infinity team need help sams189 - GSM-Forum

azmeena · 04-07-2011, 13:40

Hi,

I need 1.41 set up for unlock s189.

Thanks

azmeena · 04-07-2011, 13:54

I got 1.41 version but not conecting plz help.

OM206 [sscdmdm0] selected
module v1.41
Device: Samsung-SCH-S189
operation: Rebuild EFS/NV
Phone should be Switched ON !
connecting...
Connecting, wait...
error: can't activate test mode
If phone can not be connected after several tries make this:
1. Insert original sim card in phone
2. Power-On phone
3. go to Menu, press 6 then * and type password 123456
4. go to "Port Map", HKF
5. select "UART1"
error: operation failed
Finished, time used: 25 sec

I made above setting in phone but same.

<<<MEGATRON>>> · 04-07-2011, 14:23

Quote:

Originally Posted by azmeena

I got 1.41 version but not conecting plz help.

OM206 [sscdmdm0] selected
module v1.41
Device: Samsung-SCH-S189
operation: Rebuild EFS/NV
Phone should be Switched ON !
connecting...
Connecting, wait...
error: can't activate test mode
If phone can not be connected after several tries make this:
1. Insert original sim card in phone
2. Power-On phone
3. go to Menu, press 6 then * and type password 123456
4. go to "Port Map", HKF
5. select "UART1"
error: operation failed
Finished, time used: 25 sec

I made above setting in phone but same.

Hello,
Y Using Old Version? Use Latest 1.49 And Connect Ur Phone Properly With Back Cable And Follow This
1,Rebuild
2,Unlock

NOTE-ONLY OLD VERSION OF MTS S189 IS SUPPORTED
Wbr
<<<Megatron>>>

azmeena · 04-07-2011, 15:10

Quote:

Originally Posted by <<<MEGATRON>>>

Hello,
Y Using Old Version? Use Latest 1.49 And Connect Ur Phone Properly With Back Cable And Follow This
1,Rebuild
2,Unlock

NOTE-ONLY OLD VERSION OF MTS S189 IS SUPPORTED
Wbr
<<<Megatron>>>

Brother, now I am using new version 1.49 but same problem. do you have pinout for this.plz help.

<<<MEGATRON>>> · 04-07-2011, 16:15

Quote:

Originally Posted by azmeena

Brother, now I am using new version 1.49 but same problem. do you have pinout for this.plz help.

Hello,
Run Shell Select Samsung U Will Find Pinout's
Wbr
<<<Megatron>>>

04-07-2011, 13:40	#1 (permalink)
azmeena Freak Poster Join Date: Nov 2008 Posts: 239 Member: 893361 Status: Offline Thanks Meter: 4	infinity team need help sams189 Hi, I need 1.41 set up for unlock s189. Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
need eeprom photo????	mobileinfo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-26-1999 11:35

04-07-2011, 13:54	#2 (permalink)
azmeena Freak Poster Join Date: Nov 2008 Posts: 239 Member: 893361 Status: Offline Thanks Meter: 4	I got 1.41 version but not conecting plz help. OM206 [sscdmdm0] selected module v1.41 Device: Samsung-SCH-S189 operation: Rebuild EFS/NV Phone should be Switched ON ! connecting... Connecting, wait... error: can't activate test mode If phone can not be connected after several tries make this: 1. Insert original sim card in phone 2. Power-On phone 3. go to Menu, press 6 then * and type password 123456 4. go to "Port Map", HKF 5. select "UART1" error: operation failed Finished, time used: 25 sec I made above setting in phone but same.