Lumia 1320 RM-944 flashing failed,

[NsNobel2]

Hi support,
Phone came to me with disabled by wrong entries of security code, I tried to flash it but flashing stuck at 5% for the long time, I disconnected phone, now phone power on and goes to direct flashing mode i.e white NOKIA on upper side with red backgound,
here are info logs before flashing

Phone found!
WP10/WP8x Lumia Phone detected
Read info... Ok

=== Main info ===
NCSD Version : 3.7
Sw Version : 3058.50000.1424.0001
IMEI : 359179052584348
ProductCode : 059V7S1
ProductSN : 5039B90AB
Module Code : 0205881
=== HW info ===
Public ID : 9FACE0DA1C7156FDD18AA4B9144D8200E15D4E21
HW Version : 2000
BT Addr. : A481EE8E6A22
Wlan Mac : A481EE8EF980
Battery Level : 26 %
=== Branding and security info ===
Operator : 000-CH
SimLock : Unlocked
SimLock : 2440700000000
Country : Finland
Operator : NOKIA (Open)
Branding : RM-994_eu_euro2_1196
Sec. Mode : Restricted
Done!

Phone disconected!

here are logs of flashing

Waiting for phone...
Dead mode is selected , no phone in normal mode found
1. Press and hold "Volume Down"
2. Insert USB cable
3. Hold button until phone will be detected

Device catched in BOOT mode!
Boot Mode confirmed!
Setting Preloder
Collect Info...
Setting Application
Setting Secure
Collect Info...
=== Nokia Flash App info :
Protocol Version : 1.15
Protocol Implementation : 1.28
=== Phone Initial info :
Phone RMxxx ID : RM-994
Phone Model ID : Nokia.MSM8930.P6145.2.0
Phone Model PC : 059V7S1
Phone IMEI : 359179052584348
=== eMMC info :
eMMC Vendor : Samsung
eMMC CID : 0015
eMMC Size : 7456 MiB
=== Security Initial info :
Security Status : 010100000101
Secure Boot : Enabled
Secure eFUSE : Enabled
JTAG : Disabled
RDC Key : Not Present (Retail)
UEFI SBoot : Enabled
SecHW Key : Exists
Device RootKey : 64356634FCA08BC9E0D02C14BDB230B0076D3109
=== Other info :
SD present : False

Full Check skipped , will be checked by ImageSignature


Battery Level : 31%
RPMB Provision Status Code : 0x0101
Device RAM size : 1024 MiB
Device not have ATRP
Backup to RAM Ok!

FFU : RM994_3058.51000.1505.0012_RETAIL_apac_australia_n ew_zealand_222_12_476456_prd_signed.ffu
Flashing FFU
Sending FFU Header CertData
Header sent , accepted
Perform Data Partition Erase
Erase done
Sending FFU Payload Data...

I tried with same version and product code but no result,

I hope you will help me to overcome the issue

thanks

[JayDi]

Hello.
Uninstall all WinUSB and Nokia related drivers.
Reboot PC.
Download and install Lumia 2016 drivers from support area.
Install them.
Reboot PC.
Tick "Recovery flashing" and repeat flashing again.

[NsNobel2]

Originally Posted by JayDi

Hello.
Uninstall all WinUSB and Nokia related drivers.
Reboot PC.
Download and install Lumia 2016 drivers from support area.
Install them.
Reboot PC.
Tick "Recovery flashing" and repeat flashing again.

this one?
Drivers_Lumia_WP8x_2016-06.7z

[chandanps18]

Originally Posted by NsNobel2

this one?
Drivers_Lumia_WP8x_2016-06.7z

Yes.
You should install all the files inside the zip.