motorola xt1585 frp 7.0 remove error ??/??

[unlock143]

Operation : Identify [ v1.02 ]
Waiting for device in fastboot mode ...
1. Power off device. Press and hold 'VOL DOWN' button
2. Insert USB cable, hold button until device will be found!
Connect Ok!
Main Info ============
CPU : MSM8994
CID : 0x0002
IMEI : 990005741130174
UID : 7A6C32021B000000000000000000

Model Info ============
DevModel : MOTXT1585
IntName : kinzie

SW Info ============
DevSWVer : Blur_Version.25.216.2.kinzie_verizon.verizon.en.US
DevQCVer : <not found>
BaseBand : M8994_13206.84.03.43R KINZIE_VZW_CUST
BootLDRv : moto-msm8994-A8.63

HW Info ============
eMMCInfo : 32GB Toshiba REV=07 PRV=00 TYPE=57 PNM=032G72
DRAMInfo : 3072MB SK Hynix S16 SDRAM DIE=6Gb M5=x6 M6=x3 M7=x0 M8=x4

Lock Info ============
BLUnlock : no
WarrantyVoid : no
FRP Lock : protected (77)

Done!
Elapsed: 00:00:07

Operation : Enable ADB (Moto) [ v1.02 ]
Waiting for NetInterface arrival ...
1. Power off device. Press and hold 'VOL DOWN' and 'POWER ON' buttons
2. Select by 'VOL DOWN' or 'VOL UP' FACTORY MODE , press 'POWER ON'
3. Connect USB cable, when device boot complete!
Connect Ok!
Waiting ...
Trying link with : 192.168.137.2
Connected to device!
Device : MOTXT1585
VerInfo : KINZIE_VZW_CUST
Version : Blur_Version.25.216.2.kinzie_verizon.verizon.en.US
Enabling ADB ...

1. Disconnect cable from device, press and hold 'VOLUME_DOWN' and 'POWER_ON'
2. Select 'FACTORY MODE' and press 'POWER ON'!
3. Wait for device boot completely!

Done!
Elapsed: 00:00:42