GSM-Forum

GSM-Forum (http://forum.gsmhosting.com/vbb/)
-   Infinity-Box (http://forum.gsmhosting.com/vbb/f296/)
-   -   Intex Aqua Power (MT6592)Read Flash Done.... user report (http://forum.gsmhosting.com/vbb/f296/intex-aqua-power-mt6592-read-flash-done-user-report-1954512/)

.::JYOTIRMAY::. 06-01-2015 10:16

Intex Aqua Power (MT6592)Read Flash Done.... user report
 
Operation : Read Flash [ v1.21 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 17 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6592
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6592_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010051375853414201F5B7E732A197
DA Stat : v4.2 on BBID : 0x8A
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BASX7
[eMMC] : FLASH_CID : 15010051375853414201F5B7E732A197
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : Intex
ProdName : Aqua_Power
ProdModel : Aqua_Power
Device : Aqua_Power
AndroidVer: 4.4.2
MTKxCPU : MT6592
MTKxPRJ : ALPS.KK1.MP1.V2.11

[Read Ok] : preloader_techain92_wet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6592 / V1.1.2 / techain92_wet_kk / EMMC
FW Size : 936 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6592__Intex__Aqua_Po wer__Aqua_Power__4.4.2__ALPS.KK1.MP1.V2.11\

All done!

Done!
Elapsed: 00:04:18
Reconnect Power/Cable!

.:MobileLife:. 06-01-2015 10:45

Here is another one repoar success.
 
Here another smoothy read factory firmware.:)

Quote:

Operation : Check / Read Info [ v1.21 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 23 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6592
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6592_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010051375853414201FAD9F2FEA1BB
DA Stat : v4.2 on BBID : 0x8A
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BASX7
[eMMC] : FLASH_CID : 15010051375853414201FAD9F2FEA1BB
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Done!
Elapsed: 00:00:07
Reconnect Power/Cable!


Operation : Read Flash [ v1.21 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 23 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6592
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6592_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 15010051375853414201FAD9F2FEA1BB
DA Stat : v4.2 on BBID : 0x8A
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BASX7
[eMMC] : FLASH_CID : 15010051375853414201FAD9F2FEA1BB
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : Intex
ProdName : Aqua_Power
ProdModel : Aqua_Power
Device : Aqua_Power
AndroidVer: 4.4.2
MTKxCPU : MT6592
MTKxPRJ : ALPS.KK1.MP1.V2.11

[Read Ok] : preloader_techain92_wet_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6592 / V1.1.2 / techain92_wet_kk / EMMC
FW Size : 1320 MiB
Scatter saved to : E:\Readed Factory Firmware CM2\MT6592__Intex__Aqua_Power__Aqua_Power__4.4.2__ ALPS.KK1.MP1.V2.11\

All done!

Done!
Elapsed: 00:05:45
Reconnect Power/Cable!




All times are GMT +1. The time now is 23:00.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.15333 seconds with 5 queries

SEO by vBSEO