MSM8996 & UFS & MemoryTool - GSM-Forum

JayDi · 05-21-2017, 10:48

Flash factory FW :

Code:

Loading firmware ... 
Loading 6 program definition file(s) ... 
Load Ok!

Operation : Flash [ v1.12 ]
ForceFlashing : Disabled

Verify FW package ... 
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 820 [MSM8996]
ID_BLOCK_S : B861DCBB
ID_BLOCK_I : 009470E1
ID_BLOCK_E : 2A703DB9
ID_BLOCK_L : C4CF6F2386EC1D32B0AF58AB5E37F2A3
ID_BLOCK_L : 527BBE85A099E0CC4DA13129613BB67A
Pickup loader from firmware package
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00001000
UFS Device   : SAMSUNG KLUCG4J1CB-B0B1 0800
UFS SectSize : 0x1000
UFS LU0 Size : 0x00000007602F0000 : 29,50 GiB
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!

Flash Chain : 74
Flashing now

Flashing : persist.img
Flashing : cache.img
Flashing : devcfg.mbn
Flashing : devcfg.mbn
Flashing : dynamic_nvbk.bin
Flashing : reserve1.bin
Flashing : reserve2.bin
Flashing : config.bin
Flashing : userdata.img
Flashing : gpt_main0.bin
Flashing : gpt_backup0.bin
Flashing : xbl.elf
Flashing : gpt_main1.bin
Flashing : gpt_backup1.bin
Flashing : xbl.elf
Flashing : gpt_main2.bin
Flashing : gpt_backup2.bin
Flashing : gpt_main3.bin
Flashing : gpt_backup3.bin
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : hyp.mbn
Flashing : hyp.mbn
Flashing : sec.dat
Flashing : pmic.elf
Flashing : pmic.elf
Flashing : NON-HLOS.bin
Flashing : adspso.bin
Flashing : mdtp.img
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : logo.bin
Flashing : boot.img
Flashing : boot_aging.img
Flashing : system.img
Flashing : recovery.img
Flashing : BTFM.bin
Flashing : keymaster.mbn
Flashing : keymaster.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib64.mbn
Flashing : cmnlib64.mbn
Flashing : apdp.mbn
Flashing : msadp.mbn
Flashing : gpt_main4.bin
Flashing : gpt_backup4.bin
Flashing : md5.img
Flashing : gpt_main5.bin
Flashing : gpt_backup5.bin

Flash sequence completed!

Applying patches for storage # 0
Records : 26
Applying patches for storage # 1
Records : 26
Applying patches for storage # 2
Records : 26
Applying patches for storage # 3
Records : 26
Applying patches for storage # 4
Records : 26
Applying patches for storage # 5
Records : 26
Patch sequence completed!

Boot settings configured!

Flashing done!

Done!
Elapsed: 00:07:23

Reconnect Power/Cable!

Flash Infinity FW :

Code:

Loading firmware ... 
Created by Infinity-Box (c) Chinese Miracle II (c) 2017

Device Brand    : OnePlus
Device Manufact.: OnePlus
Device Model    : OnePlus3
Device CPU      : MSM8996
Device Version  : 7.1.1
SWVersion       : OnePlus3Oxygen_16.A.51_GLO_051_1704112009
CU_SWVer        : OnePlus
Device Compile  : 11.04.2017 12:01:30
Load Ok!

Operation : Flash [ v1.12 ]
ForceFlashing : Disabled

Verify FW package ... 
Verification passed!

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 820 [MSM8996]
ID_BLOCK_S : B861DCBB
ID_BLOCK_I : 009470E1
ID_BLOCK_E : 2A703DB9
ID_BLOCK_L : C4CF6F2386EC1D32B0AF58AB5E37F2A3
ID_BLOCK_L : 527BBE85A099E0CC4DA13129613BB67A
Pickup loader from firmware package
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00001000
UFS Device   : SAMSUNG KLUCG4J1CB-B0B1 0800
UFS SectSize : 0x1000
UFS LU0 Size : 0x00000007602F0000 : 29,50 GiB
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!

Flash Chain : 70
Flashing now

Flashing : gpt_main0.bin
Flashing : persist.img
Flashing : cache.img
Flashing : misc.img
Flashing : devcfg.mbn
Flashing : devcfg.mbn
Flashing : userdata.img
Flashing : gpt_backup0.bin
Flashing : gpt_main1.bin
Flashing : xbl.elf
Flashing : gpt_backup1.bin
Flashing : gpt_main2.bin
Flashing : xbl.elf
Flashing : gpt_backup2.bin
Flashing : gpt_main3.bin
Flashing : gpt_backup3.bin
Flashing : gpt_main4.bin
Flashing : rpm.mbn
Flashing : rpm.mbn
Flashing : tz.mbn
Flashing : tz.mbn
Flashing : hyp.mbn
Flashing : hyp.mbn
Flashing : sec.dat
Flashing : pmic.bin
Flashing : pmic.bin
Flashing : NON-HLOS.bin
Flashing : adspso.bin
Flashing : mdtp.img
Flashing : emmc_appsboot.mbn
Flashing : emmc_appsboot.mbn
Flashing : lsplash.img
Flashing : boot.img
Flashing : boot_ag.img
Flashing : system.img
Flashing : recovery.img
Flashing : btfm.mbn
Flashing : keymaster.mbn
Flashing : keymaster.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib.mbn
Flashing : cmnlib64.mbn
Flashing : cmnlib64.mbn
Flashing : ap.mbn
Flashing : gpt_backup4.bin
Flashing : gpt_main5.bin
Flashing : md5.img
Flashing : gpt_backup5.bin
Wipe data ... 

Boot settings configured!

Flashing done!

Done!
Elapsed: 00:04:50

Reconnect Power/Cable!

Read Infinity FW :

Code:

Operation : Read Flash [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 820 [MSM8996]
ID_BLOCK_S : B861DCBB
ID_BLOCK_I : 009470E1
ID_BLOCK_E : 2A703DB9
ID_BLOCK_L : C4CF6F2386EC1D32B0AF58AB5E37F2A3
ID_BLOCK_L : 527BBE85A099E0CC4DA13129613BB67A
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : UFS , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00001000
UFS Device   : SAMSUNG KLUCG4J1CB-B0B1 0800
UFS SectSize : 0x1000
UFS LU0 Size : 0x00000007602F0000 : 29,50 GiB
--------------UFS Device Info--------------
UFS Total Active LU: 0x6
UFS wManufacturerID: 0x1ce
UFS Boot Partition Enabled: 0x1
UFS LU Write Protect: 0x0
UFS Boot LUN ID: = 0x0
UFS Memory Type: 0x0
UFS LU Total Blocks: 0x0
UFS Supported Memory Types: 0x800f
UFS LUN Enable Bitmask: 0x3f
UFS bConfigDescrLock: 0x0
Boot Ok!


Brand     : OnePlus
Device    : OnePlus3
AndroidVer: 7.1.1
SWVersion : OnePlus3Oxygen_16.A.51_GLO_051_1704112009
Manufact. : OnePlus
QLMxCPU   : MSM8996

DevInfo : MSM8996__OnePlus__OnePlus__ANDR_v7.1.1__OnePlus3__OnePlus3Oxygen_16.A.51_GLO_051_1704112009

Reading Flash Content ... 
[Read Ok] : gpt_main0.bin
[Read Ok] : persist.img
[Read Ok] : cache.img
[Read Ok] : misc.img
[Read Ok] : devcfg.mbn
[Read Ok] : pnvbak.img
[Read Ok] : param.cfg
[Read Ok] : userdata.img
[Read Ok] : gpt_backup0.bin
[Read Ok] : gpt_main1.bin
[Read Ok] : xbl.elf
[Read Ok] : gpt_backup1.bin
[Read Ok] : gpt_main2.bin
[Read Ok] : gpt_backup2.bin
[Read Ok] : gpt_main3.bin
[Read Ok] : ddr.bin
[Read Ok] : gpt_backup3.bin
[Read Ok] : gpt_main4.bin
[Read Ok] : rpm.mbn
[Read Ok] : tz.mbn
[Read Ok] : hyp.mbn
[Read Ok] : sec.dat
[Read Ok] : pmic.bin
[Read Ok] : NON-HLOS.bin
[Read Ok] : adspso.bin
[Read Ok] : mdtp.img
[Read Ok] : emmc_appsboot.mbn
[Read Ok] : lsplash.img
[Read Ok] : boot.img
[Read Ok] : boot_ag.img
[Read Ok] : system.img
[Read Ok] : recovery.img
[Read Ok] : btfm.mbn
[Read Ok] : keymaster.mbn
[Read Ok] : cmnlib.mbn
[Read Ok] : cmnlib64.mbn
[Read Ok] : ap.mbn
[Read Ok] : gpt_backup4.bin
[Read Ok] : gpt_main5.bin
[Read Ok] : md5.img
[Read Ok] : gpt_backup5.bin

Android Info saved!
Read finished!
Configuration : MSM8996 / UFS
Firmware Size : 3343 MiB

Done!
Elapsed: 00:05:12

Reconnect Power/Cable!

Reset FRP and rest things are supported as well
Xiaomi, OnePlus, Lenovo and rest generic types.

Complete MemoryTool Support for UFS :

More interest stuff on way

hitech care · 05-21-2017, 11:05

Great I Was Waiting For UFS Support.Same Phone I Was Testing Before One+ 3 OS 7.1.1.(Unsupported Before). :-) Great keep It Up
Brother Can I Get Your Contact Info Skype Or Yahoo ....As My Inbox Almost Full Always...

soharwardian · 05-21-2017, 11:38

Thanks and Great...
i have lg g5 with MSM8996 and UFS
its just have fastboot mode .....nothing other , no download mode nor recovery and not boot into system.....is this help me plz guide.....my problem is here
http://forum.gsmhosting.com/vbb/f799...creen-2226340/

JayDi · 05-21-2017, 11:45

Quote:

Originally Posted by soharwardian

Thanks and Great...
i have lg g5 with MSM8996 and UFS
its just have fastboot mode .....nothing other , no download mode nor recovery and not boot into system.....is this help me plz guide.....my problem is here
http://forum.gsmhosting.com/vbb/f799...creen-2226340/

I mostly sure that LG have SecureBoot, which paired to it ID, that one is not supported yet. Such models can be supported only one by one.

JorgeVla · 05-21-2017, 19:41

One Plus 3 A3000 not supported?

Code:

Infinity-Box Chinese Miracle Qualcomm Module [QLM] v 1.12


Operation : Identify [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 821 [MSM8996 Pro]
ID_BLOCK_S : BC3AF62C
ID_BLOCK_I : 0005F0E1
ID_BLOCK_E : 2A703DB9
ID_BLOCK_L : B5BC1C52F59D92A3013C293CD14663D2
ID_BLOCK_L : 7B5C99AC87B0DBE5A47E08025AE26F53
Use CM2 Internal Loader
Loader Sent! Initializing ... 
Running FireHose on BBID : MSM8996 , FLASH : eMMC , mVER : 1
ExtInfo : 0x0000C000/0000C000/00001000/00001000/00000200
Boot Ok!


Error : Failed to read initial info! Erased/Damaged device???
Check cable, connection and drivers!

Reconnect Power/Cable!

Only want FRP

JorgeVla · 05-21-2017, 19:54

Its not working even with Factory FW

Code:

Operation : Identify [ v1.12 ]

1. Power Off Phone , Remove battery , Insert back
2. PRESS and HOLD BOTH VOLUME KEYS!
3. Insert USB cable. In some cases require use EDL cable or TP to force EDL mode!

Wait for phone...
Device Found!
Initialize ... 
Handshake passed!
BB_IDC_CPU : SnapDragon 821 [MSM8996 Pro]
ID_BLOCK_S : BC3AF62C
ID_BLOCK_I : 0005F0E1
ID_BLOCK_E : 2A703DB9
ID_BLOCK_L : B5BC1C52F59D92A3013C293CD14663D2
ID_BLOCK_L : 7B5C99AC87B0DBE5A47E08025AE26F53
Pickup loader from firmware package
FH_LOAD_CODE : 14

Error : Loader send failed!
Check cable, connection and drivers!

Reconnect Power/Cable!

MDxavi · 05-21-2017, 22:23

Great work sir ayDi

one question

what is UFS

THANKS IN ADVANCE

JorgeVla · 05-22-2017, 02:30

Phone was One Plus 3T, it was my failt, sorry

JayDi · 05-22-2017, 03:44

Quote:

Originally Posted by JorgeVla

Phone was One Plus 3T, it was my failt, sorry

Hello.
If you have free time, and phone on hands - we can try some test. PM me for details.

MDxavi · 05-22-2017, 09:04

Quote:

Originally Posted by MDxavi

Great work sir ayDi

one question

what is UFS

THANKS IN ADVANCE

after some research

UFS (Universal Flash Storage)

new type of EMMC (UFS 2.0 NAND)

adfd · 05-27-2017, 09:51

why you use memory tool explain me..............

Kirumira · 05-27-2017, 10:55

Quote:

Originally Posted by adfd

why you use memory tool explain me..............

Your Answer is here http://forum.gsmhosting.com/vbb/f296...anual-2179982/

05-21-2017, 11:05	#2 (permalink)
hitech care No Life Poster Join Date: Nov 2012 Location: Ek India Happy Wala.. :-) Posts: 2,828 Member: 1834832 Status: Offline Thanks Meter: 1,450	Great I Was Waiting For UFS Support.Same Phone I Was Testing Before One+ 3 OS 7.1.1.(Unsupported Before). :-) Great keep It Up Brother Can I Get Your Contact Info Skype Or Yahoo ....As My Inbox Almost Full Always... Last edited by hitech care; 05-21-2017 at 11:13.

05-21-2017, 11:38	#3 (permalink)
soharwardian Insane Poster Join Date: Mar 2012 Location: pakistan, islamabad/lahore Posts: 80 Member: 1729557 Status: Offline Sonork: 100.1677910 Thanks Meter: 5	Thanks and Great... i have lg g5 with MSM8996 and UFS its just have fastboot mode .....nothing other , no download mode nor recovery and not boot into system.....is this help me plz guide.....my problem is here http://forum.gsmhosting.com/vbb/f799...creen-2226340/

05-21-2017, 22:23	#7 (permalink)
MDxavi Freak Poster Join Date: Feb 2013 Location: algeria Posts: 328 Member: 1882912 Status: Offline Sonork: 100.1677703 Thanks Meter: 263	Great work sir ayDi one question what is UFS THANKS IN ADVANCE

05-22-2017, 02:30	#8 (permalink)
JorgeVla No Life Poster Join Date: Feb 2010 Posts: 605 Member: 1228709 Status: Offline Thanks Meter: 268	Phone was One Plus 3T, it was my failt, sorry

05-27-2017, 09:51	#11 (permalink)
adfd No Life Poster Join Date: Jul 2013 Location: Nepal,kathmandu Posts: 981 Member: 1988630 Status: Offline Sonork: 100.1684003 Thanks Meter: 312	why you use memory tool explain me..............