MPEG4 (P888) pinouts needed - GSM-Forum

zeerik · 07-15-2008, 15:42

hi
i have mpeg4 dual cpu .....its jack is broken ......i need its on board pinouts.....please

InfinityHelp · 07-15-2008, 20:50

hello!

connector type was 12pin?

zeerik · 07-16-2008, 03:59

yes it is 1x12 conecter and here is pics

debmobile · 07-16-2008, 06:43

Try This:-mpeg4>>>>>>>>>>rx:6 @ Tx:5 @ Gnd:4

PRIMACELL · 07-20-2008, 07:03

Quote:

Originally Posted by zeerik

yes it is 1x12 conecter and here is pics

ON THE PCB NEAR 1st SIM

1 =
2 = TX
3 = GND
4 =
5 = RX
6 =

naushad.g · 10-05-2008, 15:05

Quote:

Originally Posted by PRIMACELL

ON THE PCB NEAR 1st SIM

1 =
2 = TX
3 = GND
4 =
5 = RX
6 =

no this is not work pls give a org pin find

InfinityHelp · 10-05-2008, 20:21

hello mr. naushad.g!

please post your phone PCB picture

07-15-2008, 15:42	#1 (permalink)
zeerik No Life Poster Join Date: May 2006 Location: Sambrial (Sialkot) Posts: 2,695 Member: 282066 Status: Online Sonork: 100.1590696 Thanks Meter: 569	MPEG4 (P888) pinouts needed hi i have mpeg4 dual cpu .....its jack is broken ......i need its on board pinouts.....please

07-15-2008, 20:50	#2 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello! connector type was 12pin?

07-16-2008, 06:43	#4 (permalink)
debmobile No Life Poster Join Date: May 2008 Location: COME & MADE GREEN WORLD Posts: 3,092 Member: 771937 Status: Offline Sonork: 100.1605717 Thanks Meter: 1,052	Try This:-mpeg4>>>>>>>>>>rx:6 @ Tx:5 @ Gnd:4

10-05-2008, 20:21	#7 (permalink)
InfinityHelp Product Supporter Join Date: May 2005 Location: uae Posts: 29,245 Member: 148515 Status: Offline Thanks Meter: 19,534	hello mr. naushad.g! please post your phone PCB picture