Infinix Clone X510 SC7731C FRP Reset Done! - GSM-Forum

Kwesi_Roy_GH · 11-11-2016, 19:18

All Credits to buffer2k11

Card found: S/N : XXXXXXXX , v0134
Chinese Miracle II [SPD module] v 1.22

Start at : [11/11/2016 / 17:23:02]
Operation : Read FullFlash [ v1.22 ]

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 121 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v1.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Detected eMMC Flash , Structure detect Ok!

[FW_READER] : Prepare Ok!

- > Wait phone connected ...

Phone found! [ 121 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v1.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name : X510
Model Brand : Infinix
Model Device: X510
AndrVersion : 5.1
BaseBand CPU: SP7731CEB
Project Ver : VERSION_V10_20160617
Model Ext : X510

[Read Mode] : HSUSB : 0x3000

[FW_READER] : Reading Firmware Now ...

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731C_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x854.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : oem.bin
[Read Ok] : sysinfo.bin
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size : 1942 MiB
Saved to : C:\Users\Roy\Desktop\SP7731CEB_X510_5.1_VERSION_V1 0_20160617_X510\
Done!

Elapsed: 00:13:46

Reconnect Power/Cable!

Finish at : [11/11/2016 / 17:36:51]

Operation : Format File System / Reset Settings [ v1.22 ]
Settings : SmartFormat is On

1. Remove battery. Insert battery back
2. Press and hold 'VolumeUp' and 'VolumeDown' keys
3. Insert cable

==== Wait for phone...

Phone found! [ 121 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info] : If SW freeze here more, than 15 seconds - remove cable
FDL Ready!
Boot Ver : SC7731 Crev eMMC Loader v1.0
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

FlashMode Set : Ok!
Checking Structure ...
Detected eMMC Flash , Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size : 0x0000000067FF7000
State : 0x0001

Mount : /cache
Size : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch phone, until it fully bootup to "Welcome Screen"!

Android 5.x : Reset FRP Lock
Reset Ok!

Done!

Elapsed: 00:00:16

Reconnect Power/Cable!

Thanks bro

Kwesi_Roy_GH · 11-11-2016, 20:30

And thanks Infinity Team for hard work. If anybody needs this firmware, hit the thanks button and send private message.
Note: Not hit thanks button, don't send pm

chubbie · 11-11-2016, 21:05

on which O.S., did you get success

Kwesi_Roy_GH · 11-11-2016, 21:08

Quote:

Originally Posted by chubbie

on which o.s., did you get success

5.1 Read log
................

chubbie · 11-12-2016, 05:03

I mean, on which COMPUTER O.S. { XP or 7}

Kwesi_Roy_GH · 11-12-2016, 07:15

Quote:

Originally Posted by chubbie

I mean, on which COMPUTER O.S. { XP or 7}

Windows 7
..............

cloud-81 · 11-12-2016, 07:25

Can you share please, what help to resolve error Boot failed. I see all post success log but nobody explain solution.

11-11-2016, 19:18	#1 (permalink)
Kwesi_Roy_GH No Life Poster Join Date: May 2016 Location: Madina, Accra, GHANA Posts: 1,181 Member: 2575234 Status: Offline Thanks Meter: 1,134	Infinix Clone X510 SC7731C FRP Reset Done! All Credits to buffer2k11 Card found: S/N : XXXXXXXX , v0134 Chinese Miracle II [SPD module] v 1.22 Start at : [11/11/2016 / 17:23:02] Operation : Read FullFlash [ v1.22 ] 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 121 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC7731 Crev eMMC Loader v1.0 Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Detected eMMC Flash , Structure detect Ok! [FW_READER] : Prepare Ok! - > Wait phone connected ... Phone found! [ 121 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC7731 Crev eMMC Loader v1.0 Sending FLASH FDL FLASH FDL Ready! Boot Ok! Model Name : X510 Model Brand : Infinix Model Device: X510 AndrVersion : 5.1 BaseBand CPU: SP7731CEB Project Ver : VERSION_V10_20160617 Model Ext : X510 [Read Mode] : HSUSB : 0x3000 [FW_READER] : Reading Firmware Now ... [Read Ok] : u-boot-spl-16k.bin [Read Ok] : u-boot.bin [Read Ok] : prodnv.img [Read Ok] : sc7731C_CP0_modem.bin [Read Ok] : DSP_DM_Gx.bin [Read Ok] : nvitem_w.bin [Read Ok] : sc8830g_modem_CP2_Trunk_W15.49.3_Release.bin [Read Ok] : nvitem_wcn.bin [Read Ok] : logo_480x854.bin [Read Ok] : fblogo_480x854.bin [Read Ok] : boot.img [Read Ok] : system.img [Read Ok] : oem.bin [Read Ok] : sysinfo.bin [Build Ok] : cache.img [Read Ok] : recovery.img [Build Ok] : userdata.img AndroidInfo created Firmware Size : 1942 MiB Saved to : C:\Users\Roy\Desktop\SP7731CEB_X510_5.1_VERSION_V1 0_20160617_X510\ Done! Elapsed: 00:13:46 Reconnect Power/Cable! Finish at : [11/11/2016 / 17:36:51] Operation : Format File System / Reset Settings [ v1.22 ] Settings : SmartFormat is On 1. Remove battery. Insert battery back 2. Press and hold 'VolumeUp' and 'VolumeDown' keys 3. Insert cable ==== Wait for phone... Phone found! [ 121 ] Port Opened Sync... InitBoot Done [ 0x81 ] , Ver : SPRD3 Sync... Sending FDL [Info] : If SW freeze here more, than 15 seconds - remove cable FDL Ready! Boot Ver : SC7731 Crev eMMC Loader v1.0 Sending FLASH FDL FLASH FDL Ready! Boot Ok! FlashMode Set : Ok! Checking Structure ... Detected eMMC Flash , Structure detect Ok! eMMC phone detected! Will use 'Safe Format' mode! Mount : /data Size : 0x0000000067FF7000 State : 0x0001 Mount : /cache Size : 0x0000000009600000 State : 0x0001 Prepare Ok! Format Ok! Don't touch phone, until it fully bootup to "Welcome Screen"! Android 5.x : Reset FRP Lock Reset Ok! Done! Elapsed: 00:00:16 Reconnect Power/Cable! Thanks bro Last edited by Kwesi_Roy_GH; 11-11-2016 at 19:25.

11-11-2016, 20:30	#2 (permalink)
Kwesi_Roy_GH No Life Poster Join Date: May 2016 Location: Madina, Accra, GHANA Posts: 1,181 Member: 2575234 Status: Offline Thanks Meter: 1,134	And thanks Infinity Team for hard work. If anybody needs this firmware, hit the thanks button and send private message. Note: Not hit thanks button, don't send pm

11-11-2016, 21:05	#3 (permalink)
chubbie No Life Poster Join Date: May 2006 Location: heLL and beY0nd Posts: 996 Member: 281801 Status: Offline Sonork: 100.1608672 Thanks Meter: 158	on which O.S., did you get success

11-12-2016, 05:03	#5 (permalink)
chubbie No Life Poster Join Date: May 2006 Location: heLL and beY0nd Posts: 996 Member: 281801 Status: Offline Sonork: 100.1608672 Thanks Meter: 158	I mean, on which COMPUTER O.S. { XP or 7}

11-12-2016, 07:25	#7 (permalink)
cloud-81 Freak Poster Join Date: Jan 2007 Posts: 155 Member: 427167 Status: Offline Sonork: 100.1670875 Thanks Meter: 48	Can you share please, what help to resolve error Boot failed. I see all post success log but nobody explain solution.