : scx15

Product Info   : scx15_sp7715ga_FS330
 

AndroidVer : 4

VlnrLevel : 0x01

FlashInfo : 256k / 4k
 

SCX15__BQ-2800G__BQ-2800G__4.4.2__BQ_F9281B_2800G_V02_20191205__MocorDroid__scx15_sp7715ga_FS330
 

Read : prodnv.img

Read : phase.cfg

Read : wnvitem.bin

Read : wcnnvitem.bin

Read : wmodem.bin

Read : wdsp.bin

Read : modem_wcn.img

Read : boot_logo.bmp

Read : fastboot_logo.bmp

Read : boot.img

Read : system.img

Make : cache.img

Read : recovery.img

Make : userdata.img

Read : u-boot.bin

Read : u-boot-spl-16k.bin
 

Firmware size : 0x127B4F84 ( 295,71 MiB )

Android Info saved : _Android_info.txt

Reconnect Power/Cable!
 
 

Done!

Elapsed: 00:05:09

Code:

Open : SPD_PROG.xml

Reading package ... 

Read package finished!
 

Created by Infinity-Box (c) 2020

Chinese Miracle II : Spreadtrum / UniSoc Service Module

Device Info file   : _Android_info.txt
 

Patch Level    : MocorDroid

Display ID     : BQ_F9281B_2800G_V02_20191205

Ver. Incmt     : FS330_QVGA_V100_20191205_141535

Ver. CodeName  : REL

Ver. Release   : 4.4.2

Build Time     : 1575526568

Product Model  : BQ-2800G

Product Brand  : BQ-2800G

Product Name   : scx15_sp7715ga_FS330_project

Product Device : scx15_sp7715ga_FS330

Product Board  : scx15_sp7715ga_FS330

Product Manfct : BQ-2800G

Board Platform : scx15

Product Info   : scx15_sp7715ga_FS330
 
 

Operation : Flash Firmware [ v2.05 ]
 

Setting   : Update NVRAM : True

Setting   : Force NVRAM : False

Setting   : Update PMT   : True
 

1. Power off device, wait 10-15 seconds

2. Press and hold BooKey ( 1 : BOTH VOL , 2 : VOL+ , 3 : VOL- )

3. Insert cable in device!
 

Wait for device ... 
 

Device Connected!

BootVersion : SPRD3

Boot : INF : INFINITY FW PACKAGE

Sending Init Boot ... 

Boot sent!

Kick FDL ... 

BootVersion : Spreadtrum Boot Block version 1.1

Protocol setup ... 

Port speed : 921600

Sending Flash Boot ... 

Boot sent!

Kick FLASH FDL ... 

FDL : Control transfered!
 

Boot Done!
 

PMTMng : Load PMT

PMTMng : 0x15

PMTMng : Update PMT Ok!
 

NVRM  : wnvitem.bin

NVMng  : Load 0x30

NVMng  : Init SRC

NVMng  : SecurityInfo 

IMEI[1] : 3xxxxxxxxxxxxxx3

IMEI[2] : 3xxxxxxxxxxxxxx3

IMEI[3] : 3xxxxxxxxxxxxxx3

WIFIMAC : FFFFFFFFFFFF

BT_MAC  : FFFFFFFFFFFF

SEC : SLS:1, SKS:0, SKV:0
 

NVMng  : Backup Ok , 0x000283BC

NVMng  : Init DST

NVMng  : Rx0D : Wx0C

NVMng  : NVM block updated!
 

NVRM  : wcnnvitem.bin

NVMng  : Load 0x30

NVMng  : Init SRC

NVMng  : SecurityInfo 

IMEI[1] : 3xxxxxxxxxxxxxx3

IMEI[2] : 3xxxxxxxxxxxxxx3

IMEI[3] : 3xxxxxxxxxxxxxx3

WIFIMAC : FFFFFFFFFFFF

BT_MAC  : FFFFFFFFFFFF

SEC : SLS:1, SKS:0, SKV:0
 

NVMng  : Backup Ok , 0x00009BC8

NVMng  : Init DST

NVMng  : Rx09 : Wx08

NVMng  : NVM block updated!
 

FSIMG  : prodnv.img

CODE  : wmodem.bin

CODE  : wdsp.bin

CODE  : modem_wcn.img

CODE  : boot_logo.bmp

CODE  : fastboot_logo.bmp

CODE  : boot.img

FSIMG  : system.img

FSIMG  : cache.img

CODE  : recovery.img

FSIMG  : userdata.img

UBOOT  : u-boot.bin

UBOOT  : u-boot-spl-16k.bin

ERASE : WFLASH

ERASE : WCNFLASH

ERASE : MISC

Flashing finished!

Reconnect Power/Cable!
 
 

Done!

Elapsed: 00:02:05

Quote:

Originally Posted by CHAUDHRAY ARSHAD (Post 14081393)

File password pleaz 123456789 not working

Yes, you are right !
"123456789 not working" because password is 12345678

Quote:

Originally Posted by BootYa (Post 14081469)

When to upgrade quallcom?

Friend !

this thread is about SPD/UniSoc. Please in future check thread name before ask questions.
Anyway let me inform you that work about other updates and improvements is in progress, you will see an announce when it will be finished

I am always excited when infinity product update come , always exciting update , one of the best team in gsm market.

Good Update Team, keep it Up!

Can we unlock ZTE blande L130 nos??

Quote:

Originally Posted by Khadaff_papillo (Post 14081534)

Can we unlock ZTE blande L130 nos??

Hi,
It's hard to say anything without phone.
You can try to connect phone and see results.