KG270 flashing fails in 98% what can be the problem with it? - GSM-Forum

NawabN Sahoo · 08-31-2009, 05:07

I want to flash a LG KG270 it flashing process goes upto 98% and than Stop and gives this Error

Quote:

Check memory Done
Write ...
reset...
done
Erasing: Firmware
Writing: Firmware
repair write error [00400000:0800]...
error: write failed[00400000]
Write Failed
Finished, time used: 46 sec
Remove/Install battery now !

As customer has told phone lost its Software when he was playing with it and it is not physically damaged so what can be the problem?

WBR

**InfinitySupport** · 08-31-2009, 22:10

Hello,

if flash process stop always at the same % it may be problem with phone hardware, f.e. damaged or bad soldered flash chip.
Also open phone and that that there is no water inside.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
what can be the problem of this nokia 5800 ?	moimoun	Nokia Base Band 5 ( BB-5 )	2	02-20-2010 13:26
t650i the battery does not charge. could anyone give a clue what can be the cause?	barchuk	Sony Ericsson Hardware Repair	0	10-14-2007 07:31
what can be the problem with optiflash, only read not write	sallu	Trident/AGERE Platform	0	06-28-2006 19:33
Read phone stops at 6% What could be the problem?	philkho	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	02-26-2001 20:36

08-31-2009, 22:10	#2 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Hello, if flash process stop always at the same % it may be problem with phone hardware, f.e. damaged or bad soldered flash chip. Also open phone and that that there is no water inside.