GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 09-26-2011, 16:46   #1 (permalink)
Banned
 
Join Date: Aug 2011
Location: India
Posts: 1,991
Member: 1642979
Status: Offline
Sonork: 100.1613407
Thanks Meter: 183
motorola wx181 unlock error


motorola wx181 unlock error

Quote:
COM69 [Serial2] selected
module v4.00
Action: read unlock codes
Model: Motorola-WX181
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:5E62:A00C
status: 01
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: MAUI.08A.W08.36.SP1.V28.F1
Version: JRD23_NEP_08A_HW
80 byte(s) read
imei: 35204604123968
connection Ok
193 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 5555
181 byte(s) read
reading data...
warning: wrong packet cs
1898 byte(s) read
warning: unknown lock version: 01000100
error: operation failed !
Finished, time used: 15 sec
Remove/Install battery now !



read flash error
Quote:
COM69 [Serial2] selected
module v4.00
Device: Motorola-WX181
Checking data, wait...
advanced flash detection enabled
Action: read flash
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:5E62:A00C
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 2088BAFFFFFFFF:2088BA00000000
flash: ST Intel std [def 003Fx010000 0008x002000] 4Mb
otp offset: 003F0000
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
921600
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [standard] type (05)
TCL-ID is present
rom info detection finished
TCL-ID detection...
TCL-ID detection done
rom info ver: 05
sw version: JRD23_NEP_08A_PCB01_GSM_MT6223_S00.MAUI_08A_W08_36 _SP1_V28_F1.BIN
project-id: MAUI.08A.W08.36.SP1.V28.F1, 00000000
code offset: 00000000
ffs offset/size [01]: 003A0000/00058000
TCL-ID identification
version: 564
provider: M181X-CAALIN1
customization: CM56AC13
customization: XM56AC13
TCL-ID identification done
rom info structure: [standard] type (05)
TCL-ID is present
ffs/eeprom address assigned: 003A0000
sec info (detailed) detection...
searching sec info#1...
search sec info#1 finished
sim-lock status: disabled
product id: JRD_COMMUNICATION_U91X_PRODUCTS
area1 is valid
area2 is valid
area3 is valid
area4 is valid
searching sec info#2...
.
search sec info#2 finished
Check firmware integrity Done
====> Check firmware content ...
Check firmware content Done
====> Backup required data ...
original imei: 00000F604485B4
reading: Motorola-WX181_JRD23_NEP_08A_PCB01_GSM_MT6223_S00.MAUI_08A_ W08_36_SP1_V28_F1__fullflash_part_1_of_1...
warning: wrong cs at 0x0009DC00, retry...
read error recovered
warning: wrong cs at 0x000FD400, retry...
warning: wrong cs at 0x000FD400, retry...
warning: wrong cs at 0x000FD400, retry...
warning: wrong cs at 0x000FD400, retry...
warning: wrong cs at 0x000FD400, retry...
warning: wrong cs at 0x000FD400, retry...
warning: wrong cs at 0x000FD400, retry...
warning: wrong cs at 0x000FD400, retry...
warning: wrong cs at 0x000FD400, retry...
error: too many retries during read operation
Probably errors exist during flash read operation.
Do you want to repeat read operation ?
error: wrong answer: E3
Probably errors exist during flash read operation.
Do you want to repeat read operation ?
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
warning: wrong cs at 0x00000000, retry...
error: too many retries during read operation
Probably errors exist during flash read operation.
Do you want to repeat read operation ?
aborted by user
error: can not make full backup
file saved: c:\InfinityBox\MModule\backup_security\Motorola-WX181_JRD23_NEP_08A_PCB01_GSM_MT6223_S00.MAUI_08A_ W08_36_SP1_V28_F1__system_log__00000000_20110926-211402.B0X.bin
Finished, time used: 1 min 38 sec
Remove/Install battery now !
  Reply With Quote
Old 09-26-2011, 16:49   #2 (permalink)
Banned
 
Join Date: Aug 2011
Location: India
Posts: 1,991
Member: 1642979
Status: Offline
Sonork: 100.1613407
Thanks Meter: 183
read full deatilssssssssssssss



Quote:
COM69 [Serial2] selected
module v4.00
Device: Motorola-WX181
Checking data, wait...
advanced flash detection enabled
Action: read/check information
====> Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:5E62:A00C
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
====> Initialize ...
detecting chip #00 in region #00...
flash: 2088BAFFFFFFFF:2088BA00000000
flash: ST Intel std [def 003Fx010000 0008x002000] 4Mb
otp offset: 003F0000
number of flash chip/regions detected: 01/01
Initialize Done
====> Set baud ...
921600
Set baud Done
====> Initialize bootcode ...
Initialize bootcode Done
====> Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [standard] type (05)
TCL-ID is present
rom info detection finished
TCL-ID detection...
TCL-ID detection done
rom info ver: 05
sw version: JRD23_NEP_08A_PCB01_GSM_MT6223_S00.MAUI_08A_W08_36 _SP1_V28_F1.BIN
project-id: MAUI.08A.W08.36.SP1.V28.F1, 00000000
code offset: 00000000
ffs offset/size [01]: 003A0000/00058000
TCL-ID identification
version: 564
provider: M181X-CAALIN1
customization: CM56AC13
customization: XM56AC13
TCL-ID identification done
rom info structure: [standard] type (05)
TCL-ID is present
ffs/eeprom address assigned: 003A0000
sec info (detailed) detection...
searching sec info#1...
search sec info#1 finished
sim-lock status: disabled
product id: JRD_COMMUNICATION_U91X_PRODUCTS
area1 is valid
area2 is valid
area3 is valid
area4 is valid
searching sec info#2...
.
search sec info#2 finished
detecting firmware version...
firmware version: JRD23_NEP_08A_PCB01_GSM_MT6223_S00.MAUI_08A_W08_36 _SP1_V28_F1.BIN
detecting firmware build...
.........
firmware date/time: 2010-04-21 18-51
hw1: JRD23_NEP_08A_HW
hw2: 08A_JRD23_NEP_08A
done
detecting product-id...
product-id: U91X
detecting languages...
...........
language parameters detected
detected languages: En Hi
original imei: 00000F604485B4
file saved: c:\InfinityBox\MModule\backup_security\Motorola-WX181_JRD23_NEP_08A_PCB01_GSM_MT6223_S00.MAUI_08A_ W08_36_SP1_V28_F1__system_log__00000000_20110926-211811.B0X.bin
Finished, time used: 49 sec
Remove/Install battery now !
  Reply With Quote
Old 09-26-2011, 16:55   #3 (permalink)
No Life Poster
 
Haicha's Avatar
 
Join Date: Aug 2006
Location: Free Palestine
Posts: 31,801
Member: 330579
Status: Offline
Thanks Meter: 67,512
Cable you use for unlock? Is Alcatel S320 Datacable?
If not use this.
Regards
  Reply With Quote
Old 09-26-2011, 17:04   #4 (permalink)
Banned
 
Join Date: Aug 2011
Location: India
Posts: 1,991
Member: 1642979
Status: Offline
Sonork: 100.1613407
Thanks Meter: 183
i can use rt tx



not data cable



rx tx via avator booxx



if this phone unlock via usb plz tell me pinout for usb
  Reply With Quote
Old 09-27-2011, 16:05   #5 (permalink)
Product Manager
 
Join Date: Mar 2005
Location: infinity-box
Posts: 38,635
Member: 130995
Status: Offline
Thanks Meter: 35,229
Quote:
Originally Posted by anil.prajapati View Post
i can use rt tx



not data cable



rx tx via avator booxx



if this phone unlock via usb plz tell me pinout for usb
You must use RX/TX/GND cable.


Here is an instruction how to get cable/pinout information:
1. be sure that you have downloaded and installed latest Infinity-Box Pinouts update: Infinity-Box - News - 26-09-2011 - Web site updated
2. run Infinity-Box Shell
3. select required model
4. see detailed information about cable/pinout (Rx/Tx/Gnd pins and other information)

Here is an example of information given by Infinity-Box Shell.
It's just an example for Alcatel, if you have another model you must select your model !



RJ45 connector pinout:


Here is an information how to build your own cable: FAQ: Frequently Asked Questions, cables/pinouts
  Reply With Quote
Old 09-28-2011, 05:36   #6 (permalink)
Banned
 
Join Date: Aug 2011
Location: India
Posts: 1,991
Member: 1642979
Status: Offline
Sonork: 100.1613407
Thanks Meter: 183
wx181 unlocking eroor

wx181 unlocking eroor

Quote:
COM69 [Serial2] selected
module v4.00
Action: read unlock codes
Model: Motorola-WX181
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
Initializing [6223:8A05:8A00]...
CPU: MT6223
high speed boot On
chip: 0011:5E62:A00C
status: 01
Connecting at 19200, wait...
Release Power button now !
Phone detected, wait...
Hardware: MT6223,E05
Date: 2000.00.00
Version: 1.0
Version: MAUI.08A.W08.36.SP1.V28.F1
Version: JRD23_NEP_08A_HW
80 byte(s) read
imei: 35204604123968
connection Ok
193 byte(s) read
38 byte(s) read
Phone lock: Off
Phone code: 5555
181 byte(s) read
reading data...
warning: wrong packet cs
1898 byte(s) read
warning: unknown lock version: 01000100
error: operation failed !
Finished, time used: 15 sec
Remove/Install battery now !
  Reply With Quote
Old 09-28-2011, 14:16   #7 (permalink)
No Life Poster
 
Maik_TechService's Avatar
 
Join Date: Aug 2008
Location: Côte d'Ivoire_Ghana_Nigeria
Age: 40
Posts: 1,067
Member: 846968
Status: Offline
Sonork: 100.1613167
Thanks Meter: 139
rewrite IMEI BEFORE DO UNLOCK AND MAKE SURE THAT YOU BATERIE IS VERRRRYYY FULLLLL BRO
BR
ZEMICA
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
Unlocking 5190 Ryu Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 23 01-07-2018 17:14
$50 Reward for unlocking my 6150!!! TheDon Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 5 03-23-2015 14:21
where to find a working program all they have some errors ?? fondas Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 2 12-12-2012 13:26

 



All times are GMT +1. The time now is 12:27.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.18518 seconds with 9 queries

SEO by vBSEO