Megafon TDM 15 unlock not done

[Troyanec]

COM71 [VCP1] selected
module  v4.13
Action: read unlock codes
unlock method: read codes
Model: Megafon-TDM15
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:7118:000C
status: FF
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: TDM15MFPO3_11042011
Version: B01_MB_PCB_V2.0_091208
====================
New firmware found (v.4.13, database date: 29.01.2012): 
TDM15MFPO3_11042011

This firmware is missing in support area. If this phone is good and working:

- download latest software from support area and try again, probably this firmware already supported in latest software
- make "Read full flash" operation
- send flash backup files to support: support@infinity-box.biz or upload files to http://rapidshare.com or http://4shared.com
- include in your e-mail full text from phone back label (phone name etc.)
====================
80 byte(s) read
imei: 35306804148583
connection Ok
191 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 1122
179 byte(s) read
reading data...
972 byte(s) read
lock[1] code: + default
lock[2] code: + default
lock[3] code: + 1122
lock[4] code: - default
lock[5] code: - default
lock[6] code: + default
lock[7] code: + default
if code is not accepted by phone:
- insert wrong sim card into phone
- power-On phone
- enter code: 12345678
- wait 10 seconds
- power-Off phone via "Power" button (do not remove battery)
- read unlock codes again
Finished, time used: 31 sec
Remove/Install battery now !

[YellowBoss]

Hello,

Did you tried to unlock this phone via "smart fast" unlock method ?

[asius]

Originally Posted by YellowBoss

Hello,

Did you tried to unlock this phone via "smart fast" unlock method ?

thank you sir

COM2 [ProlificSerial0] selected
module  v4.38
Device: Megafon-TDM15
Checking data, wait...
Operation: SP-unlock
unlock method: smart fast
interface: META_DLL_v6.1108.00
Connect...
Phone should be Switched OFF !
Press and HOLD Power button now !
Connecting...
done
Release Power button now !
BaseBand chip version: MT6223, E08
ECO version:
DSP firmware version:  2000.00.00
DSP patch version: 1.0
S/W version: TDM15MFPO5_20062011
H/W board version: B01_MB_PCB_V2.0_091208
Melody version Melody V0.0
Version: TDM15MFPO5_20062011
80 byte(s) read
imei #1: 13579024681122007810
warning: imei #1 is incorrect (default factory value) !
Repair imei #1 for correct phone functionality !
191 byte(s) read
38 byte(s) read
preparing new data...
writing data...
179 byte(s) read
972 byte(s) read
preparing new data...
writing data...
verifying...
verification Ok
Shutdown...
done
Finished, time used: 29 sec
Remove/Install battery now !