GSM-Forum - Mobicel Vivo Help

GSM-Forum (https://forum.gsmhosting.com/vbb/)

- Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)

- - Mobicel Vivo Help (https://forum.gsmhosting.com/vbb/f296/mobicel-vivo-help-2300774/)

Mobicel Vivo Help

Code:

[SCATCHECK] : Missing File : C:\Users\Yw'S\Desktop\Mobicel_Vivo_Single_SIM_MT6580_5.1\Mobicel_Vivo_Single_SIM_MT6580\Firmware\cache.img

[SCATCHECK] : Scatter wrong or incomplete. Use Factory or CM2MTK Scatter!

 Start  at : [07-12-2017 / 18:56:14]

Operation : Format FileSystem [ v1.58 ]

 1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

 Wait for phone...

Phone found! [ 59 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x0005

BLVersion : 0x00FE

PreLoader : NOT Active [ Erased ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x94

NAND Flash : NOT INSTALLED

eMMC Flash : 150100464A32374D42025EE6542AC2CF

Initialize Memory ... 

 [DA_ERROR] : DRAM Configure failed!

ErroCode : 0x2003

EMICFG_NOT_FOUND

TRY NOT HOLD VOLUME(+/-) KEYS ON CONNECT!

Boot Error!

 Operation Failed

Elapsed: 00:00:19

Reconnect Power/Cable!

 Finish at : [07-12-2017 / 18:56:33]

 Start  at : [07-12-2017 / 18:57:04]

Operation : HW Test [ v1.58 ]

 1. Power Off Phone , Remove battery , Insert back

2. Insert USB cable. In some cases require hold BootKey

 Wait for phone...

Phone found! [ 59 ]

Sync...

Inital Boot Ok!

BB_CPU_PID : 6580

BB_CPU_NME : [MediaTek] MT6580_S00

BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000

Processing BROM stage

Settings for BROM configured!

SecCfgVal : 0x00000000

BromVer   : 0x0005

BLVersion : 0x00FE

PreLoader : NOT Active [ Erased ]

BootLdrSS : NORMAL with PRELOADER

Processing DA stage

DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07

Sending and initialize DA ...

Running DA ver.4.2 on BBID : 0x94

NAND Flash : NOT INSTALLED

eMMC Flash : 150100464A32374D42025EE6542AC2CF

Initialize Memory ... 

 [DA_ERROR] : DRAM Configure failed!

ErroCode : 0x2003

EMICFG_NOT_FOUND

TRY NOT HOLD VOLUME(+/-) KEYS ON CONNECT!

Boot Error!

 Operation Failed

Elapsed: 00:00:10

Reconnect Power/Cable!

 Finish at : [07-12-2017 / 18:57:15]

tried with SP tool gettin error Dram fail.... with +/- volume same thing

Mostly this error belongs wit Hardware faults,like Emmc damaged,or flashed wit wrong preloader. Check Google about Enable Dram fail 4032 error.

It's wrong preloader fault

Quote:

Originally Posted by -Mosin- (Post 12829487)

Mostly this error belongs wit Hardware faults,like Emmc damaged,or flashed wit wrong preloader. Check Google about Enable Dram fail 4032 error.

After init preloader device work but scatter is damager not work with CM2 only in SP i use XYZ tool to flash...

Code:

Selected 0-By CPU: MT6580

 Scenario: Safe Flash

 Reinsert phone battery. 

 Battery must be charged.

 Phone must be off with battery inside. 

 Please insert USB cable now...

 Detected : MediaTek PreLoader USB VCOM Port (COM5)

 Phone detected...Please wait

 Sending DA agent, please wait...

 BaseBand CPU :MT6580_S00

 BaseBand CPU Secure Version : FF

 BaseBand CPU Bootloader Version : 01

----------------------------------------------------

 INT RAM: 128 KB SDRAM

 EXT RAM: 768 MB  DRAM

----------------------------------------------------

 EMMC: (29Gb+6144Mb) SAMSUNG 0x464a32374d42 

 EMMC FW VERSION: 02:00:00:00:00:00:00:00

 EMMC CID: 150100464A3237 : 000000000000000000

 EMMC UA SIZE: 0xe9000000      

 BOOT STYLE: EMMC BOOT

 FULL LENGTH: 0xe9880000       [3.649 GB]

 Detecting high speed port, wait......

 If driver not installed, install high speed port driver.

 If not need high speed port, disable it.

 After repeat opperation.

 Detecting high speed port, wait......

 Detected : MediaTek DA USB VCOM Port (COM21)

 Warning, flashing preloader disabled! 

 If you change android version, preloader must be flashed.

 Flash EMMC Algo Start.

 Starting flash.

 Download firmware to flash now...

 Wait untill phone will start charging.

but keeps restarting on logo tried factory reset but stiill same

You have a hour to remove that sh*t.