Infinity Chinese Miracle II SCR/SPD-RDA v1.05 - New models and features
 

Infinity Chinese Miracle II SCR/SPD-RDA v1.05 - New models and features



As ordinary, Infintiy Team continue to release unique and world-first software features, algorithms and methods.


Supported CPU list:

Spreadtrum: SC6530, SC6531, SC6531(A/C/D)
UniSoc: SC6531E, SC6533, SC6533G
RDA Mirco: RDA8851 rev A,B,C,L,CL
RDA Micro: RDA8826

RDA Mirco RDA8851 rev A,B,C,L,CL
RDA Micro RDA8826
Spreadtrum SC6533/G:

Updated LOD tools ( Factory LOD support revised )
UserCode reading improved

Spreadtrum/UniSoc SC6530/6531/A/C/D/E:

New feature activated: Complete identification
During Binary Dump selection SW will extract complete device info ( build version, time, HW details etc. )
During PAC file selection SW will extract complete device info ( build version, time, HW details etc. )
During Flash Reading SW will extract complete device info ( build version, time, HW details etc. )
Readout naming changed to DeviceInfo details instead of flash size/flash vendor

Repair security revised
Database revised, loaders updated ( extended range of supported SC6531EFM devices with 4-8MB flash )

Spreadtrum/UniSoc other:
Protocol updated, error codes handling activated
SC6531 with 16MB flash support revised
FTM during flashing now make DNVM clean, FS clean and structure verification
UserCode reading improved
Some other bugfixes and small changes

Info:
"HardLock" detection feature for SP-locked device activated under test

We are looking for SP-locked samples RDA Micro / UniSoc / SPDR FP platforms. Please contact to rd [at] infinity-box.com if you have units for test on hands.




Password for archive file (if any) is: 12345678


Download link #1
Download link #2

https://www.infinity-box.com/cdn/tg48.png https://www.infinity-box.com/cdn/yt48.png https://www.infinity-box.com/cdn/fb48.png https://www.infinity-box.com/cdn/tw48.png https://www.infinity-box.com/cdn/ios2-48.png https://www.infinity-box.com/cdn/j48.png

- How to upload files to support

Infinity-Box 14 years (2005 - 2019) updates and support as nobody else !

Another Exclusive Update, Thanks Infinity Team

to use this module which card version must b 1.37 will work

Exclusive Update... Thanks Cm2

Version should be v01.38

I have cm2 and install setup ,when run spd 2 setup error 0136,how to solve this problem and how to update cm2 spd2 interface,old setup is working but new setup not working ?\

Thanks for the update team

hope in feture sp lock will be activated

Hello,

It looks like your dongle support period is expired.
How to check - https://www.infinity-box.com/doc/?r=17

If support is expired please contact to your seller and renew support - https://www.infinity-box.com/buy/

software modules rebuilded one-by-one, work is in progress

amazing

During Binary Dump selection SW will extract complete device info ( build version, time, HW details etc. )
During PAC file selection SW will extract complete device info ( build version, time, HW details etc. )
During Flash Reading SW will extract complete device info ( build version, time, HW details etc. )

yes non stop update..................................

i think team is starting hardworking on base new chips and latest mathod style.

Thanks For The Very Good Update.

my dongle is in 1.37.02 and dongle manager says no update, does this mean i cannot use this version on my dongle anymore?

how about QLM EXE
OVER 2 YEARS NO UPDATE

Thanks!
 

THANKS @JayDi SIR
THANKS @INFINITY-BOX TEAM

HARD WORK SUCCESS UPDATE


GOOD LUCK!
____________________
WORKING ON MY BRAIN

software modules rebuilded one-by-one, work is in progress


nexy time if you want to write something you must read thread name. current thread is not about QLM

Hello,

It looks like your dongle support period is expired.
How to check - https://www.infinity-box.com/doc/?r=17

If support is expired please contact to your seller and renew support and after that you will be able to run latest software - https://www.infinity-box.com/buy/

Thanks For Very Good Update

Update CM2QLM?

Why very longtime no have uptade
 

INFINITY CM2 IS VERY GOOD PROJECT
BUT THE NEW AND THE NEXT UPDATE IS VERY LONG TIME

WE ARE WAITING A BIG UPTADE FROM CM2 AND VERY FAST

THE INFINITY CM2 SCR IS NOT VERY INTERESSING FOR ALL USER CM2 BOX or DONGLE AND IT IS NOT A GOOD BEESNESSE

WE NEED UPDTATE FOR OTHER MODULE OF CM2

cm2 update
 

i want buy it ,but i don't know how to do

Infinity update is for experts only. Not for them who wants large models list, which are already supported by cm2 long ago :)

Good update from best team.

thank you :)

please focus more MTK thank you sir

Contact to any seller from this list - https://www.infinity-box.com/buy/

software modules rebuilded one-by-one, work is in progress

software modules rebuilded one-by-one, work is in progress

Please next time if you want to write something you should read thread name. current thread is not about QLM

Hm... Look here please - https://www.infinity-box.com/news/

thanks for the update

Thank you.
I think it will be so great if infi team can help us solve our problem, or make it more easy n cheaper, bout oppo n vivo or xiaomi with server auth to make all of it offline

Great Update
plz add SPD8810/6820

https://cdn1.imggmi.com/uploads/2019...620df-full.jpg

chek

Thanks For The Very Good Update...

Bro your device Activation is Expire Update your device to infinity online then run your device
your device Firmware version is 1.37 but this setup run on 1.38...:):):)

itel it5081 read usercode done by infinity box

Operation : Read UserCode [ v1.05 ]

MODE : From Device
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Spreadtrum Boot Block version 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [FIDELIX] : FM25Q64 : 0x00800000 [ 8MiB ]

Reading data ...
Sorting data ...
STATE : ACTIVE : CODE : 123580

Done!
Elapsed: 00:00:31

Reconnect Power/Cable!

whats news nokia spd

Just one question,

Why is it very difficult to add SC6820 / SC8810

to support for mobile repair format , flashing and password remove?

SC6530 / SC6531 are way too older than those cpu.

Still there are many phones here in my country philippines

using sc6820 / sc8810 cpu in android phones.

Could you add it in the next updates?

Sorry for my ignorance....

renew your dongle activation, after that you will be able to update your dongle firmware to the latest version

Please Infinity Team, We so need this 6820/8810 CPU Support

no updates
 

qlm mtk not update cm2 iam alreday 2 years renvel hope in infinty team :confused::confused::confused::confused:

@DHAMODHAR
before make post with such title please look here - https://www.infinity-box.com/news/
And please next time read thread name before make new post. Current thread is about SCR/SPD-RDA.

if you are a programmer with good experience and if you are ready to create toyr own software for these CPU you are always welcome to contact me to discuss cooperation and payment.
it's not a joke but job offer. If you are ready to spend your time with development for old CPU you are always welcome.

Please give me more information about your request

Thread created 10th January 2015
https://forum.xda-developers.com/and...atrum-t2998862


Are you sure we must stop other work and move in this direction ?

can you check your "chinese phones" back sticker imei and imei returned by *06# - is it the same ?

Hello,

It looks like your dongle support period is expired.
How to check - https://www.infinity-box.com/doc/?r=17

If support is expired please contact to your seller and renew support - https://www.infinity-box.com/buy/

this kind of solutions are not so easy to implement

Gfive Gold 6531EFM Read Flash With New Update


Operation : Read Flash [ v1.05 ]

1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!

Wait for device ...

Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR SC6531E Loader v 1.2
Port speed : 921600
FDL Flash : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Read Flash Ok, Size : 4.00 MiB

[VERSION] Gfive_Gold_B113_V01_02252019
Project Version: SC6531EFM_BAR
MMI Version: SC6531EFM_BAR
BASE Version: BASE_SVN
HW Version: SC6531EFM_BAR
02-25-2019 10:26:19
LOG Version: V1.0.1
Saved to : C:\Users\sajidi\Desktop\[VERSION] Gfive_Gold_B113_V01_02252019.bin

Done!
Elapsed: 00:00:49

Reconnect Power/Cable!