Lenovo A319 Problem

[Formingus]

Phone condition :
On power on just light on and nothing
After flash phone screen blank when usb connected just sound of connecting disconnecting USB
Now: Trying to flash another firmware or any other command as Factory Reset, Repair or whatever i am getting following error.
Try with battery and WO batter , connected to power supplay but allways same.

Phone Info at begin when it comes to me

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 85 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A48344732611101F176E4FF422D
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : a2G4
[eMMC] : FLASH_CID : 90014A48344732611101F176E4FF422D
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : Lenovo
ProdName : A319
ProdModel : Lenovo A319
Device : A319
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : A319_ROW_DS_S313_150427

MODEM :
BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V43_P2_1_wg_n

EXTRA :
LCD [0] : ili9806e_dsi_vdo_dijing
LCD [1] : otm8019a_dsi_vdo_dijing
LCD [2] : ili9806c_dsi_vdo_dijing
LCD Res : 800x480
TOUCH [0] : ft6206
TOUCH [1] : GT9XX
CAM [0] : ov5645_mipi_yuv
CAM [1] : gc2035_yuv
CAM [2] : hi257_yuv
MODEM : HUAQIN72_CWET_1A_KK_HSPA_MASTER_0113
LOCALE : en_US zh_CN zh_TW zh_HK ru_RU fr_FR tr_TR in_ID ms_MY vi_VN ar_EG th_TH el_GR hu_HU ro_RO cs_CZ bg_BG hr_HR sk_SK uk_UA sl_SI bn_IN sr_RS fa_IR hi_IN pt_PT

Done!
Elapsed: 00:00:12
Reconnect Power/Cable!

Before Flashing in most of case i read NVRAM and Flash just in case. Flash read failed

Start at : [10/23/2015 / 2:44:44 PM]
Operation : Read NVRAM [ v1.33 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 85 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A48344732611101F176E4FF422D
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : a2G4
[eMMC] : FLASH_CID : 90014A48344732611101F176E4FF422D
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V43_P2_1_wg_n
Read Ok, MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V43_P2_1_wg_n_e MMC.edikalcetolenovo.spnv saved

Done!
Elapsed: 00:00:54
Reconnect Power/Cable!

Finish at : [10/23/2015 / 2:45:39 PM]

Start at : [10/23/2015 / 2:46:29 PM]
Operation : Read Flash [ v1.33 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 85 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A48344732611101F176E4FF422D
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : a2G4
[eMMC] : FLASH_CID : 90014A48344732611101F176E4FF422D
[eMMC] : FLASH_EXT : 00400000/00400000
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : Lenovo
ProdName : A319
ProdModel : Lenovo A319
Device : A319
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : A319_ROW_DS_S313_150427

[Read Ok] : preloader_huaqin72_cwet_1a_kk.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
Fatal error, buffer empty! Phone connection lost???
Error while reading block! Something went wrong

Read error

Operation Failed
Elapsed: 00:03:32
Reconnect Power/Cable!

Finish at : [10/23/2015 / 2:50:01 PM]

Now only this message will get on each preformed action

Operation : Check / Read Info [ v1.33 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 107 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A48344732611101F176E4FF422D
DA Stat : v4.2 on BBID : 0x88
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00A8

Error : DA init Failed! Error code : 0x5
LErr : EMICFG_NOT_FOUND

Boot Error!

Operation Failed
Elapsed: 00:00:16
Reconnect Power/Cable!

Regards

[Formingus]

Forgot too add I Try to initialize preloader from from readed flash but still same thing

[JayDi]

Hello.
At least - rehot CPU and FlashIc.

[Formingus]

Originally Posted by JayDi

Hello.
At least - rehot CPU and FlashIc.

but this problem become after flashing,
first flash was totally ok, but reading flash failed as you can see at log
thank you

[JayDi]

I have here A319i and tested on it over 100 cycles of read-write. It work ok.

Due error and result - it indicate some HW problem. On most of memory types problems happens exactly on acess to it.

[Formingus]

Ok thanks, will try this solution
Regards