GSM-Forum - infoucs m530 mtk6595 pattern lock problem

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)

- - infoucs m530 mtk6595 pattern lock problem (https://forum.gsmhosting.com/vbb/f296/infoucs-m530-mtk6595-pattern-lock-problem-1988753/)

infoucs m530 mtk6595 pattern lock problem

infoucs m530 mtk6595 pattern lock problem

Code:

Operation : Read PatternLock [ v1.29 ]
 

1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey
 

Wait for phone...

Phone found! [ 11 ]

Sync...

Inital regs read done

Boot Info : 

BB_CPU_ID : 6595

BB_CPU_HW : CB00

BB_CPU_SW : 8A00

BB_CPU_SB : 0001

BB_CPU_NM : [MediaTek] MT6595_S00

Processing BROM stage

BLVersion : 0xFE

SecCfgVal : 0x00000000

BromVersion : 0x05

BLVersion : 0xFE

Preloader Status : Not active (Erased)

Processing DA stage

DA Select done , sending 

DA Ver : MTK_AllInOne_DA_v7.1533.03

NAND_ID : 00000000000000000000000000000000

eMMC_ID : 110100303136474532001A70CF34816D

DA Stat : v3.2 on BBID : 0x8C

DRAM not initialized , configure DRAM Settings

DRAM EmiReq Ok , 0x00B0
 

Error : DA init Failed! Error code : 0x5

LErr : EMICFG_NOT_FOUND
 

Boot Error!
 

Operation Failed

Elapsed: 00:00:28

Reconnect Power/Cable!

Hello. Not use any "BootKey" , just a cable in powered off phone. What is result will be?

Quote:

Originally Posted by JayDi (Post 11272375)

Hello. Not use any "BootKey" , just a cable in powered off phone. What is result will be?

i m not use any bootkey just inset cable in off condition but same problem

That mean - need wait, when I find such FlashIC init data ( I not seen this FlashIC in any MTK phone yet ) , or use HardReset.

Quote:

Originally Posted by JayDi (Post 11272410)

That mean - need wait, when I find such FlashIC init data ( I not seen this FlashIC in any MTK phone yet ) , or use HardReset.

ok i m w8 for update

this phone cannot going hardreset