Karbbon K25 can't repair IMEI - GSM-Forum

MTK CHIP · 05-28-2011, 09:52

Hello,

I receive Karbbon K25 set for Invalid IMEI.
First i try to connect the the set with Box....after some times i find it's Rx/Tx point & try to connect the phone........
After connecting phone can't repair IMEI
Here is the LOG -

Quote:

Action: "repair imei"
Model: Autodetect 6205-6239 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
imei-1: "
imei write method: mode-1
imei write channel: imei #1 for dual sim/mono CPU
new imei-1: 910025000263182
Verification failed, what to do:
1. Power-Off phone
2. Press software "Write" button
3. Power-On phone
operation failed !
Finished, time used: 7 sec
Remove/Install battery now !

Action Taken - Try safe FFS
Try Full FFS
Also try to repair IMEI with all mode but can't repair.

Also Inside phone has detect new version Here is the Log & Firmware.

Quote:

COM18 [VCP0] selected
module v3.84
Device: Karbonn-K25
Checking data, wait...
Action: read flash NAND
interface: BROM_DLL_v3.1016.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
Booting...
Release Power button now !
bootcode current/expected: 3.2/3.2
CPU: 6235:8A04:8A01
status: FF
bbchip bl ver: FE
NOR flash chip: not installed
NAND flash id[0026]: 0020:00A100000015 [ST] ST01GR3B
chip size: 128Mb
page/spare size: 0800/0040
pages per block: 0040
bits i/o: 08
address cycles: 04
internal RAM size: 00010000
external RAM: absent
done
Set baudrate (921600)...
done
ram test...
testing 32bit...
32bit ram test passed
testing 16bit...
16bit ram test passed
ram test passed
===> detect existing firmware structure...
detect ffs...
ffs offset/size: 02000000/06000000
firmware size: 32Mb
ffs size: 96Mb
detect sec ro...
detect custom parameters...
detect project-id...
project-id: K25_A1_IN-T001[C2096C_UTL_V2_5]
detect NAND info...
number of areas/bytes to read: 1:001A0000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
nfi area detection...
bootloader version: CELLONSZ35_09A_BOOTLOADER_V005_MT6235B_K25_A1_IN-T001[C2096C_UTL
nfi area detection (3 cores) finished: Ok
TCL-ID detection...
TCL-ID detection done
startup code area #1 detection...
startup code area #1 detection done
rom info ver: 07
sw version: CELLONSZ35_09A_PCB01_GPRS_MT6235B_S01.K25_A1_IN-T001[C2096C_UTL_V2_5].BIN
project-id: K25_A1_IN-T001[C2096C_UTL_V2_5], 00000000
code offset: 00000000
ffs offset/size [01]: 02000000/06000000
rom info structure: [standard] type (07)
TCL-ID is absent
===> done
====================
New firmware found (v.3.84, database date: 26.04.2011):
CELLONSZ35_09A_PCB01_GPRS_MT6235B_S01.K25_A1_IN-T001[C2096C_UTL_V2_5].BIN

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
area size: 128Mb
number of areas/bytes to read: 1:08000000
reading (HW_STORAGE_NAND NUTL_READ_PAGE_ONLY)...
file saved: c:\InfinityBox\MModule\Karbonn-K25_CELLONSZ35_09A_PCB01_GPRS_MT6235B_S01.K25_A1_I N-T001[C2096C_UTL_V2_5]__fullflash_20110510-215849.B4M.bin
Disconnect...
done
Finished, time used: 60 min 49 sec
Remove/Install battery now !

https://rapidshare.com/files/3188490...215849.B4M.bin

Also after some hours i will attach the pinout

InfinityHelp · 05-28-2011, 14:02

hello!

please post IMEI change Mode-2 log

MTK CHIP · 05-28-2011, 16:44

Quote:

Originally Posted by InfinityHelp

hello!

please post IMEI change Mode-2 log

COM27 [VCP0] selected
module v3.30
Action: "repair imei"
imei write method: mode-2
imei write channel: imei #1 for dual sim/mono CPU
new imei: 910025000263182
Model: Autodetect 6228-6268 NAND
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6235:8A04:8A01]...
CPU: MT6235
high speed boot On
chip: 0000:0000:0003
status: FF
rom: 4D573031
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6235,E04
Date: 2000.00.00
Version: 1.0
Version: K25_A1_IN-T001[C2096C_UTL_V2_5]
Version: CELLONSZ35_09A_HW
====================
New firmware found (v.3.30, database date: 16.05.2011):
K25_A1_IN-T001[C2096C_UTL_V2_5]

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
detecting structure #2...
error: detection failed (0 tries), read flash and send to support
connection Ok
detecting structure #2...
warning: wrong packet cs
error: detection failed (0 tries), read flash and send to support
error: can't read required data
error: operation failed !
Finished, time used: 17 sec
Remove/Install battery now !

MTK CHIP · 05-29-2011, 16:50

Team need Help ASAP
It's argent NOW!!!!!

YellowBoss · 05-29-2011, 17:25

did you tried to repair imei with MModule ?

MTK CHIP · 05-30-2011, 07:08

Quote:

Originally Posted by YellowBoss

did you tried to repair imei with MModule ?

Here is the Log with MModule...

Mode 1

Quote:

Action: "repair imei"
Model: Karbonn-K25
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
Phone detected, wait...
imei-1: "
imei write method: mode-1
new imei-1: 910025000263182
Verification failed, what to do:
1. Power-Off phone
2. Press software "Write" button
3. Power-On phone
operation failed !
Finished, time used: 6 sec
Remove/Install battery now !

Mode 2

Quote:

COM27 [VCP0] selected
module v3.91
Action: "repair imei"
imei write method: mode-2
new imei: 910025000263182
Model: Karbonn-K25
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6235:8A04:8A01]...
CPU: MT6235
chip: 0000:0000:0003
status: FF
rom: 4D573031
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6235,E04
Date: 2000.00.00
Version: 1.0
Version: K25_A1_IN-T001[C2096C_UTL_V2_5]
Version: CELLONSZ35_09A_HW
====================
New firmware found (v.3.91, database date: 16.05.2011):
K25_A1_IN-T001[C2096C_UTL_V2_5]

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: [email protected] or upload files to RapidShare AG, Cham, Switzerland or 4shared.com - free file sharing and storage
- include in your e-mail full text from phone back label (phone name etc.)
====================
83 byte(s) read
imei:
connection Ok
83 byte(s) read
verification...
error: verification failed
what to do:
1. be sure that you have full flash backup for emergency case
2. make "format ffs" in "complete" mode
3. power-on phone
4. power-off phone by "Power" button (DO NOT remove battery)
5. repeat current operation
error: operation failed !
Finished, time used: 17 sec
Remove/Install battery now !

Mode 3

Quote:

method is not supported yet

Now need some quick working solution for this set......ASAP

MTK CHIP · 05-31-2011, 07:45

@ YellowBoss
@ InfinityHelp

After pass 24hrs NO reply from support WHY ?

MTK CHIP · 05-31-2011, 10:37

@ Support,
Here is the Pinout of this model...

Need good solution for this problem for resolve this issue

MTK CHIP · 06-02-2011, 07:05

3 - 4 days passed.
But NO working solution from INFINITY TEAM.

I think from Infinity Team has no solution for this issue thats why supportes can't reply this thread.

sekharv · 06-07-2011, 05:36

mtk chip u solved this problem??? pls help i have same problem ,tku

MTK CHIP · 06-07-2011, 13:17

Quote:

Originally Posted by sekharv

mtk chip u solved this problem??? pls help i have same problem ,tku

YES dear i solve my problem.
BUT not with INFINITY BOX.

Problem solve by AVATOR BOX with single click.

a2zmobile_bhw · 12-15-2011, 06:26

i am still having prob to repair k25i invalid imei. how to solve

Initializing...
DA_LIB_VER_3.7.0.3
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=7 TXD=9
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6235, HardwareVer:8A01, SoftwareVer:8A04
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...

Initializing...
DA_LIB_VER_3.7.0.3
It is sensing the pinout fast,please hold on the phone Power key
RXD=7 TXD=9
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6235, HardwareVer:8A01, SoftwareVer:8A04
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 0000000000000000
Nand Flash ID: 002000A100000015
Read Hardware Information is done.
Get Project ID from phone...
Project ID: K25i_A1_IN-T001[V2_6_0]

akhil_bbsr · 12-15-2011, 06:52

cant possible any tool in market only og soft can do

InfinityHelp · 12-15-2011, 17:38

Quote:

Originally Posted by a2zmobile_bhw

i am still having prob to repair k25i invalid imei. how to solve

hello!

can you post Infinity log of Mode-1 and mode-2?

sabby_singh · 12-31-2011, 15:34

Quote:

Originally Posted by akhil_bbsr

cant possible any tool in market only og soft can do

plz send og file or link

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Working IMEI changed phone?	Barjo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	03-01-2015 11:49
what prog changes imei on 6110 and how do i do it?	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	07-31-2012 20:09
Nokia 51xx/61xx imei changer ver. 1.10??????	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	04-06-2012 16:22
6110 imei changer !!!!!!	Ravetrancer	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	5	11-21-2011 01:44

05-28-2011, 14:02	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! please post IMEI change Mode-2 log

05-29-2011, 16:50	#4 (permalink)
MTK CHIP Freak Poster Join Date: Mar 2010 Location: In Search of free BB5 rpl Posts: 468 Member: 1248595 Status: Offline Sonork: 100.1607313 Thanks Meter: 99	Team need Help ASAP It's argent NOW!!!!!

05-29-2011, 17:25	#5 (permalink)
YellowBoss Product Supporter Join Date: Jun 2009 Location: private Posts: 36,476 Member: 1043909 Status: Offline Thanks Meter: 60,926	did you tried to repair imei with MModule ?

05-31-2011, 07:45	#7 (permalink)
MTK CHIP Freak Poster Join Date: Mar 2010 Location: In Search of free BB5 rpl Posts: 468 Member: 1248595 Status: Offline Sonork: 100.1607313 Thanks Meter: 99	@ YellowBoss @ InfinityHelp After pass 24hrs NO reply from support WHY ?

05-31-2011, 10:37	#8 (permalink)
MTK CHIP Freak Poster Join Date: Mar 2010 Location: In Search of free BB5 rpl Posts: 468 Member: 1248595 Status: Offline Sonork: 100.1607313 Thanks Meter: 99	@ Support, Here is the Pinout of this model... Need good solution for this problem for resolve this issue

06-02-2011, 07:05	#9 (permalink)
MTK CHIP Freak Poster Join Date: Mar 2010 Location: In Search of free BB5 rpl Posts: 468 Member: 1248595 Status: Offline Sonork: 100.1607313 Thanks Meter: 99	3 - 4 days passed. But NO working solution from INFINITY TEAM. I think from Infinity Team has no solution for this issue thats why supportes can't reply this thread.

06-07-2011, 05:36	#10 (permalink)
sekharv Freak Poster Join Date: Feb 2007 Location: hyderabad Posts: 392 Member: 455693 Status: Offline Thanks Meter: 48	mtk chip u solved this problem??? pls help i have same problem ,tku

12-15-2011, 06:26	#12 (permalink)
a2zmobile_bhw Banned Join Date: Aug 2011 Location: Bhairahawa_Nepal Posts: 573 Member: 1638066 Status: Offline Thanks Meter: 170	i am still having prob to repair k25i invalid imei. how to solve Initializing... DA_LIB_VER_3.7.0.3 Tip: The phone must be able to power-on normally It is sensing the pinout fast,please hold on the phone Power key RXD=7 TXD=9 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6235, HardwareVer:8A01, SoftwareVer:8A04 Read info...ok, Waitting enter meta... Connected...can release Power button now, tracking... Initializing... DA_LIB_VER_3.7.0.3 It is sensing the pinout fast,please hold on the phone Power key RXD=7 TXD=9 Connecting...Please hold on the POWER key until the red gauge is going... Any errors please select another boot and try again. BB:6235, HardwareVer:8A01, SoftwareVer:8A04 Loading boot... INT_SYSRAM_BOOT test completed. Loading boot... Boot2 test completed. Nor Flash ID: 0000000000000000 Nand Flash ID: 002000A100000015 Read Hardware Information is done. Get Project ID from phone... Project ID: K25i_A1_IN-T001[V2_6_0]

12-15-2011, 06:52	#13 (permalink)
akhil_bbsr No Life Poster Join Date: May 2006 Location: MOBILE SOFTZONE BHUBANESWAR IN Posts: 3,509 Member: 271478 Status: Offline Sonork: 1590868 Thanks Meter: 1,070	cant possible any tool in market only og soft can do