MT6571 ALPS.KK1.MP7.V1 4.4.2 Need Rom - GSM-Forum

said4 · 06-24-2016, 12:41

Dear
Need rom for this one
phone Hang on Logo

Code:

Card found : S/N : 334FA6A3 , v0130
Chinese Miracle II  [MTK module] v 1.51

Operation : Check / Read Info [ v1.51 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 10 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6571
BB_CPU_NME : [MediaTek] MT6571_S00
BB_CPU_EXT : 0xCA00 , 0x8D00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8B
NAND Flash : NOT INSTALLED
eMMC Flash : 1101003030344739305161CA32605171
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 1101003030344739305161CA32605171
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0x4B1992B1D294A67B98EDF619C3B4D312
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Tinno
ProdName  : s3600ap_emmc
ProdModel : S3600AP
Device    : s3600ap_emmc
AndroidVer: 4.4.2
MTKxCPU   : MT6571
MTKxPRJ   : ALPS.KK1.MP7.V1

Done!
Elapsed: 00:00:26
Reconnect Power/Cable!

rezakeshavarza · 09-23-2016, 19:30

i need this rom too......................???????

Siroartz · 01-14-2019, 07:56

Quote:

Originally Posted by said4

Dear
Need rom for this one
phone Hang on Logo

Code:

Card found : S/N : 334FA6A3 , v0130
Chinese Miracle II  [MTK module] v 1.51

Operation : Check / Read Info [ v1.51 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 10 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6571
BB_CPU_NME : [MediaTek] MT6571_S00
BB_CPU_EXT : 0xCA00 , 0x8D00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer   : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with SPRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1620.10.01
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x8B
NAND Flash : NOT INSTALLED
eMMC Flash : 1101003030344739305161CA32605171
Initialize Memory ... 
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x11 , OEM : 0100
[eMMC] : FLASH_INF : [TOSHIBA] , 09G40
[eMMC] : FLASH_CID : 1101003030344739305161CA32605171
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000EC000000
[eMMC] : FLASH_UCP : 3776 MiB [eMMC 4 GiB]
DEV RID    : 0x4B1992B1D294A67B98EDF619C3B4D312
INT RAM    : 0x00020000
EXT RAM    : 0x20000000 [512 MiB]
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Tinno
ProdName  : s3600ap_emmc
ProdModel : S3600AP
Device    : s3600ap_emmc
AndroidVer: 4.4.2
MTKxCPU   : MT6571
MTKxPRJ   : ALPS.KK1.MP7.V1

Done!
Elapsed: 00:00:26
Reconnect Power/Cable!

THIS compatible Flash only ANDROID USERDATA and CACHE
https://pusatgamepedia.********.com/...stock-rom.html

ALSO
SAME ROM AS
ENET E5 FLASH FILE FIRMWARE MT6571

09-23-2016, 19:30	#2 (permalink)
rezakeshavarza Freak Poster Join Date: Oct 2013 Location: tehran Age: 37 Posts: 273 Member: 2048880 Status: Offline Thanks Meter: 63	i need this rom too......................???????