Infinity Chinese Miracle II SCR/SPD-RDA v1.03: New models and features - Page 10 - GSM-Forum

BAWAKE ADDAE · 10-04-2018, 21:54

cm2 box price. i am in Ghana , my contact is +233549880481 is both whatsapp and telegram

Yusuf Lawal · 10-04-2018, 22:04

Quote:

Originally Posted by BAWAKE ADDAE

cm2 box price. i am in Ghana , my contact is +233549880481 is both whatsapp and telegram

https://gsmserver.com/item/boxes-and...ty-box-dongle/

immarth · 11-20-2018, 20:42

HELP NEED TO REVIVE DEAD PHONE
READ DUMP FILE AND FLASH TO REMOVE USER LOCK NOW PHONE DEAD

Operation : Write Flash [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Spreadtrum Boot Block version 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

BIN : Format UserData
BIN : Format UserData Ok!

Error : Flashing failed!
Remove battery, cable. Check cable and connection. Repeat operation!

PLEASE HOW CAN I REVIVE THIS PHONE

CS0_MEM : SPI : [FIDELIX] : FM25Q128 : 0x01000000 [ 16MiB ]

Mbonge · 11-25-2018, 10:56

[QUOTE=YellowBoss;13175445]Infinity Chinese Miracle II SCR/SPD-RDA v1.03: New models and features

Supported CPU list:
Spreadtrum: SC6530, SC6531, SC6531(A/C), SC6531E, SC6533, SC6533G
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826

RDA Mirco RDA8851 rev A,B,C,L,CL/RDA8826
Flashing protocol updated
Updated LOD tools ( flashing / customizing )

Spreadtrum SC6533/G:
Protocol updated
Support for REV2 bootrom mode activated
FW reading revised
Updated LOD tools ( flashing / customizing )

Spreadtrum SC6530/6531/A/C/E:
Revised Repair security feature
Flashing revised
-> Activated "Format FFS" during BINARY dump writing
-> Use that feature, if device not allow make direct format ( some C/E revision devices )
User code read revised - activated 2nd mode : from DUMP
-> Press and hold LEFT SHIFT key, while starting ReadUsercode code operation. Select desired dump file to read code.
Activated AUTO fixer for memory dumps
Internal loaders updated

Spreadtrum other:
Protocol updated
PAC handling revised
Improved Flashing procedure for SC7701/SC7702 devices
Improved Flashing procedure for SC6825/SC8825 devices

Known issues[*]/warnings[!]/info[I]:
1. [I] AUTO fixer for memory dumps
-> That feature will AUTOMATICALLY FIX dumps from devices with "abnormal" flash and memory layout ( issue found on number of devices 16MB flash with 8MB layout )
-> Just select binary dump in flashing tab or any other operation, which require file select.
2. [*] In some cases Format FFS may fail on E and C rev
-> Read Flash Dump, write it back. During Dump writing SW will ask you about FormatFFS.

can we unlock network mtn II shyne c291 is it supported if it is supported how do i go about it to unlock it

Tairou · 12-07-2018, 17:48

Verry good update
plz add SC6531DA in next update

Tairou · 12-07-2018, 22:09

Hello Infinity Team,please add the spd SC6531DA chipset in the next update

moniuzzaman · 12-15-2018, 13:16

lecom l800 read user code done by infinity box

Operation : Identify [ v1.03 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Spreadtrum Boot Block version 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

IMEI[1] : 359961070382494
IMEI[2] : 359961070382502

Done!
Elapsed: 00:00:20

Reconnect Power/Cable!

Operation : Read UserCode [ v1.03 ]

MODE : From Device
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Spreadtrum Boot Block version 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Reading data ...
Sorting data ...
STATE : ACTIVE : CODE : 5432

Done!
Elapsed: 00:00:26

Reconnect Power/Cable!

YellowBoss · 12-18-2018, 10:51

Quote:

Originally Posted by BAWAKE ADDAE

cm2 box price. i am in Ghana , my contact is +...is both whatsapp and telegram

Hello,

Please contact to your seller for details - https://www.infinity-box.com/buy/

mizan298 · 12-23-2018, 15:11

WALTON L7 6531E Read CODE
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ]

Reading data ...
Sorting data ...
STATE : ACTIVE : CODE : 7799

Done!
Elapsed: 00:00:39

Reconnect Power/Cable!

yasin.55 · 12-25-2018, 12:57

Hi Sir i need help how to read flash file 8.1.0 spd with cm2 or any ida

princesaddam · 12-26-2018, 11:38

Quote:

Originally Posted by yasin.55

Hi Sir i need help how to read flash file 8.1.0 spd with cm2 or any ida

Hello,
Wht error do u getting with SPD module 1.27,, Select cpu and do desire operation if any error plz post Logs for better help

InfinityHelp · 12-26-2018, 12:46

Quote:

Originally Posted by yasin.55

Hi Sir i need help how to read flash file 8.1.0 spd with cm2 or any ida

Dear Sir,
Please always post software operationlog text so supporters and other users can check it.

InfinityHelp · 12-26-2018, 12:50

Quote:

Originally Posted by Tairou

Hello Infinity Team,please add the spd SC6531DA chipset in the next update

Thanks for advice, work about new features is in progress

moniuzzaman · 12-27-2018, 12:56

spd 6530 format done by infinity box

Card found : 64C1CE3F , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.03

SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR

Operation : Read Flash [ v1.03 ]

----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00200000
BOOT_INIT : 0x7A56C157
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Read done, 0x00400000

Verify FlashContent
MCU verified
CAL verified
FAC verified

Device Info Details :
[0] : S03_ZTR_310_ROKEA
[1] : 8809
[2] : 8809e2
[3] : CT8851C
[4] : pasw_rda6625
[5] : flsh_spi32m
[6] : gc9102/gc9106/nv3021/st7735rsmall/rm68116/st7789v
[7] : bf3a01serial/gc6123/sp0820
[8] : rdabt_8809
[9] : rdafm_8809e
[10] : release
[11] : S03_ZTR_310_ROKEA_128x160_21KEY_ZTR7735HSD_SL9102L T_SL9106CTC_V01_20170727
[12] : 20170727
[13] : 2017-07-27_12:43:52
[14] : test_version

Saved to : C:\Users\maalas\Desktop\
Saved as : SC6533G_4MiB_S03_ZTR_310_ROKEA_2017-07-27_124352.ilod

Done!
Elapsed: 00:03:15

Reconnect Power/Cable!

Operation : Reset Settings [ v1.03 ]
----- > Powered On :
1. Power On device
2. Connect USB cable
3. When device show StorageMode : Press '0' button for a 5 second!
----- > Powered Off :
1. Insert USB cable
2. Wait when device show Charge icon
3. When device show StorageMode : Press '0' button for a 5 second!

Wait for device ...

Device Connected!
BOOT_PWR0 : 0x00200000
BOOT_INIT : 0x5A56C151
BOOT_MODE : BOOTROM
Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G
MEMD for flsh_spi32m Branch: none
Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ]
Performing MemoryInit
Selecting RL
Sending RL
Config : MemoryInit
Config : Loader
BOOT_MODE : RLOADER
Boot IV : 0xFBA2A250
Boot done!

Preparing PMT
Verifying PMT
Erasing 1474560 bytes

FileSystem format done!

Done!
Elapsed: 00:00:45

Reconnect Power/Cable!

unlockergsm2010 · 12-29-2018, 12:42

hello,

what can i do please,

best regards

11-25-2018, 10:56	#139 (permalink)
Mbonge Freak Poster Join Date: Jul 2008 Posts: 100 Member: 822589 Status: Offline Sonork: Mbo Thanks Meter: 18	support for mtn 11 shyne c291 [QUOTE=YellowBoss;13175445]Infinity Chinese Miracle II SCR/SPD-RDA v1.03: New models and features Supported CPU list: Spreadtrum: SC6530, SC6531, SC6531(A/C), SC6531E, SC6533, SC6533G RDA Mirco: RDA8851 rev A,B,C,L,CL RDA Micro: RDA8826 RDA Mirco RDA8851 rev A,B,C,L,CL/RDA8826 Flashing protocol updated Updated LOD tools ( flashing / customizing ) Spreadtrum SC6533/G: Protocol updated Support for REV2 bootrom mode activated FW reading revised Updated LOD tools ( flashing / customizing ) Spreadtrum SC6530/6531/A/C/E: Revised Repair security feature Flashing revised -> Activated "Format FFS" during BINARY dump writing -> Use that feature, if device not allow make direct format ( some C/E revision devices ) User code read revised - activated 2nd mode : from DUMP -> Press and hold LEFT SHIFT key, while starting ReadUsercode code operation. Select desired dump file to read code. Activated AUTO fixer for memory dumps Internal loaders updated Spreadtrum other: Protocol updated PAC handling revised Improved Flashing procedure for SC7701/SC7702 devices Improved Flashing procedure for SC6825/SC8825 devices Known issues[]/warnings[!]/info[I]: 1. [I] AUTO fixer for memory dumps -> That feature will AUTOMATICALLY FIX dumps from devices with "abnormal" flash and memory layout ( issue found on number of devices 16MB flash with 8MB layout ) -> Just select binary dump in flashing tab or any other operation, which require file select. 2. [] In some cases Format FFS may fail on E and C rev -> Read Flash Dump, write it back. During Dump writing SW will ask you about FormatFFS. can we unlock network mtn II shyne c291 is it supported if it is supported how do i go about it to unlock it

10-04-2018, 21:54	#136 (permalink)
BAWAKE ADDAE Insane Poster Join Date: Aug 2014 Location: ANYINAMAE, GHANA, DAMBAI Posts: 73 Member: 2244629 Status: Offline Sonork: 2244629 Thanks Meter: 5	cm2 box price. i am in Ghana , my contact is +233549880481 is both whatsapp and telegram

11-20-2018, 20:42	#138 (permalink)
immarth Junior Member Join Date: Feb 2014 Location: Ghana Posts: 15 Member: 2135376 Status: Offline Thanks Meter: 1	HELP NEED TO REVIVE DEAD PHONE READ DUMP FILE AND FLASH TO REMOVE USER LOCK NOW PHONE DEAD Operation : Write Flash [ v1.03 ] 1. Power off device 2. Press and hold BootKey or use BootCable 3. Insert cable and battery in device! Wait for device ... Device Connected! BootVersion : SPRD3 BootSource : InternalLibrary BootVersion : Spreadtrum Boot Block version 1.2 Port speed : 921600 FDL Flash : Control transfered! Boot Done! BIN : Format UserData BIN : Format UserData Ok! Error : Flashing failed! Remove battery, cable. Check cable and connection. Repeat operation! PLEASE HOW CAN I REVIVE THIS PHONE CS0_MEM : SPI : [FIDELIX] : FM25Q128 : 0x01000000 [ 16MiB ]

12-07-2018, 17:48	#140 (permalink)
Tairou Junior Member Join Date: Mar 2010 Location: Nikki-Benin Posts: 23 Member: 1262706 Status: Offline Sonork: 100.1622820 Thanks Meter: 0	Verry good update plz add SC6531DA in next update

12-07-2018, 22:09	#141 (permalink)
Tairou Junior Member Join Date: Mar 2010 Location: Nikki-Benin Posts: 23 Member: 1262706 Status: Offline Sonork: 100.1622820 Thanks Meter: 0	Hello Infinity Team,please add the spd SC6531DA chipset in the next update

12-15-2018, 13:16	#142 (permalink)
moniuzzaman Freak Poster Join Date: Dec 2008 Posts: 247 Member: 931121 Status: Offline Thanks Meter: 100	lecom l800 read user code done by infinity box Operation : Identify [ v1.03 ] 1. Power off device 2. Press and hold BootKey or use BootCable 3. Insert cable and battery in device! Wait for device ... Device Connected! BootVersion : SPRD3 BootSource : InternalLibrary BootVersion : Spreadtrum Boot Block version 1.2 Port speed : 921600 FDL Flash : Control transfered! Boot Done! CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ] IMEI[1] : 359961070382494 IMEI[2] : 359961070382502 Done! Elapsed: 00:00:20 Reconnect Power/Cable! Operation : Read UserCode [ v1.03 ] MODE : From Device 1. Power off device 2. Press and hold BootKey or use BootCable 3. Insert cable and battery in device! Wait for device ... Device Connected! BootVersion : SPRD3 BootSource : InternalLibrary BootVersion : Spreadtrum Boot Block version 1.2 Port speed : 921600 FDL Flash : Control transfered! Boot Done! CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ] Reading data ... Sorting data ... STATE : ACTIVE : CODE : 5432 Done! Elapsed: 00:00:26 Reconnect Power/Cable!

12-23-2018, 15:11	#144 (permalink)
mizan298 Insane Poster Join Date: Nov 2006 Location: Bangladesh Posts: 81 Member: 387577 Status: Offline Thanks Meter: 7	WALTON L7 6531E Read CODE 1. Power off device 2. Press and hold BootKey or use BootCable 3. Insert cable and battery in device! Wait for device ... Device Connected! BootVersion : SPRD3 BootSource : InternalLibrary BootVersion : Infinity SCR SC6531E Loader v 1.2 Port speed : 921600 FDL Flash : Control transfered! Boot Done! CS0_MEM : SPI : [WINBOND] : W25Q32 : 0x00400000 [ 4MiB ] Reading data ... Sorting data ... STATE : ACTIVE : CODE : 7799 Done! Elapsed: 00:00:39 Reconnect Power/Cable!

12-25-2018, 12:57	#145 (permalink)
yasin.55 Freak Poster Join Date: Jan 2012 Location: south africa Posts: 186 Member: 1712315 Status: Offline Sonork: 100.1602299 Thanks Meter: 65	Hi Sir i need help how to read flash file 8.1.0 spd with cm2 or any ida

12-27-2018, 12:56	#149 (permalink)
moniuzzaman Freak Poster Join Date: Dec 2008 Posts: 247 Member: 931121 Status: Offline Thanks Meter: 100	spd 6530 format done by infinity box Card found : 64C1CE3F , v0137 Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.03 SCRD mode : AUTO SPRD mode : SC6530 : REV : 0000 : NOR Operation : Read Flash [ v1.03 ] ----- > Powered On : 1. Power On device 2. Connect USB cable 3. When device show StorageMode : Press '0' button for a 5 second! ----- > Powered Off : 1. Insert USB cable 2. Wait when device show Charge icon 3. When device show StorageMode : Press '0' button for a 5 second! Wait for device ... Device Connected! BOOT_PWR0 : 0x00200000 BOOT_INIT : 0x7A56C157 BOOT_MODE : BOOTROM Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G MEMD for flsh_spi32m Branch: none Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ] Performing MemoryInit Selecting RL Sending RL Config : MemoryInit Config : Loader BOOT_MODE : RLOADER Boot IV : 0xFBA2A250 Boot done! Read done, 0x00400000 Verify FlashContent MCU verified CAL verified FAC verified Device Info Details : [0] : S03_ZTR_310_ROKEA [1] : 8809 [2] : 8809e2 [3] : CT8851C [4] : pasw_rda6625 [5] : flsh_spi32m [6] : gc9102/gc9106/nv3021/st7735rsmall/rm68116/st7789v [7] : bf3a01serial/gc6123/sp0820 [8] : rdabt_8809 [9] : rdafm_8809e [10] : release [11] : S03_ZTR_310_ROKEA_128x160_21KEY_ZTR7735HSD_SL9102L T_SL9106CTC_V01_20170727 [12] : 20170727 [13] : 2017-07-27_12:43:52 [14] : test_version Saved to : C:\Users\maalas\Desktop\ Saved as : SC6533G_4MiB_S03_ZTR_310_ROKEA_2017-07-27_124352.ilod Done! Elapsed: 00:03:15 Reconnect Power/Cable! Operation : Reset Settings [ v1.03 ] ----- > Powered On : 1. Power On device 2. Connect USB cable 3. When device show StorageMode : Press '0' button for a 5 second! ----- > Powered Off : 1. Insert USB cable 2. Wait when device show Charge icon 3. When device show StorageMode : Press '0' button for a 5 second! Wait for device ... Device Connected! BOOT_PWR0 : 0x00200000 BOOT_INIT : 0x5A56C151 BOOT_MODE : BOOTROM Boot_CPU : 0x08090007 : [SPREADTRUM] : SC6533G MEMD for flsh_spi32m Branch: none Boot_CS0 : 0x00000000 : SPI : [SPIDEF] : 25Q32 : 0x00400000 [ 4MiB ] Performing MemoryInit Selecting RL Sending RL Config : MemoryInit Config : Loader BOOT_MODE : RLOADER Boot IV : 0xFBA2A250 Boot done! Preparing PMT Verifying PMT Erasing 1474560 bytes FileSystem format done! Done! Elapsed: 00:00:45 Reconnect Power/Cable!

12-29-2018, 12:42	#150 (permalink)
unlockergsm2010 Insane Poster Join Date: Nov 2010 Location: **** Posts: 85 Member: 1456151 Status: Offline** Thanks Meter: 8	hello, what can i do please, best regards