i9+++ infinty box problem - GSM-Forum

kari11 · 05-27-2010, 22:11

Hi,

I have a problem. I've got a Sciphone i9+++ phone. I can not read frimware and flash. The software: Chiense Miracle v3.13.
Sends this message:
COM3 [VCP0] selected
module v3.13
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read firmware
====> Boot ...
Press and HOLD Power button now !
error: boot initialization step #3 failed: 85
error: boot initialization step #3 failed: 85
error: boot initialization step #3 failed: 85
19200 fixed
Connecting, wait...
error: boot phase#1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 4 sec
Remove/Install battery now !

The Pin-finder software sends this message:
software version: 1.20
cable type: 1x12 (L12C)
platform: TI: Hercules, Calypso, Locosto
searching adapter at COM3...
adapter found, version: 2000
pins: 12, plain
power cycles: 1
activation cycles: 20
power-off delay: 20
start Rx/Tx: 1/1
Loading configuration...
Initializing...
Press and HOLD phone Power button now !
detecting pins...
result: Rx:8 Tx:12
time required: 32 sec
Trying to Power-On...
Power On !

Can someone help me?
Kari

**InfinitySupport** · 05-28-2010, 11:55

Hello,

What is this phone CPU chip type ?

kari11 · 05-28-2010, 18:35

Hello,

The phone's menu shows: MT6225, E05.
You may have program (ChineseMiracle) , to misplace the pins?

I can not read from the flash.

Kari

kalengela · 06-04-2010, 07:51

kari11: i do formate my sci i9+++ by using infinity box.here is pin out tx 7 amd rx 8

kalengela · 06-04-2010, 08:03

Here is pinout of sci i9+++ tx 7 and rx 8.enjoy it

kari11 · 06-05-2010, 08:59

hello,
The Miracle Chiense program that I set the pin?

InfinityHelp · 06-07-2010, 10:32

Quote:

Originally Posted by kari11

hello,
The Miracle Chiense program that I set the pin?

hello!

sorry, we dont understand your question

mobilepoint · 06-09-2010, 12:30

Give me pinout picture please,,,,,,,,,,,,,,,,,,,,,

InfinityHelp · 06-09-2010, 18:10

Quote:

Originally Posted by mobilepoint

Give me pinout picture please,,,,,,,,,,,,,,,,,,,,,

hello!

check software version of phone by typing *#8375# or *#0000#
write it here, i will tell you your i9+++ pinout

kari11 · 06-14-2010, 21:13

hello,

the software version:
(VER) XS2501B-GEMINI-V84-8060T3ZAQ-BTC-PX-20100426-V0.62

thanks

InfinityHelp · 06-14-2010, 22:27

hello!

for version XS2501B-GEMINI-V8-TH-4050L0YBQ-20091124-V0.18 pinout is 7,8
i belive for you version it is correct too

pecana · 07-16-2010, 22:48

can you share your firmware please??? my phone got the same and it's not working anymore

mcjude · 07-17-2010, 02:38

Quote:

Originally Posted by pecana

can you share your firmware please??? my phone got the same and it's not working anymore

here we go sir good back up sci phone i9+++ click the link below

i9+++.bin - 4shared.com - online file sharing and storage - download

pecana · 07-17-2010, 09:34

Quote:

Originally Posted by mcjude

here we go sir good back up sci phone i9+++ click the link below

i9+++.bin - 4shared.com - online file sharing and storage - download

Thanks man i'm trying it right now

pecana · 07-17-2010, 09:59

I don't know how to thank you!!!!! My phone is working again!!!!!!
Thanks man!!!!!!! :d

05-27-2010, 22:11	#1 (permalink)
kari11 Junior Member Join Date: May 2010 Posts: 5 Member: 1296916 Status: Offline Sonork: 559412CE Thanks Meter: 0	i9+++ infinty box problem Hi, I have a problem. I've got a Sciphone i9+++ phone. I can not read frimware and flash. The software: Chiense Miracle v3.13. Sends this message: COM3 [VCP0] selected module v3.13 Device: Autodetect 6205-6227 NOR Checking data, wait... advanced flash detection enabled Action: read firmware ====> Boot ... Press and HOLD Power button now ! error: boot initialization step #3 failed: 85 error: boot initialization step #3 failed: 85 error: boot initialization step #3 failed: 85 19200 fixed Connecting, wait... error: boot phase#1 failed Release Power button now ! in case of initial connection problem: on/off "Boot baudrate autoselect" Boot Fail Finished, time used: 4 sec Remove/Install battery now ! The Pin-finder software sends this message: software version: 1.20 cable type: 1x12 (L12C) platform: TI: Hercules, Calypso, Locosto searching adapter at COM3... adapter found, version: 2000 pins: 12, plain power cycles: 1 activation cycles: 20 power-off delay: 20 start Rx/Tx: 1/1 Loading configuration... Initializing... Press and HOLD phone Power button now ! detecting pins... result: Rx:8 Tx:12 time required: 32 sec Trying to Power-On... Power On ! Can someone help me? Kari

06-04-2010, 08:03	#5 (permalink)
kalengela Junior Member Join Date: Jan 2005 Location: Tanzania Age: 44 Posts: 23 Member: 111919 Status: Offline Thanks Meter: 0	i do formate sci i9+++ by infinity box Here is pinout of sci i9+++ tx 7 and rx 8.enjoy it

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
6150 Lock Problem	Zeljko	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	10-16-2013 08:16
GId1 problem	old_man	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	10-18-2006 15:21
HELP: Problem with 5110	Xabi	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	07-16-1999 00:44

05-28-2010, 11:55	#2 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, What is this phone CPU chip type ?

05-28-2010, 18:35	#3 (permalink)
kari11 Junior Member Join Date: May 2010 Posts: 5 Member: 1296916 Status: Offline Sonork: 559412CE Thanks Meter: 0	Hello, The phone's menu shows: MT6225, E05. You may have program (ChineseMiracle) , to misplace the pins? I can not read from the flash. Kari

06-04-2010, 07:51	#4 (permalink)
kalengela Junior Member Join Date: Jan 2005 Location: Tanzania Age: 44 Posts: 23 Member: 111919 Status: Offline Thanks Meter: 0	kari11: i do formate my sci i9+++ by using infinity box.here is pin out tx 7 amd rx 8

06-05-2010, 08:59	#6 (permalink)
kari11 Junior Member Join Date: May 2010 Posts: 5 Member: 1296916 Status: Offline Sonork: 559412CE Thanks Meter: 0	hello, The Miracle Chiense program that I set the pin?

06-09-2010, 12:30	#8 (permalink)
mobilepoint No Life Poster Join Date: Nov 2005 Posts: 554 Member: 201343 Status: Offline Thanks Meter: 26	Give me pinout picture please,,,,,,,,,,,,,,,,,,,,,

06-14-2010, 21:13	#10 (permalink)
kari11 Junior Member Join Date: May 2010 Posts: 5 Member: 1296916 Status: Offline Sonork: 559412CE Thanks Meter: 0	hello, the software version: (VER) XS2501B-GEMINI-V84-8060T3ZAQ-BTC-PX-20100426-V0.62 thanks

06-14-2010, 22:27	#11 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! for version XS2501B-GEMINI-V8-TH-4050L0YBQ-20091124-V0.18 pinout is 7,8 i belive for you version it is correct too

07-16-2010, 22:48	#12 (permalink)
pecana Junior Member Join Date: Jul 2010 Posts: 24 Member: 1346734 Status: Offline Thanks Meter: 0	can you share your firmware please??? my phone got the same and it's not working anymore

07-17-2010, 09:59	#15 (permalink)
pecana Junior Member Join Date: Jul 2010 Posts: 24 Member: 1346734 Status: Offline Thanks Meter: 0	I don't know how to thank you!!!!! My phone is working again!!!!!! Thanks man!!!!!!! :d