infocus m350 blink problem after connect flash boot problem need help - GSM-Forum

wi fi · 11-25-2015, 07:07

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 54 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6752
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6732|MT6752_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4841473464040502A2ABBE9171
DA Stat : v4.2 on BBID : 0x8F
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00B0

Error : DA init Failed! Error code : 0x5
LErr : EMICFG_NOT_FOUND

Boot Error!

Operation Failed
Elapsed: 00:00:08
Reconnect Power/Cable!

preloader satus show not active (but preloader alive) phone blink condition

sneha · 11-25-2015, 07:16

dont press any key . use simple usb

wi fi · 11-25-2015, 07:21

Quote:

Originally Posted by sneha

dont press any key . use simple usb

already try normal method problem same

PASSIONATE_BOYS · 11-25-2015, 07:28

Hello,
InFocus M350 flasher uses it's own DA, that's why it's giving error.

Br.
Infinity Box Support Team.

wi fi · 11-25-2015, 07:31

Quote:

Originally Posted by PASSIONATE_BOYS

Hello,
InFocus M350 flasher uses it's own DA, that's why it's giving error.

Br.
Infinity Box Support Team.

mean this model DA not supported in this 1.37 cm2 version

PASSIONATE_BOYS · 11-25-2015, 08:03

Quote:

Originally Posted by wi fi

mean this model DA not supported in this 1.37 cm2 version

Looks like to me yes since it uses different flash tool SUTL3_v3.1.4 and has signed firmware. But still wait for Mr. JayDi who can clarify this.

Br.
Infinity Box Support Team

11-25-2015, 07:07	#1 (permalink)
wi fi Freak Poster Join Date: Jan 2010 Location: mystery city Posts: 355 Member: 1199392 Status: Offline Thanks Meter: 95	infocus m350 blink problem after connect flash boot problem need help 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 54 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6752 BB_CPU_HW : CA01 BB_CPU_SW : 8A00 BB_CPU_SB : 0001 BB_CPU_NM : [MediaTek] MT6732\|MT6752_S00 Processing BROM stage SecCfgVal : 0x00000000 BromVersion : 0x05 BLVersion : 0xFE Preloader Status : Not active (Erased) Processing DA stage DA Select done , sending DA Ver : MTK_AllInOne_DA_v7.1533.03 NAND_ID : 00000000000000000000000000000000 eMMC_ID : 90014A4841473464040502A2ABBE9171 DA Stat : v4.2 on BBID : 0x8F DRAM not initialized , configure DRAM Settings DRAM EmiReq Ok , 0x00B0 Error : DA init Failed! Error code : 0x5 LErr : EMICFG_NOT_FOUND Boot Error! Operation Failed Elapsed: 00:00:08 Reconnect Power/Cable! preloader satus show not active (but preloader alive) phone blink condition Last edited by wi fi; 11-25-2015 at 07:16.

11-25-2015, 07:16	#2 (permalink)
sneha No Life Poster Join Date: Aug 2006 Location: BHARAT Posts: 3,076 Member: 327043 Status: Offline Sonork: 100.1587811 Thanks Meter: 1,514	dont press any key . use simple usb

11-25-2015, 07:28	#4 (permalink)
PASSIONATE_BOYS No Life Poster Join Date: Jul 2007 Location: Infinity-Box Support- Posts: 9,321 Member: 541591 Status: Offline Sonork: 100.1611509 Thanks Meter: 7,361	Hello, InFocus M350 flasher uses it's own DA, that's why it's giving error. Br. Infinity Box Support Team.