intex cloud n4 rda 8810 - GSM-Forum

mediapeople · 11-05-2015, 16:15

Hi intex cloud n4 dead in flash need its ok fille it gives error during flasher with og flasher exe closes here is log via cm tool
Start at : [11/5/2015 / 8:37:36 PM]
Operation : Flash
======= Settings
Settings : Factory Settings Enabled
======= Flash
Files set for flashing :
RDATotal File : Intex_Cloud_N4_V02_India_SER_rda_total.bin
Load Ok : PDL1
Load Ok : PDL2
Load Ok : bootloader
Load Ok : boot
Load Ok : system
Load Ok : modem
Load Ok : customer
Load Ok : recovery

Waiting phone ...
Connect battery, press and hold 'VolUP' + 'PowerOn' buttons
Connect USB cable and keep hold buttons, until phone will be detected

Device found!
Handshake Ok!

[PDL] : Setting FlashMode ...
[PDLBoot] : Sending First PDL ...
[PDLBoot] : First Boot Ok!
[PDLBoot] : Sending Second PDL ...
[PDLBoot] : Second Boot Ok!
Boot Finished!
Handshake with FL Ok!

Factory Defaults Enabled, will reset UserData and Settings!
Format UDA partition ...
Format USER Ok

[PDLFlash] : Sending All Images

[PDLFlash] : Processing now BOOTLOADER
File : Intex_Cloud_N4_V02_India_SER_rda_total.bin
Flashing ...
[PDLFlash] : Flash region done!

[PDLFlash] : Processing now BOOT
File : Intex_Cloud_N4_V02_India_SER_rda_total.bin
Flashing ...
[PDLFlash] : ERROR! PartitionFinalize rejected! Check FlashFile and connection!
Flashing Done!
Reboot Phone

Elapsed: 00:00:28

JayDi · 11-05-2015, 16:32

Hello. Charge battery fully first.
Use last CM2RDA module.

mediapeople · 11-06-2015, 11:34

using RDA 1.0.3 & NOW BATTERY FULLY CHARGED

JayDi · 11-06-2015, 11:37

And what a result after?

mediapeople · 11-06-2015, 13:32

result stiil same when flash with og flasher exe closes
[PDLFlash] : ERROR! PartitionFinalize rejected! Check FlashFile and connection!

mediapeople · 11-07-2015, 11:17

no one in forum who provide other flash file when i was doing this set with original flasher exe closes after some percent but after write flash with cm completely dead & now team have no answers

JayDi · 11-07-2015, 11:34

I have answer - try other FW ( sure in 90% it NOT help ) , or better start from HW repair.

mediapeople · 11-07-2015, 13:28

plz give other firmware link or add read flash function for RDA

JayDi · 11-07-2015, 13:30

"Read FullFlash" operation on RDA will follow in some of next version. It still not completely safe for now.

alamtelecom458 · 02-14-2016, 12:01

Singleport_Download_Tools_Release_v3.0.0.2_2015032 3 flash with this tool 1000% okkkk my phone tasted

11-05-2015, 16:15	#1 (permalink)
mediapeople No Life Poster Join Date: Apr 2008 Location: inside forum Posts: 1,285 Member: 759477 Status: Offline Sonork: 100.1618763 Thanks Meter: 111	intex cloud n4 rda 8810 Hi intex cloud n4 dead in flash need its ok fille it gives error during flasher with og flasher exe closes here is log via cm tool Start at : [11/5/2015 / 8:37:36 PM] Operation : Flash ======= Settings Settings : Factory Settings Enabled ======= Flash Files set for flashing : RDATotal File : Intex_Cloud_N4_V02_India_SER_rda_total.bin Load Ok : PDL1 Load Ok : PDL2 Load Ok : bootloader Load Ok : boot Load Ok : system Load Ok : modem Load Ok : customer Load Ok : recovery Waiting phone ... Connect battery, press and hold 'VolUP' + 'PowerOn' buttons Connect USB cable and keep hold buttons, until phone will be detected Device found! Handshake Ok! [PDL] : Setting FlashMode ... [PDLBoot] : Sending First PDL ... [PDLBoot] : First Boot Ok! [PDLBoot] : Sending Second PDL ... [PDLBoot] : Second Boot Ok! Boot Finished! Handshake with FL Ok! Factory Defaults Enabled, will reset UserData and Settings! Format UDA partition ... Format USER Ok [PDLFlash] : Sending All Images [PDLFlash] : Processing now BOOTLOADER File : Intex_Cloud_N4_V02_India_SER_rda_total.bin Flashing ... [PDLFlash] : Flash region done! [PDLFlash] : Processing now BOOT File : Intex_Cloud_N4_V02_India_SER_rda_total.bin Flashing ... [PDLFlash] : ERROR! PartitionFinalize rejected! Check FlashFile and connection! Flashing Done! Reboot Phone Elapsed: 00:00:28

11-05-2015, 16:32	#2 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Hello. Charge battery fully first. Use last CM2RDA module.

11-06-2015, 11:34	#3 (permalink)
mediapeople No Life Poster Join Date: Apr 2008 Location: inside forum Posts: 1,285 Member: 759477 Status: Offline Sonork: 100.1618763 Thanks Meter: 111	using RDA 1.0.3 & NOW BATTERY FULLY CHARGED

11-06-2015, 11:37	#4 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	And what a result after?

11-06-2015, 13:32	#5 (permalink)
mediapeople No Life Poster Join Date: Apr 2008 Location: inside forum Posts: 1,285 Member: 759477 Status: Offline Sonork: 100.1618763 Thanks Meter: 111	result stiil same when flash with og flasher exe closes [PDLFlash] : ERROR! PartitionFinalize rejected! Check FlashFile and connection!

11-07-2015, 11:17	#6 (permalink)
mediapeople No Life Poster Join Date: Apr 2008 Location: inside forum Posts: 1,285 Member: 759477 Status: Offline Sonork: 100.1618763 Thanks Meter: 111	no one in forum who provide other flash file when i was doing this set with original flasher exe closes after some percent but after write flash with cm completely dead & now team have no answers

11-07-2015, 11:34	#7 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	I have answer - try other FW ( sure in 90% it NOT help ) , or better start from HW repair.

11-07-2015, 13:28	#8 (permalink)
mediapeople No Life Poster Join Date: Apr 2008 Location: inside forum Posts: 1,285 Member: 759477 Status: Offline Sonork: 100.1618763 Thanks Meter: 111	plz give other firmware link or add read flash function for RDA

11-07-2015, 13:30	#9 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	"Read FullFlash" operation on RDA will follow in some of next version. It still not completely safe for now.

02-14-2016, 12:01	#10 (permalink)
alamtelecom458 Freak Poster Join Date: Aug 2013 Location: roorkee Age: 23 Posts: 284 Member: 2006027 Status: Offline Sonork: 1645658 Thanks Meter: 36	Singleport_Download_Tools_Release_v3.0.0.2_2015032 3 flash with this tool 1000% okkkk my phone tasted