china i9500 mt6572 hang after format.. - GSM-Forum

iqballk · 06-05-2015, 10:51

phones comes with pattern locked. formatted with 3 nd 0 FMT settings.. same with UDA+ CACH format.

Code:

Operation : Check / Read Info [ v1.21 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 164 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053454D30344728341F50EF9093
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : G40ME
[eMMC] : FLASH_CID : 45010053454D30344728341F50EF9093
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : alps
ProdName  : GT-I9500
ProdModel : GT-I9500
Device    : GT-I9500
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.2

Done!
Elapsed: 00:00:12
Reconnect Power/Cable!

backup attached..

JayDi · 06-05-2015, 11:37

Pattern can be read well without format.

By phone log seems as ok, try make Fix DL.

iqballk · 06-05-2015, 13:58

still hang after fix DL..

Code:

Chinese Miracle II  [MTK module] v 1.21

Operation : Fix DL Errors [ v1.21 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 164 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053454D30344728341F50EF9093
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : G40ME
[eMMC] : FLASH_CID : 45010053454D30344728341F50EF9093
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Done!
Elapsed: 00:00:15
Reconnect Power/Cable!

JayDi · 06-05-2015, 14:29

Backup seem similar as after format one. Did you format it with CM2 only?

iqballk · 06-06-2015, 11:40

yes.. only with cm2mtk.. still not tried with other tools..

iqballk · 06-06-2015, 11:42

glad.. any possibilities to write back spfb backup..!

JayDi · 06-06-2015, 11:51

When select BIN - choose in extension all or spfb , and write it.

iqballk · 06-06-2015, 12:03

not possible..

Code:

Load File 
Bad file detected!

JayDi · 06-06-2015, 13:34

Hm, seems as something wrong with phone. Make "Factory FW" read and show me log, please.

iqballk · 06-08-2015, 06:18

log of read Factory Firmware..

Code:

Operation : Read Flash [ v1.21 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 164 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053454D30344728341F50EF9093
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : G40ME
[eMMC] : FLASH_CID : 45010053454D30344728341F50EF9093
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 

Brand     : alps
ProdName  : GT-I9500
ProdModel : GT-I9500
Device    : GT-I9500
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.2

[Read Ok] : preloader_lightning89_wet_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Error] : Bad EXT data
Looks like unusable file , break!

Read Ok , collect info
Brand     : alps
ProdName  : GT-I9500
ProdModel : GT-I9500
Device    : GT-I9500
AndroidVer: 4.2.2
MTKxCPU   : MT6572
MTKxPRJ   : ALPS.JB3.MP.V1.2
File conversion error, file already exists! Saved as default!

Done!
Elapsed: 00:03:14
Reconnect Power/Cable!

JayDi · 06-08-2015, 07:22

Send me that files :

Quote:

preloader_lightning89_wet_jb3.bin
MBR
EBR1

I will check and make FSP.

iqballk · 06-08-2015, 15:15

readed factory files attached..

iqballk · 06-09-2015, 11:51

waiting for a fix.. at least revert back to locked state..

JayDi · 06-09-2015, 12:24

There is something wrong with eMMC partitions or modified storage sizes. Will make a fix. In some near version will make it in one button. Working on that now.

06-05-2015, 11:37	#2 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Pattern can be read well without format. By phone log seems as ok, try make Fix DL.

06-05-2015, 14:29	#4 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Backup seem similar as after format one. Did you format it with CM2 only?

06-06-2015, 11:40	#5 (permalink)
iqballk No Life Poster Join Date: Jul 2002 Location: sri lanka Age: 39 Posts: 1,436 Member: 13932 Status: Offline Sonork: 100.1609876 Thanks Meter: 410	yes.. only with cm2mtk.. still not tried with other tools..

06-06-2015, 11:42	#6 (permalink)
iqballk No Life Poster Join Date: Jul 2002 Location: sri lanka Age: 39 Posts: 1,436 Member: 13932 Status: Offline Sonork: 100.1609876 Thanks Meter: 410	glad.. any possibilities to write back spfb backup..!

06-06-2015, 11:51	#7 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	When select BIN - choose in extension all or spfb , and write it.

06-06-2015, 12:03	#8 (permalink)
iqballk No Life Poster Join Date: Jul 2002 Location: sri lanka Age: 39 Posts: 1,436 Member: 13932 Status: Offline Sonork: 100.1609876 Thanks Meter: 410	not possible.. Code: Load File Bad file detected!

06-06-2015, 13:34	#9 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Hm, seems as something wrong with phone. Make "Factory FW" read and show me log, please.

06-09-2015, 11:51	#13 (permalink)
iqballk No Life Poster Join Date: Jul 2002 Location: sri lanka Age: 39 Posts: 1,436 Member: 13932 Status: Offline Sonork: 100.1609876 Thanks Meter: 410	waiting for a fix.. at least revert back to locked state..

06-09-2015, 12:24	#14 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	There is something wrong with eMMC partitions or modified storage sizes. Will make a fix. In some near version will make it in one button. Working on that now.