infinity team help - GSM-Forum

david_aguirre · 10-03-2008, 04:51

n95 cannot format here is the logs

log: [10/2/2008 8:24:57 PM] ====
COM5 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read eeprom
Boot...
Press and HOLD Power button now !
baud autodetection active
9600 autodetect
Connecting, wait...
error: can't detect CPU id
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect" box.
Boot Fail
Finished, time used: 4 sec
Remove/Install battery now !

**InfinitySupport** · 10-03-2008, 08:19

Hello,

There is no any connection phone with software, you need to double check your cable and press and hold phone "power" button during boot process.

10-03-2008, 04:51	#1 (permalink)
david_aguirre Freak Poster Join Date: Feb 2008 Location: MX-KEY is the BEST NOKIA TOOL Posts: 237 Member: 698672 Status: Offline Thanks Meter: 62	infinity team help n95 cannot format here is the logs log: [10/2/2008 8:24:57 PM] ==== COM5 [VCP0] selected Device: Autodetect 6205-6227 NOR Checking data, wait... advanced flash detection enabled eeprom backup enabled, it may takes several minutes ! Action: read eeprom Boot... Press and HOLD Power button now ! baud autodetection active 9600 autodetect Connecting, wait... error: can't detect CPU id Release Power button now ! in case of initial connection problem: on/off "Boot baudrate autoselect" box. Boot Fail Finished, time used: 4 sec Remove/Install battery now !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Infinity can't unlock MXNEC N9 chip Infineon 7880, Infinity team help me !	coolderheart	Infinity-Box	1	11-15-2009 06:12
infinity team help all infinity user	TUR@N ALAM	Infinity-Box	3	08-09-2008 08:59
infinity team help	.:iTRi:.	Infinity-Box	4	02-23-2007 11:19
infinity team help !!	REALTHOMAS	Infinity-Box	6	07-17-2006 17:26
@ infinity team help needed for Alcatel cable	chowdary	Infinity-Box	2	02-11-2006 10:52

10-03-2008, 08:19	#2 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, There is no any connection phone with software, you need to double check your cable and press and hold phone "power" button during boot process.