lg ke770(Telstra) not conect with infinity

[sjni]

Originally Posted by InfinitySupport

Hello,

Is it any kind of joke or anything else ?
if you really can not understand how to make cable according to my previous explanation I strongly suggest you to learn more about wires, cables, phones and other things. In other case this job is not for you due to you will kill many phones before you will get first result.

Let me think that it just your bad joke and you just want to check how is strong our support with this kind of customers like you so I will be very patiend and here is explanation for babies (who must not repair any phone to avoid dead device):
1. look at your connector picture.
top contact is RJ45 pin-1, 2nd from top is RJ45 pin-2, 3rd from top is RJ45 pin-3 etc..., last contact for top (means first from bottom) is RJ45 pin-8.
I hope now you can understand how to calculate pins.
2. connect GND (RJ45 pin-7) to phone pin 18
3. connect RJ45 pin-2 to phone pin 12
4. connect RJ45 pin-3 to phone pin 13
Cable is ready.

Oh... I forgot one more important thing. how to calculate phone pins.
Here is instruction how to calculate it:

keyboard top
1.........18

put phone on table (if you have it) or somewhere else this way: phone connector near you. phone keyboard should be at top (this means keyboard is NOT at table, this means that phone battery is at table). Now start to calculate pins from left to right.
I hope you know where is LEFT, but anyway here is an explanation:
Here is LEFT.......................................here is RIGHT
so count pins from LEFT to RIGHT this way:
1 is here, 2 is here ---->--->---> 18 is here.

Please, confirm, is it enough clear explanation ?

Also I hope you can understand why you have ignored my previous link with detailed explanation how to build cable.

P.S.
I stronlgy suggest you to buy PinFinder adapter due to PinFinder adapter can detect pinout automatically. For sure it's the best choice for people who don't know how to build cables.

sir i flash ke770 but boot err waht i do plesesz

[abrarlove]

use pinfinder easily solve your problem lg ke 770 i have tried bro test me

[InfinitySupport]

Originally Posted by sjni

sir i flash ke770 but boot err waht i do plesesz

Hello,

Post here operation log so we will be able to check what is wrong.

[PRIMACELL]

COM3 selected
module v1.65
Device: LG-KE770
Checking data, wait...
Action: flash write
Boot ...
Press and HOLD Power button now !
s-gold2: C0
loading...
next part...
error: can't run main loader:
Finished, time used: 8 sec
Remove/Install battery now !---what is the meaning ????InfinitySupport

[virgix]

Press and HOLD Power button
till software say to release it,tested..........