lenovo k53a48 dead after flash backup - GSM-Forum

ttggyy90 · 08-18-2017, 04:00

The phone work but unfortunately,the process com.android.phone has stopped

i did a full factory reset by CM2 and stuck on logo after reset
I did read full backup firmware and flash it back using CM2, result phone dead!

UzUnlocker · 08-18-2017, 04:56

Quote:

Originally Posted by ttggyy90

The phone work but unfortunately,the process com.android.phone has stopped

i did a full factory reset by CM2 and stuck on logo after reset
I did read full backup firmware and flash it back using CM2, result phone dead!

Check your EMMC read only state .
problem with your EMMC storage .

ttggyy90 · 08-18-2017, 05:42

only qualcomm hs-usb qualcomm hs-usb diagnostics 900e Driver cand flash or make any thing

ttggyy90 · 08-19-2017, 07:10

any one help me please

ttggyy90 · 08-19-2017, 15:57

after dead

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ...
Handshake passed!
ID_BLOCK_S : 13C70D6D

Error : Device stuck in S-EDL!
S-EDL : Reset power. Use BootJIG ( probably it is time to seek TP )

08-18-2017, 04:00	#1 (permalink)
ttggyy90 Freak Poster Join Date: Aug 2014 Posts: 204 Member: 2243628 Status: Offline Thanks Meter: 13	lenovo k53a48 dead after flash backup The phone work but unfortunately,the process com.android.phone has stopped i did a full factory reset by CM2 and stuck on logo after reset I did read full backup firmware and flash it back using CM2, result phone dead!

08-18-2017, 05:42	#3 (permalink)
ttggyy90 Freak Poster Join Date: Aug 2014 Posts: 204 Member: 2243628 Status: Offline Thanks Meter: 13	only qualcomm hs-usb qualcomm hs-usb diagnostics 900e Driver cand flash or make any thing

08-19-2017, 07:10	#4 (permalink)
ttggyy90 Freak Poster Join Date: Aug 2014 Posts: 204 Member: 2243628 Status: Offline Thanks Meter: 13	any one help me please

08-19-2017, 15:57	#5 (permalink)
ttggyy90 Freak Poster Join Date: Aug 2014 Posts: 204 Member: 2243628 Status: Offline Thanks Meter: 13	after dead 1. Power Off Phone , Remove battery , Insert back 2. PRESS and HOLD BOTH VOLUME KEYS! 3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode! Wait for phone... Device Found! Initialize ... Handshake passed! ID_BLOCK_S : 13C70D6D Error : Device stuck in S-EDL! S-EDL : Reset power. Use BootJIG ( probably it is time to seek TP )