Infinity Team Need help UBISLATE 7CZ MTK 8312 Android 4.4.2 after flash dead. - GSM-Forum

.:MobileLife:. · 11-10-2014, 10:37

I have tow tabs of UBISLATE 7CZ both are MTK 8312 and hang on logo.

One tab is done in format with Android 4.2.2.

Another was 4.4.2 Kitkat not done in format.

I read full flash of 4.2.2 tab and write flash in 4.4.2 hang tab flashing done but tab is dead. Before flash I backuped the 4.4.2 now I am flashing Original beckup in dead tab but giving flashing error. Here is logs.

Read Flash Hang phone

Quote:

Start at : [10-Nov-14 / 10:49:44 AM]
Operation : Read Flash [ v1.05 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 124 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010034594D44335201115C6473419D
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : R3DMY
[eMMC] : FLASH_CID : 15010034594D44335201115C6473419D
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Read Ok , collect info
Brand : 8312D
ProdName : 8312D
ProdModel : 8312D
Device : 8312D
AndroidVer: 4.4.2
MTKxCPU : MT6571
MTKxPRJ : ALPS.KK1.MP7.V1.13
Saved to : C:\InfinityBox\CM2MTK\Flash\MT6571__8312D__8312D__ ALPS.KK1.MP7.V1.13__Android_4.4.2__20140721_025642 .ispff

Done!
Elapsed: 00:19:38
Reconnect Power/Cable!

Write Flash in hang phone.

Quote:

Load File
File_Info : mc706
FileVersion : MT6572
Load File Ok

Start at : [10-Nov-14 / 11:12:33 AM]
Operation : Flash [ v1.05 ]

======= Flash
Files set for flashing :
[ MCU ] : MT6572__ALPS__7CZ__ALPS.JB3.TABLET.MP.V1__Android_ 4.2.2__20140421_083453.ispff

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 124 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010034594D44335201115C6473419D
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : R3DMY
[eMMC] : FLASH_CID : 15010034594D44335201115C6473419D
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Brand : alps
ProdName : mc706
ProdModel : 7CZ
Device : mc706
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.TABLET.MP.V1

FlashFile is differs from eMMC settings, continue by user request

Flash pre-erase enabled
Erase Flash now ...
Flash pre-erase done

Write Flash now ...
[ MCU ] : MT6572__ALPS__7CZ__ALPS.JB3.TABLET.MP.V1__Android_ 4.2.2__20140421_083453.ispff

Init Ok , Sending blocks ...
Write done , 3700 blocks sent

Done!
Elapsed: 00:12:10
Reconnect Power/Cable!

Now I am trying to format, flash giving error need help.

Quote:

Start at : [10-Nov-14 / 11:25:36 AM]
Operation : Format FileSystem [ v1.05 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 89 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010034594D44335201115C6473419D
DA Stat : v4.2 on BBID : 0x8B
Configure emi settings
Error : DA init Failed! Error code : 0x5
Boot Error!
Elapsed: 00:00:09
Reconnect Power/Cable!

Finish at : [10-Nov-14 / 11:25:46 AM]

Start at : [10-Nov-14 / 11:26:21 AM]
Operation : Format FileSystem [ v1.05 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 89 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010034594D44335201115C6473419D
DA Stat : v4.2 on BBID : 0x8B
Configure emi settings
Error : DA init Failed! Error code : 0x5
Boot Error!
Elapsed: 00:00:05
Reconnect Power/Cable!

Finish at : [10-Nov-14 / 11:26:27 AM]

Start at : [10-Nov-14 / 11:26:34 AM]
Operation : Check / Read Info [ v1.05 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 89 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010034594D44335201115C6473419D
DA Stat : v4.2 on BBID : 0x8B
Configure emi settings
Error : DA init Failed! Error code : 0x5
Boot Error!

Operation Failed
Elapsed: 00:00:07
Reconnect Power/Cable!

Finish at : [10-Nov-14 / 11:26:43 AM]

Load File
File_Info : along12d_tb_kk
FileVersion : MT6571
Load File Ok

Start at : [10-Nov-14 / 11:27:26 AM]
Operation : Flash [ v1.05 ]

======= Flash
Files set for flashing :
[ MCU ] : MT6571__8312D__8312D__ALPS.KK1.MP7.V1.13__Android_ 4.4.2__20140721_025642.ispff

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 89 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010034594D44335201115C6473419D
DA Stat : v4.2 on BBID : 0x8B
Configure emi settings
Error : DA init Failed! Error code : 0x5
Boot Error!

Operation Failed
Elapsed: 00:00:08
Reconnect Power/Cable!

Finish at : [10-Nov-14 / 11:27:39 AM]

BR.
Siddeque.

Dzirt · 11-10-2014, 15:07

Hello.
Did you check, what you done???
You write 6572 series (8312DE) to 6571 series (8312DA).

.:MobileLife:. · 11-10-2014, 15:10

Quote:

Originally Posted by Dzirt

Hello.
Did you check, what you done???
You write 6572 series (8312DE) to 6571 series (8312DA).

What is the solution now please.

BR.
Siddeque.

Dzirt · 11-10-2014, 15:14

I can add those eMMC's , but I need that dump
MT6571__8312D__8312D__ALPS.KK1.MP7.V1.13__Android_ 4.4.2__20140721_025642.ispff
For make them support.

If file after 7zip is very big - PM me, we will make it by other way.

.:MobileLife:. · 11-11-2014, 07:04

Quote:

Originally Posted by Dzirt

I can add those eMMC's , but I need that dump
MT6571__8312D__8312D__ALPS.KK1.MP7.V1.13__Android_ 4.4.2__20140721_025642.ispff
For make them support.

If file after 7zip is very big - PM me, we will make it by other way.

Here is the zip file of dump.

https://mega.co.nz/#!hhoykTJZ!6Ns2rl...f7A5DmR5RpVXCY

BR.
Siddeque.

Dzirt · 11-11-2014, 07:26

That sh*it*ty mega.com not working for my region, so, take day or two for download.

kariakala · 11-11-2014, 07:43

Quote:

Originally Posted by Dzirt

That sh*it*ty mega.com not working for my region, so, take day or two for download.

I am downloading an uploading for you @ 4shared
wait few minutes ( just try to help )

http://www.4shared.com/zip/7VaRvZhOc..._ALPSKK1M.html

kariakala · 11-11-2014, 08:00

Mediafire download link

https://forum.gsmhosting.com/vbb/****************************/?x26lp00pc021ufp

Dzirt · 11-11-2014, 08:48

@kariakala, thanks! You save my time a lot

.:MobileLife:. · 11-11-2014, 11:48

Quote:

Originally Posted by Dzirt

That sh*it*ty mega.com not working for my region, so, take day or two for download.

Oh! I would not use next mega.co.cn for you.

Thanks

BR.
Siddeque.

Dzirt · 11-11-2014, 20:36

put that file : EMC - Download - 4shared
in CM2MTK/Boot/ folder

Try again after. Let me know result.

.:MobileLife:. · 11-12-2014, 06:43

Quote:

Originally Posted by Dzirt

put that file : EMC - Download - 4shared
in CM2MTK/Boot/ folder

Try again after. Let me know result.

Awesome Dizrt, flashing done dead tab now on but tab still hang.

Read Info

Quote:

Operation : Check / Read Info [ v1.05 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 16 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010034594D44335201115C6473419D
DA Stat : v4.2 on BBID : 0x8B
Configure emi settings
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : R3DMY
[eMMC] : FLASH_CID : 15010034594D44335201115C6473419D
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Initial info read Ok!

Done!
Elapsed: 00:00:12
Reconnect Power/Cable!

Load File
File_Info : along12d_tb_kk
FileVersion : MT6571
Load File Ok

Flashing

Quote:

Operation : Flash [ v1.05 ]

======= Flash
Files set for flashing :
[ MCU ] : MT6571__8312D__8312D__ALPS.KK1.MP7.V1.13__Android_ 4.4.2__20140721_025642.ispff

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 16 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010034594D44335201115C6473419D
DA Stat : v4.2 on BBID : 0x8B
Configure emi settings
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : R3DMY
[eMMC] : FLASH_CID : 15010034594D44335201115C6473419D
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

USBDL : Init HSUSB Ok!
Brand : 8312D
ProdName : 8312D
ProdModel : 8312D
Device : 8312D
AndroidVer: 4.4.2
MTKxCPU : MT6571
MTKxPRJ : ALPS.KK1.MP7.V1.13

Flash pre-erase enabled
Erase Flash now ...
Flash pre-erase done

Write Flash now ...
[ MCU ] : MT6571__8312D__8312D__ALPS.KK1.MP7.V1.13__Android_ 4.4.2__20140721_025642.ispff

Init Ok , Sending blocks ...
Write done , 3728 blocks sent

Done!
Elapsed: 00:12:09
Reconnect Power/Cable!

BR.
Siddeque.

Dzirt · 11-12-2014, 07:11

Does Format with "0" and "Spec Mode" (CACHE+UDA) not resolve problem?

.:MobileLife:. · 11-12-2014, 07:13

Quote:

Originally Posted by Dzirt

Does Format with "0" and "Spec Mode" (CACHE+UDA) not resolve problem?

Yes sir, format done but still hang.

Quote:

Operation : Format FileSystem [ v1.05 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 73 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6571
BB_CPU_HW : CA00
BB_CPU_SW : 8D00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6571_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010034594D44335201115C6473419D
DA Stat : v4.2 on BBID : 0x8B
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : R3DMY
[eMMC] : FLASH_CID : 15010034594D44335201115C6473419D
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Backup : Already exist
FMT Mode set to : 0
Format : Cache and UserData (Full Factory Reset)
Other : Set SpecFTM

Format CACHE block
Format block Ok!
Format UDA block
Format block Ok!

Done!
Elapsed: 00:00:39
Reconnect Power/Cable!

BR.
Siddeque.

Dzirt · 11-12-2014, 08:02

Aha, thanks. Wait for v1.06 (probably to 1.07) , I add "Debug Log" function, it can help us to determine the problem, if possible.

11-10-2014, 15:07	#2 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Hello. Did you check, what you done??? You write 6572 series (8312DE) to 6571 series (8312DA).

11-10-2014, 15:14	#4 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	I can add those eMMC's , but I need that dump MT6571__8312D__8312D__ALPS.KK1.MP7.V1.13__Android_ 4.4.2__20140721_025642.ispff For make them support. If file after 7zip is very big - PM me, we will make it by other way.

11-11-2014, 07:26	#6 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	That shitty mega.com not working for my region, so, take day or two for download.

11-11-2014, 08:00	#8 (permalink)
kariakala No Life Poster Join Date: Sep 2008 Location: India Posts: 1,963 Member: 851193 Status: Offline Sonork: 100.1615313 Thanks Meter: 348	Mediafire download link https://forum.gsmhosting.com/vbb/****************************/?x26lp00pc021ufp

11-11-2014, 08:48	#9 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	@kariakala, thanks! You save my time a lot

11-11-2014, 20:36	#11 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	put that file : EMC - Download - 4shared in CM2MTK/Boot/ folder Try again after. Let me know result.

11-12-2014, 07:11	#13 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Does Format with "0" and "Spec Mode" (CACHE+UDA) not resolve problem?

11-12-2014, 08:02	#15 (permalink)
Dzirt No Life Poster Join Date: Nov 2009 Location: Syberia Age: 34 Posts: 12,508 Member: 1157320 Status: Offline Thanks Meter: 6,192	Aha, thanks. Wait for v1.06 (probably to 1.07) , I add "Debug Log" function, it can help us to determine the problem, if possible.