Meizu M5 Note Secure Boot Remove Password Done - GSM-Forum

Xsa-Scorpion · 12-10-2017, 02:11

Remove Pass Code without Brick phone
Secure BOOT

Log before : read info

Code:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 10 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x07000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with SLA
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:05

After Inject DA in boot Floder

Read Info

Code:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 10 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x07000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with SLA
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.2016-08-12.11:17
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB1X
[eMMC] : FLASH_CID : 150100525831424D4207B648CED9B3A9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0x7F9352C5BD5B999594B1B4C371711A05
INT RAM    : 0x00040000
EXT RAM    : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Meizu
ProdName  : meizu_M5 Note
ProdModel : M5 Note
Device    : M5Note
AndroidVer: 6.0
MTKxCPU   : MT6755
MTKxPRJ   : alps-mp-m0.mp7-V2.3.1_wt6755.66.n5.m_P80

Done!
Elapsed: 00:00:23
Reconnect Power/Cable

Clear UserLocks [Pin/Pwd/Pattern/FVLock/GoogleAcc]

Code:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 10 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x07000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with SLA
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.2016-08-12.11:17
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB1X
[eMMC] : FLASH_CID : 150100525831424D4207B648CED9B3A9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0x7F9352C5BD5B999594B1B4C371711A05
INT RAM    : 0x00040000
EXT RAM    : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

LSSDB Ok!
LSSWL Ok!
LSSSH Ok!
LSSNP Ok!
LSSNG Ok!
Security Settings : Clear Ok!

[Info] : That feature NOT RESET "PRIVACY PASSWORD LOCK"! Use separate button!
[Info] : That feature NOT RESET "FRP/GoogleLOCK"! Use separate "FRP" reset!
[Info] : If phone stuck on "Logo" : 
1. Wait 2-3 minutes. Power Off phone by long press "Power" button
2. Power On phone again
3. Or wait up to 3-7 minutes, until phone start by itself
4. Also recommended reboot phone twice before start use it

Done!
Elapsed: 00:00:21

dirty_dude41 · 12-10-2017, 04:35

Quote:

Originally Posted by Xsa-Scorpion

Remove Pass Code without Brick phone
Secure BOOT

Log before : read info

Code:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 10 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x07000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with SLA
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...

[DA_ERROR] : SECURITYBOOT_BOOT_NOT_ACCEPTED
Boot Error!

Operation Failed
Elapsed: 00:00:05

After Inject DA in boot Floder

Read Info

Code:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 10 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x07000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with SLA
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.2016-08-12.11:17
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB1X
[eMMC] : FLASH_CID : 150100525831424D4207B648CED9B3A9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0x7F9352C5BD5B999594B1B4C371711A05
INT RAM    : 0x00040000
EXT RAM    : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Meizu
ProdName  : meizu_M5 Note
ProdModel : M5 Note
Device    : M5Note
AndroidVer: 6.0
MTKxCPU   : MT6755
MTKxPRJ   : alps-mp-m0.mp7-V2.3.1_wt6755.66.n5.m_P80

Done!
Elapsed: 00:00:23
Reconnect Power/Cable

Clear UserLocks [Pin/Pwd/Pattern/FVLock/GoogleAcc]

Code:

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 10 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6755
BB_CPU_NME : [MediaTek] Helio[P10]|MT6755_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x07000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : LOCKED with SLA
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.2016-08-12.11:17
Sending and initialize DA ...
DAgent configured successfully
Connection agent : PRELOADER
DRAM already initialized by Preloader
Link with DAgent established
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BMB1X
[eMMC] : FLASH_CID : 150100525831424D4207B648CED9B3A9
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x0000000747C00000
[eMMC] : FLASH_UCP : 29820 MiB [eMMC 32 GiB]
DEV RID    : 0x7F9352C5BD5B999594B1B4C371711A05
INT RAM    : 0x00040000
EXT RAM    : 0x80000000 [2 GiB]
[NAND] : FLASH : NOT INSTALLED
[UFSM] : FLASH : NOT INSTALLED
[HSUSB] : MODE : HIGH-SPEED
Boot Ok!

LSSDB Ok!
LSSWL Ok!
LSSSH Ok!
LSSNP Ok!
LSSNG Ok!
Security Settings : Clear Ok!

[Info] : That feature NOT RESET "PRIVACY PASSWORD LOCK"! Use separate button!
[Info] : That feature NOT RESET "FRP/GoogleLOCK"! Use separate "FRP" reset!
[Info] : If phone stuck on "Logo" : 
1. Wait 2-3 minutes. Power Off phone by long press "Power" button
2. Power On phone again
3. Or wait up to 3-7 minutes, until phone start by itself
4. Also recommended reboot phone twice before start use it

Done!
Elapsed: 00:00:21

nice refference sir, but where did you get enject DA boot folder??

dirty_dude41 · 12-10-2017, 04:37

nice refference sir, but where did you get enject DA boot folder??

Xsa-Scorpion · 12-10-2017, 04:57

simply in sp flash tool support flash m5 note and probably need scater file and preloader

Mr.3. · 01-23-2018, 06:09

Quote:

Originally Posted by Xsa-Scorpion

simply in sp flash tool support flash m5 note and probably need scater file and preloader

can u share the DA ,scatter and preloader please

Mubashir999 · 01-23-2018, 06:21

Quote:

Originally Posted by Xsa-Scorpion

simply in sp flash tool support flash m5 note and probably need scater file and preloader

SP Flash tool require to Flash Auth file if u have than share
tnx

Mr.3. · 01-23-2018, 06:24

Quote:

Originally Posted by Mubashir999

SP Flash tool require to Flash Auth file if u have than share
tnx

can u upload the scatter file if you have

Mubashir999 · 01-24-2018, 08:07

Quote:

Originally Posted by Mr.3.

can u upload the scatter file if you have

https://mega.nz/#F!4OoDEDBZ!RuQPBiJA...y7F_w!5DgV1DQB

LEENO · 01-24-2018, 08:54

Quote:

Originally Posted by Xsa-Scorpion

Remove Pass Code without Brick phone
Secure BOOT

After Inject DA in boot Floder

Done!
Elapsed: 00:00:21

Great
you just overwrited DA?
Please can you share DA?

tiri piri · 01-26-2018, 15:24

please share with us

malek_bh · 02-21-2018, 23:10

Please can you share DA?

hasheemkapla559 · 02-22-2018, 06:36

hello sir please share da file which you use and help the other member

Mr.3. · 02-22-2018, 08:11

here is the DA and scatter file

https://www.4shared.com/rar/DCVnddz9ei/M5_online.html

jhoelfheir · 02-22-2018, 09:42

Quote:

Originally Posted by Mr.3.

here is the DA and scatter file

https://www.4shared.com/rar/DCVnddz9ei/M5_online.html

dead link. new link

please

dave_obeal · 04-05-2018, 04:57

deadlink please. shaRE OTHER FILE .thanks

12-10-2017, 04:37	#3 (permalink)
dirty_dude41 Freak Poster Join Date: Dec 2010 Location: philippine Posts: 414 Member: 1473466 Status: Offline Thanks Meter: 90	nice refference sir, but where did you get enject DA boot folder??

12-10-2017, 04:57	#4 (permalink)
Xsa-Scorpion Insane Poster Join Date: Jan 2015 Location: morocco Posts: 82 Member: 2325587 Status: Offline Sonork: xsascorpion Thanks Meter: 38	simply in sp flash tool support flash m5 note and probably need scater file and preloader

01-26-2018, 15:24	#10 (permalink)
tiri piri No Life Poster Join Date: Jan 2003 Location: romania brasov Age: 46 Posts: 705 Member: 19672 Status: Offline Sonork: 100.65069 Thanks Meter: 46	please share with us

02-21-2018, 23:10	#11 (permalink)
malek_bh Freak Poster Join Date: Jun 2007 Location: Algerie Age: 44 Posts: 398 Member: 520327 Status: Offline Sonork: 100.1636717 Thanks Meter: 84	Please can you share DA?

02-22-2018, 06:36	#12 (permalink)
hasheemkapla559 Freak Poster Join Date: Feb 2018 Location: Zimbabwe Posts: 162 Member: 2807070 Status: Offline Sonork: 550000 Thanks Meter: 37	hello sir please share da file which you use and help the other member

02-22-2018, 08:11	#13 (permalink)
Mr.3. No Life Poster Join Date: Feb 2009 Location: CMB/Ceylon Posts: 8,096 Member: 962029 Status: Offline Sonork: OEM Lock : ON Thanks Meter: 4,127	here is the DA and scatter file https://www.4shared.com/rar/DCVnddz9ei/M5_online.html

04-05-2018, 04:57	#15 (permalink)
dave_obeal Crazy Poster Join Date: Feb 2010 Location: davao city Posts: 52 Member: 1229673 Status: Offline Sonork: 123456 Thanks Meter: 5	deadlink please. shaRE OTHER FILE .thanks