mt6572 read factry file ok but there is no scatter file - GSM-Forum

sanyomobile · 05-02-2015, 08:19

mt6572 read factry file ok but there is no scatter file

how to flash now beacuse i flash other file now phone dead

JayDi · 05-02-2015, 08:39

Because read not done. All explained in logs. Where they?

sanyomobile · 05-02-2015, 08:47

i close software no log

JayDi · 05-02-2015, 08:50

All saved in "Operation.log" file. Check it and post log.

sanyomobile · 05-02-2015, 09:07

Operation : Read Flash [ v1.18 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 43 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 45010053454D3034472825680927511B
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : G40ME
[eMMC] : FLASH_CID : 45010053454D3034472825680927511B
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : samsung
ProdName : lenovo72_we_jb3
ProdModel : GT-S7582
Device : lenovo72_we_jb3
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1

[Read Ok] : preloader_lenovo72_we_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Error] : Bad EXT data
Looks like unusable file , break!

Read Ok , collect info
Brand : samsung
ProdName : lenovo72_we_jb3
ProdModel : GT-S7582
Device : lenovo72_we_jb3
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1
File conversion error, file already exists! Saved as default!

Done!
Elapsed: 00:05:33
Reconnect Power/Cable!

sanyomobile · 05-02-2015, 09:09

now what to do how to write this file

JayDi · 05-02-2015, 09:12

You can't write it, because :

Code:

[Read Error] : Bad EXT data
Looks like unusable file , break!

Solution for repair without factory file will be released soon , mostly finished. For now - seek working phone and read fw from it, or seek factory file.

sanyomobile · 05-02-2015, 09:16

Brand : samsung
ProdName : lenovo72_we_jb3
ProdModel : GT-S7582
Device : lenovo72_we_jb3
AndroidVer: 4.2.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.JB3.MP.V1

i have same file read but it says

ScatCFG : BaseBand : MT6572 , Project : kingsung72_wet_lca , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify : Enabled

SecCfg Passed , 1799
BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : eMMC NOT supported by BootLoader!
[BL_ERROR] : STORAGE : Break Flashing! This Firmware will kill phone!

JayDi · 05-02-2015, 09:20

It doesnt want to kill your phone. If you flash this fw with SPFT - phone will die. But, anyway - you can try do it, if really want.

sanyomobile · 05-02-2015, 09:29

ok phone already dead with this file flash bya other box

05-02-2015, 08:19	#1 (permalink)
sanyomobile No Life Poster Join Date: Oct 2012 Posts: 1,436 Member: 1824929 Status: Offline Thanks Meter: 99	mt6572 read factry file ok but there is no scatter file mt6572 read factry file ok but there is no scatter file how to flash now beacuse i flash other file now phone dead

05-02-2015, 09:12	#7 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	You can't write it, because : Code: [Read Error] : Bad EXT data Looks like unusable file , break! Solution for repair without factory file will be released soon , mostly finished. For now - seek working phone and read fw from it, or seek factory file.

05-02-2015, 08:39	#2 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	Because read not done. All explained in logs. Where they?

05-02-2015, 08:47	#3 (permalink)
sanyomobile No Life Poster Join Date: Oct 2012 Posts: 1,436 Member: 1824929 Status: Offline Thanks Meter: 99	i close software no log

05-02-2015, 08:50	#4 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	All saved in "Operation.log" file. Check it and post log.

05-02-2015, 09:07	#5 (permalink)
sanyomobile No Life Poster Join Date: Oct 2012 Posts: 1,436 Member: 1824929 Status: Offline Thanks Meter: 99	Operation : Read Flash [ v1.18 ] 1. Power Off Phone , Remove battery , Insert back 2. Insert USB cable. In some cases require hold BootKey Wait for phone... Phone found! [ 43 ] Sync... Inital regs read done Boot Info : BB_CPU_ID : 6572 BB_CPU_HW : CA01 BB_CPU_SW : 8A00 BB_CPU_SB : 0000 BB_CPU_NM : [MediaTek] MT6572_S00 Processing BROM stage BLVersion : 0x01 SecCfgVal : 0x00000000 BromVersion : 0xFF BLVersion : 0x01 Preloader Status : Alive Processing DA stage DA Select done , sending NAND_ID : 00000000000000000000000000000000 eMMC_ID : 45010053454D3034472825680927511B DA Stat : v4.2 on BBID : 0x88 DA Sent. Configure setting now ... DA started successuflly eMMC FlashIC initialized [eMMC] : FLASH_VEN : 0045 , OEM : 0100 [eMMC] : FLASH_INF : G40ME [eMMC] : FLASH_CID : 45010053454D3034472825680927511B [eMMC] : FLASH_LEN : 0x00000000EC000000 INT RAM : 0x00020000 EXT RAM : 0x20000000 BOOT TYPE : EMMC_FLASH_BOOT SOC VERIFY : C1 Boot Ok! Reading Flash Conent now ... Brand : samsung ProdName : lenovo72_we_jb3 ProdModel : GT-S7582 Device : lenovo72_we_jb3 AndroidVer: 4.2.2 MTKxCPU : MT6572 MTKxPRJ : ALPS.JB3.MP.V1 [Read Ok] : preloader_lenovo72_we_jb3.bin [Read Ok] : MBR [Read Ok] : EBR1 [Read Ok] : lk.bin [Read Ok] : boot.img [Read Ok] : recovery.img [Read Ok] : secro.img [Read Ok] : logo.bin [Read Ok] : system.img [Read Ok] : cache.img [Read Error] : Bad EXT data Looks like unusable file , break! Read Ok , collect info Brand : samsung ProdName : lenovo72_we_jb3 ProdModel : GT-S7582 Device : lenovo72_we_jb3 AndroidVer: 4.2.2 MTKxCPU : MT6572 MTKxPRJ : ALPS.JB3.MP.V1 File conversion error, file already exists! Saved as default! Done! Elapsed: 00:05:33 Reconnect Power/Cable!

05-02-2015, 09:09	#6 (permalink)
sanyomobile No Life Poster Join Date: Oct 2012 Posts: 1,436 Member: 1824929 Status: Offline Thanks Meter: 99	now what to do how to write this file

05-02-2015, 09:16	#8 (permalink)
sanyomobile No Life Poster Join Date: Oct 2012 Posts: 1,436 Member: 1824929 Status: Offline Thanks Meter: 99	Brand : samsung ProdName : lenovo72_we_jb3 ProdModel : GT-S7582 Device : lenovo72_we_jb3 AndroidVer: 4.2.2 MTKxCPU : MT6572 MTKxPRJ : ALPS.JB3.MP.V1 i have same file read but it says ScatCFG : BaseBand : MT6572 , Project : kingsung72_wet_lca , Storage : EMMC Setting : Flash Pre-Erase (Safe) : Enabled Setting : AFF verify : Enabled SecCfg Passed , 1799 BL : Check HW compatibility BL : BBID supported by BootLoader! BL : Check eMMC compatibility BL : eMMC NOT supported by BootLoader! [BL_ERROR] : STORAGE : Break Flashing! This Firmware will kill phone!

05-02-2015, 09:20	#9 (permalink)
JayDi No Life Poster Join Date: Mar 2007 Location: Where you live Posts: 18,542 Member: 462970 Status: Offline Thanks Meter: 20,352	It doesnt want to kill your phone. If you flash this fw with SPFT - phone will die. But, anyway - you can try do it, if really want.

05-02-2015, 09:29	#10 (permalink)
sanyomobile No Life Poster Join Date: Oct 2012 Posts: 1,436 Member: 1824929 Status: Offline Thanks Meter: 99	ok phone already dead with this file flash bya other box