Infinity Chinese Miracle-2 SPD v1.03 - Android Dream #2: SC8830, safe eMMC Format etc

[YellowBoss]

Infinity Chinese Miracle-2 SPD v1.03 - Android Dream #2: SC8830, safe eMMC Format etc.


- New CPU Supported:
Spreadtrum SC8830 with NAND - WorldFirst !
Spreadtrum SC8830 with eMMC - WorldFirst !

Spreadtrum SC8830 with eMMC - WorldFirst !
Supported operations:
- Repair Security: IMEI/IMEI1/IMEI2/IMEI3, BT MAC
- Read Full Phone Info/Identify: eMMC phones on SC8830
- Format FS - Safe and Fast: eMMC on SC8830
- Read PatternLock: eMMC phones on SC8830
No Root/USB debug required
- Firmware flashing: PAC format files on SC8830
- Read/Write NV

Spreadtrum SC8830 with NAND - WorldFirst !
Supported operations:
- Repair Security: IMEI/IMEI1/IMEI2/IMEI3, BT MAC
- Read Phone Info/Identify: NAND phones on SC8830
- Format FS - Safe and Fast: NAND on SC8830
- Read PatternLock: eMMC phones on SC8830
No Root/USB debug required !
- Firmware flashing: PAC format files on SC8830
- Read/Write NV

Spreadtrum SC7715/SC7730/SC7731/SC8830/SC5735 General:
- Format FS / Reset Settings for eMMC phones activated - WorldFirst !
Absolutely Safe and Fast !
Supported all eMMC CPUs: SC7715,SC7730,SC7731,SC8830,SC5735
- Repair Security operation improved for all supported CPUs
- PatternLock reading revised and improved
- Read/Write NV completely revised and improved
TDMA(CN) type supported (SC8xxx Series), Autodetect
Improved Post-operations

Spreadtrum SP Other:
- Initial support for SC6815 and SC8815 (NAND/eMMC)

Spreadtrum FP :
- Samsung B313e support for Flash/Service/Repair/Unlock/Forensic

Other:
FlashID database updated
FlashLoaders updated
Some bugfixes for SAMSUNG SC65xx phones
Some bugfixes for SC66x0 phones
Some bugfixes at all

Info: Check manual inside CM2SPD module folder for more info about SC77xx/SC88xx series connect/flashing/servicing



Official download link



Infinity-Box 10 (ten) years (2005 - 2015) non-stop regular updates and support as nobody else: Infinity-Box - News

New features, Unlock Codes (Huawei, Motorola, Samsung etc.), iPhone Unlock, Software Activations released for Infinity-Box Online Service

- World biggest flash files database for several thousands brands/models
- Infinity-Box Dongle ready for delivery

- Follow us on Twitter
- Facebook

[JayDi]

SC7715 , eMMC : http://forum.gsmhosting.com/vbb/f296...-03-a-1975007/

SC7731 , MMX Q324 , eMMC :

Operation : Format File System [ v1.03 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 32 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/SC7731 loader eMMC v1.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size  : 0x000000005DBFB000
State : 0x0001

Mount : /cache
Size  : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Done!

Elapsed: 00:00:16

Reconnect Power/Cable!

SC5735 , eMMC :

Operation : Format File System [ v1.03 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 32 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC5735 Generic eMMC Loader v1.0  
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size  : 0x00000001A3CFB000
State : 0x0001

Mount : /cache
Size  : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Done!

Elapsed: 00:00:13

Reconnect Power/Cable!

[MyGSM World]

Karbonn Titanium S202 "DAZZLE 2" Read Info / PatternLock / Format Done

{*-*-*-*-*-*-*-Like Dream Become True-*-*-*-*-*-*-*}




Operation : Check/Read Info [ v1.03 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 241 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3 Ój$Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/SC7731 loader eMMC v1.0    § üSending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ... 
Model Name  : scx35_sp7731geaplus_hd_dt
Model Brand : Karbonn
Model Device: scx35_sp7731gea_hd
AndrVersion : 4.4.2
BaseBand CPU: SP7731GEA_HD
CompileDate : 1429935153
Project Ver : Karbonn_TitaniumS202_V0009_20150417
Model Ext   : Titanium S202

Elapsed: 00:00:21

Reconnect Power/Cable!

Operation : Read PatternLock [ v1.03 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 241 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3    oSync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/SC7731 loader eMMC v1.0         Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!

Reading PatternLock ... 
Read Ok , decrypt
PatternLock Sequence : 426813975

Done!

Elapsed: 00:00:27

Reconnect Power/Cable!

Operation : Format File System [ v1.03 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 241 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3     Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/SC7731 loader eMMC v1.0       ' Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size  : 0x000000005DBFB000
State : 0x0001

Mount : /cache
Size  : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Done!

Elapsed: 00:00:28

Reconnect Power/Cable!

[MyGSM World]

Karbonn Titanium S11 Read Info / Format / Read NV Done.



Operation : Check/Read Info [ v1.03 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 241 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/SC7731 loader eMMC v1.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FLASH : eMMC Flash , Structure : Ok!

Reading extended info ... 
Model Name  : v125_fng_051
Model Brand : Karbonn_Titanium_S11
Model Device: v125_fng_051
AndrVersion : 4.4.2
BaseBand CPU: V125_FNG_051
CompileDate : 1423473757
Project Ver : KOT49H 14B_test-keys
Model Ext   : Karbonn_Titanium_S11

Elapsed: 00:00:23

Reconnect Power/Cable!

Operation : Format File System [ v1.03 ]

Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 241 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/SC7731 loader eMMC v1.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ... 
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size  : 0x000000004D7FB000
State : 0x0001

Mount : /cache
Size  : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Done!

Elapsed: 00:00:39

Reconnect Power/Cable!

Operation : Read NV [ v1.03 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

 ====  Wait for phone...

Phone found! [ 241 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7730/SC7731 loader eMMC v1.0   
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Read NVM Part #1
Part Ok
Read NVM Part #2
Part Ok
Saved to : C:\InfinityBox\CM2SPD\phdata\backup\CX_SPDNV.spdnv

Elapsed: 00:00:41

Reconnect Power/Cable!

[vishnudatt]

Real fast updatate with real solution

[dilip_is]

Hey team you are working very nice.

But please put some effort on older android cpu too please.

[galaxycompue]

infinity team plz change ur activation policy and plz give any scheme for one time activation, we are waiting for this news since now a days market position is poor, 50 rs per set for pattern lock so plz give one time activation for chinese module.

[tejas243404]

Originally Posted by ernie78™

hope u add sc8810/6820 im waiting for full support

br

Originally Posted by asmodi

Yes we need sc8810/6820 ...

Originally Posted by rahihimkhan

Thisisa not good update

where the sc8810/6820 support????????????////

Originally Posted by rahihimkhan

This is a not good update

where the sc8810/6820 support????????????////

Originally Posted by djstich

yes it is time this update sc8810/6820 We need support team


Greetings!
djstich

Originally Posted by haji rahim

add sc8810/6820 im waiting for full support too

Originally Posted by mrrobin

where the sc8810/6820/8825 support .Long time waiting nothing about that don't think about user

99% post to need 6820 and 8810 cpu update need me other world first update not need infinity team

[mobile mk]

Great update also add same old cpu like 6820 8810 read write n safe format hope team solve this upcoming update

[PASSIONATE_BOYS]

Hello,
SC6810/8810 will be added, first priorty of team is to add latest running cpu's first. Now no new phones coming in market with SC6810/8810, so team is first adding latest CPU's.

Br.

[PASSIONATE_BOYS]

Originally Posted by hitech care

Update Is Useless Until Read Write Not Supported...Some Rare China Brand File Not Available Easily If Someone Format On Other Box U Need File To Repair....

Hope U Add Soon For 8830 7730 7731 7715 77XX 5735 Read & Write Flash...Update Is Incomplete Without Read Write...

Hello,
Do you still think "Useless" with world's first support? If you think useless don't use it, no one forcing you to use it. Format is totally safe with CM2SPD without any risk. If you are using other tool then definitely it's up to you to take risk.
About read and write team is already working on it. With spd it's not easy to add read/write feature, but still we are working on it. Spd sp support has just begin, so just wait and watch what we have for users.

Br.

[hitech care]

Originally Posted by PASSIONATE_BOYS

Hello,
Do you still think "Useless" with world's first support? If you think useless don't use it, no one forcing you to use it. Format is totally safe with CM2SPD without any risk. If you are using other tool then definitely it's up to you to take risk.
About read and write team is already working on it. With spd it's not easy to add read/write feature, but still we are working on it. Spd sp support has just begin, so just wait and watch what we have for users.

Br.

Hello My Frnd ..Most Of Work Came To Me From Market After Try UR Update Will Not Able TO Repair Handset Which Damage By Other Tool...Second If A Am Having Pac File For Branded Handset I Can Easily Make Reset File Which Is Also Risk Free Without Read Write Update Incomplete...For Security Repair Free Factory Tool Is Also There.... As I Need To Take Backup For Rare Phone Which Is Ok...For Future Use..
Every Team Give Update On MTK Read Write & All But No One Give SPD Update Only Support Fac. File Writing (.Pac) ....
I Am Having All Market Leader Running Boxes Lile Cm2 Avator Volcano Miracle So I Use A Single Box All The Time But Real Test Is When Some Handset Fail On It & I Try With Other If Success With Other Then I Consider As Good Box ..

[PASSIONATE_BOYS]

Originally Posted by hitech care

Hello My Frnd ..Most Of Work Came To Me From Market After Try UR Update Will Not Able TO Repair Handset Which Damage By Other Tool...Second If A Am Having Pac File For Branded Handset I Can Easily Make Reset File Which Is Also Risk Free Without Read Write Update Incomplete...For Security Repair Free Factory Tool Is Also There.... As I Need To Take Backup For Rare Phone Which Is Ok...For Future Use..
Every Team Give Update On MTK Read Write & All But No One Give SPD Update Only Support Fac. File Writing (.Pac) ....
I Am Having All Market Leader Running Boxes Lile Cm2 Avator Volcano Miracle So I Use A Single Box All The Time But Real Test Is When Some Handset Fail On It & I Try With Other If Success With Other Then I Consider As Good Box ..

Hello,
We have many test reports where other devices failed but CM2 revived/repaired it successfully. If system file is damaged only original factory file can repair it in case of spd sp. For spd feature phone it's possible to repair phones killed by other tool- http://forum.gsmhosting.com/vbb/f296...m2spd-1907802/
Again Iam telling you We are working on read firmware for spd sp, when it will be ready team will release it without any delay.
Everyone know about Infinity team, all versions are release only after full testing and working as should be.

Br.

[PASSIONATE_BOYS]

Originally Posted by rahihimkhan

If infinity team not release spd 6820..8810 support

please tell me?

Hello,
Read this- http://forum.gsmhosting.com/vbb/f296...l#post11199248

Br.

[NKhan_Gsm]

Originally Posted by PASSIONATE_BOYS

Hello,
SC6810/8810 will be added, first priorty of team is to add latest running cpu's first. Now no new phones coming in market with SC6810/8810, so team is first adding latest CPU's.

Br.

Thanks sir but as you know nowadays SC6810/8810 CPU phones are alot in Market so your should adjust its priority according market demand we know that world firsts have good advertisement for team but you should pay attention to both Old CPUs which are running in Market and new CPUs.



WBR