GSM-Forum

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)
-   -   iphone range check error (https://forum.gsmhosting.com/vbb/f296/iphone-range-check-error-811777/)

algeriano_19 08-23-2009 11:41
iphone range check error
 
COM8 [VCP0] selected
module v2.90
Device: Autodetect 6228-6230 NAND
Checking data, wait...
Action: read NAND flash
read mode: 01
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6230:8A02:8A02]...
CPU: MT6230
high speed boot On
chip: 0031:000F:0101
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
version: 3.02
cpu-id: 0C
loader: 3.0840.00.00
NAND id: EC795A3F
page size: 200+10
pages/block: 20
bits i/o: 08
address cycles: 04
blocks: 2000
external ram: 00000000
finalize connection...
done
emi configuration...
ram size: 04000000
emi configuration done
ram test...
pass 1...
pass 2...
pass 3...
pass 4...
done
NOR: 0000:000000000000 [00000000]
NAND: 00EC:0079005A003F [08400000]
NOR chip is not installed
Initialize Done
Set baud ...
460800
Set baud Done
Identification ...
ram test...
pass 1...
pass 2...
pass 3...
pass 4...
done
reading bootloader structure area (00010000 bytes)...
detecting bootloader structure...
source data: page only
rom info protocol ver: 04
ver. sw 1: APL228_PCB03_GPRS_MT6230_S02.APL228_20081218_V1_3. BIN
ver. sw 2: APL228_20081218_V1.3, 00000000
ffs offset/size: 02000000/06000000
id-page1 Ok

LoveLess 09-12-2009 15:04
Quote:
Originally Posted by algeriano_19 (Post 4774939)
COM8 [VCP0] selected
module v2.90
Device: Autodetect 6228-6230 NAND
Checking data, wait...
Action: read NAND flash
read mode: 01
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6230:8A02:8A02]...
CPU: MT6230
high speed boot On
chip: 0031:000F:0101
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
version: 3.02
cpu-id: 0C
loader: 3.0840.00.00
NAND id: EC795A3F
page size: 200+10
pages/block: 20
bits i/o: 08
address cycles: 04
blocks: 2000
external ram: 00000000
finalize connection...
done
emi configuration...
ram size: 04000000
emi configuration done
ram test...
pass 1...
pass 2...
pass 3...
pass 4...
done
NOR: 0000:000000000000 [00000000]
NAND: 00EC:0079005A003F [08400000]
NOR chip is not installed
Initialize Done
Set baud ...
460800
Set baud Done
Identification ...
ram test...
pass 1...
pass 2...
pass 3...
pass 4...
done
reading bootloader structure area (00010000 bytes)...
detecting bootloader structure...
source data: page only
rom info protocol ver: 04
ver. sw 1: APL228_PCB03_GPRS_MT6230_S02.APL228_20081218_V1_3. BIN
ver. sw 2: APL228_20081218_V1.3, 00000000
ffs offset/size: 02000000/06000000
id-page1 Ok
hi all and supporters..

i have the same pn on 6228 NAND cpu.. range check error..

InfinityHelp 09-13-2009 20:47
hello!

we know about this problem and working under improving it
update will follow nearest time

LoveLess 09-13-2009 21:33
Quote:
Originally Posted by InfinityHelp (Post 4842566)
hello!

we know about this problem and working under improving it
update will follow nearest time
thanx sir...

we will be wait for it..

systemworm 10-27-2009 21:13
Any news about range check error fixing?Have an Iphone C900 on hand and range check error problem when detecting this
detect standard fat offset pass #1...
detect standard fat data...

InfinitySupport 10-28-2009 02:20
Quote:
Originally Posted by systemworm (Post 4977551)
Any news about range check error fixing?Have an Iphone C900 on hand and range check error problem when detecting this
detect standard fat offset pass #1...
detect standard fat data...
Hello,

Please, try to use latest software.
Let's see results.

systemworm 10-28-2009 10:02
Quote:
Originally Posted by InfinitySupport (Post 4978002)
Hello,

Please, try to use latest software.
Let's see results.
Used the latest software the same error.Such errors appear mostly in 6225 based phones I think

InfinitySupport 10-28-2009 12:41
@systemworm
please, post here operation log or attach screenshot so we will be able to see where is the problem exactly.
Thanks !

systemworm 10-28-2009 20:49
Here is the log.
Code:
==== log opened: [10/27/2009 11:54:03 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.exe
Loading data, wait...
[Infinity Box] Chinese Miracle v2.93
S/N: ****:0112
Wait...
Device: Autodetect 6205-6227 NOR
Done

==== log: [10/27/2009 11:54:35 PM] ====
COM6 [VCP0] selected
module  v2.93
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: "sp-unlock"
unlock method: standard fast
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:8503:0006
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #02 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #03 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
921600
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device rom info...
detection phase #1...
detect device rom info finished
rom info structure: 2nd [standard] generation
rom info detection finished
rom info protocol ver: 04
ver. sw 1: E800_PXHT1F12_EVCOM2_MT6225S00.01_1_20090617.BIN
ver. sw 2: E800_PXHT1F12.01.1, 00000000
ffs offset/size: 01C00000/00400000
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset assigned: 00E00000
flash: EC257E25082501:18E59F00000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detecting startup code area #2...
................................................................................................................................................................................................................................................................
startup code area #2 is absent
detecting ffs/eeprom structure pass 1...
........................
detect standard fat location pass #1...
.......................................................
detect standard fat offset pass #1...
detect standard fat data...

==== log opened: [10/28/2009 12:06:31 AM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.exe
Loading data, wait...
[Infinity Box] Chinese Miracle v2.95
S/N: ****:0112
Wait...
Device: Autodetect 6205-6227 NOR
Done

==== log: [10/28/2009 12:06:59 AM] ====
COM6 [VCP0] selected
module  v2.95
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection disabled
Action: "sp-unlock"
unlock method: standard fast
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
error: can't detect CPU id
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 29 sec
Remove/Install battery now !

==== log: [10/28/2009 12:07:48 AM] ====
COM6 [VCP0] selected
module  v2.95
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection disabled
Action: "sp-unlock"
unlock method: standard fast
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6225:8A05:8A00]...
CPU: MT6225
high speed boot On
chip: 0001:8503:0006
status: FF
boot packet size: 0400
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung D 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung D 16Mb
detecting chip #02 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung D 16Mb
detecting chip #03 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung D 16Mb
number of flash chip/regions detected: 04/01
Initialize Done
Set baud ...
921600
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung D 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:18E59F00000000
flash: Samsung D 16Mb
it's time to stop: 18F09FE518F09FE518F09FE518F09FE518F09FE518F09FE5
number of flash chip/regions detected: 01/01
total flash region size: 01000000
searching rom info...
search rom info finished
rom info structure: 2nd [standard] generation
TCL-ID is absent
rom info detection finished
rom info protocol ver: 04
ver. sw 1: E800_PXHT1F12_EVCOM2_MT6225S00.01_1_20090617.BIN
ver. sw 2: E800_PXHT1F12.01.1, 00000000
address offset: 00000000
ffs offset/size: 01C00000/00400000
detecting ffs/eeprom area in 1 chip(s)...
standard ffs/eeprom offset assigned: 00E00000
flash: EC257E25082501:18E59F00000000
checking area [00000000]: 00000000-00FFFFFF...
ffs/eeprom found near: 00E00000
detecting ffs/eeprom size...
ffs/eeprom size: 00200000
ffs/eeprom chip: 00
ffs/eeprom area: 00000000:00E00000-00FFFFFF
detecting startup code area #2...
................................................................................................................................................................................................................................................................
startup code area #2 is absent
detecting ffs/eeprom structure pass 1...
........................
detect standard fat location pass #1...
.......................................................
detect standard fat offset pass #1...
detect standard fat data...

phungmobile 02-10-2011 22:53
help!!!
 
Quote:
Originally Posted by InfinitySupport (Post 4978993)
@systemworm
please, post here operation log or attach screenshot so we will be able to see where is the problem exactly.
Thanks !
hepl me.....................

InfinityHelp 02-13-2011 19:21
Quote:
Originally Posted by phungmobile (Post 6943185)
hepl me.....................
hello!

will gladly help, please post your Log


All times are GMT +1. The time now is 22:02.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.17921 seconds with 6 queries

SEO by vBSEO