GSM-Forum

GSM-Forum (http://forum.gsmhosting.com/vbb/)
-   Infinity-Box (http://forum.gsmhosting.com/vbb/f296/)
-   -   moto c140 test point (http://forum.gsmhosting.com/vbb/f296/moto-c140-test-point-442927/)

shripalkawdia 09-14-2007 12:14

moto c140 test point
 
how to use test point it motorola c140 & what meen of 2 wire show in pic
i think this is direct rx & tx wire or no pls tell me in detail
thx in pic test point of c113 ok[IMG]http://img510.imageshack.us/img510/6...c123c15ee5.jpg http://img510.imageshack.us/img510/6...9175ccc7c0.jpg[/IMG]

stanner_austin 09-14-2007 14:58

.Repair dead Motorola, Panasonic (boot-core erased) w/o flash chip desoldering

Motorola C113,C115,C116,C117,C118,C139,C155,C156,V170,V171, V172,V173
Panasonic: G60

"Repair Module" allow to repair software-dead phones with erased boot-core
after empty battery or communication problem during flashing.

How to use:
1. Open phone and GENTLY cut track according to picture
NOTE !!! Track have to be restored after repair procedure,
so, cut track very gently and be sure that you can restore
track back after repair process
.

2. Start "Repair Module" software
3. Load "Repair data" file
4. Press phone "Power" button and wait until process finished (about 1 min)
5. Now phone repaired, but can't power-on
6. Restore track back
7. To make phone completely repaired you need to flash phone (Main+Flex+LP)

no words ..open eyes.open brain

InfinityHelp 09-14-2007 14:59

hello!

if your motorola c140 is not connecting in regular way you have to cut test point in place marked by red dot.
just cut the track, assemble phone and software will be able to connect.
while flashing phone set "software restore cutted track" - in this case you dont need to open phone again and restore it.

shripalkawdia 09-14-2007 15:37

but i am asking about 2 red wire
 
but i am asking about 2 red wire show i pic i meen u can see two red wire direct attach to cutted track i think this trick is direct conact handset by put rx & tx wire am i right sir
& thxxxx for reply

amitks_in 09-14-2007 15:43

MAN ???? seems u want to become more advance!

That RED wire is peice of single wire ! and u are Viewing Both the ends of wire on board! after cutting track restore boot! and u have to make jumper again so that u have working HANDSET !

Br.

Amit

CLICK HERE
to see the edited picture

InfinityHelp 09-14-2007 15:47

hello!

ignore wires. you need to cut track in place marked with red dot.
thats it

shripalkawdia 09-14-2007 15:50

ok thats it
 
ok thats it:D..:::::::

matan2 08-21-2010 08:44

i need image test point c140 motorola.
thanks.

YellowBoss 08-22-2010 12:46

Quote:

Originally Posted by matan2 (Post 6236236)
i need image test point c140 motorola.
thanks.

Hello,

Here is it:
C:\Program Files\InfinityBox\Documentation\Test_point\Moto

matan2 08-22-2010 13:49

Quote:

Originally Posted by YellowBoss (Post 6240384)
Hello,

Here is it:
C:\Program Files\InfinityBox\Documentation\Test_point\Moto

thank you ver very much.......


All times are GMT +1. The time now is 19:43.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -

Page generated in 0.22944 seconds with 5 queries

SEO by vBSEO