GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 08-25-2015, 16:07   #1 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 15,948
Member: 462970
Status: Offline
Thanks Meter: 15,656
MT6735/MT8735 FULL and REAL Support + new stuff ;)


Target : MTK8735 , tablet.

Operation : Read Info ( Full + Extended )

It read - Boot , Phone Info , Extended Info.

What included in extended info?
Modem info - allow check and seek SAME models for NV/FW (even from DIFFERENT BRANDS!)
HW Info - allow CHECK/SEEK/VERIFY Hardware info ( supported by phone HW ) - allow check and seek SAME models for NV/FW (even from DIFFERENT BRANDS!)

Code:
Operation : Check / Read Info [ v1.26 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 63 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6735
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6735_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 5600017030303031E5D5063881B1C44E
DA Stat : v4.2 on BBID : 0x93
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : 80001
[eMMC] : FLASH_CID : 70010056313030303806D5E54EC43281
[eMMC] : FLASH_LEN : 0x00000001C3000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand     : Ursus
ProdName  : Ursus TS170
ProdModel : Ursus TS170
Device    : TS170
AndroidVer: 5.0
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L0.MP8.V1.1_FAJUE8735.6TB.4M.L

MODEM : 
BaseBand  : MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V1_P1_3G18_4G13720_1_lwg_n

EXTRA : 
LCD : Not info available :(
LCD Res : 600x1024
TOUCH [0] : GSLX6XX
CAM [0] : gc2235_mipi_raw
CAM [1] : gc2355_mipi_raw
CAM [2] : gc0339_mipi_raw
CAM [3] : gc0310_mipi_yuv
MODEM : fajue8735_3g18_4g13720_v0.2
LOCALE : en_US zh_CN zh_TW es_ES pt_BR ru_RU fr_FR de_DE tr_TR vi_VN ms_MY in_ID th_TH it_IT ar_EG hi_IN bn_IN ur_PK fa_IR pt_PT nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ ko_KR km_KH iw_IL my_MM pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB hy_AM zh_HK et_EE ja_JP kk_KZ sr_RS sl_SI ca_ES

Done!
Elapsed: 00:00:21
Reconnect Power/Cable!
NVRAM :

Now NVRAM saved as MODEM base. Which allow NOT depend on PHONE MODEL. Need just find same alive NVRAM ( up to every character ) with same BaseBand version!

Code:
Operation : Read NVRAM [ v1.26 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 63 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6735
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6735_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 5600017030303031E5D5063881B1C44E
DA Stat : v4.2 on BBID : 0x93
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : 80001
[eMMC] : FLASH_CID : 70010056313030303806D5E54EC43281
[eMMC] : FLASH_LEN : 0x00000001C3000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[Info] : BaseBand : MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V1_P1_3G18_4G13720_1_lwg_n
Read Ok, MT6735_S00_MOLY_LR9_W1444_MD_LWTG_MP_V1_P1_3G18_4G13720_1_lwg_n_eMMC.spnv saved

Done!
Elapsed: 00:00:17
Reconnect Power/Cable!
Repair Security :

Real repair security Now it supported few different types of new MTK platforms.

Code:
Operation : Repair Security [ v1.26 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 63 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6735
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6735_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 5600017030303031E5D5063881B1C44E
DA Stat : v4.2 on BBID : 0x93
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : 80001
[eMMC] : FLASH_CID : 70010056313030303806D5E54EC43281
[eMMC] : FLASH_LEN : 0x00000001C3000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

IMEI [00] : 352378070009463
IMEI [01] : 352378070009471

Set IMEI [00] : 009964432190542
Set IMEI [01] : 009964432190559
Prepare finished. Security check required!

Wait for phone...
Phone found! [ 63 ]
Sync...
PostCheck Ok! Repair done!

Done!
Elapsed: 00:00:41
Reconnect Power/Cable!
Read Factory Firmware :

Just a World First
CM2 ONLY one tool, which can read Factory Firmware from MTK phones. It same as factory one

Code:
Operation : Read Flash [ v1.26 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 63 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6735
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6735_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 5600017030303031E5D5063881B1C44E
DA Stat : v4.2 on BBID : 0x93
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : 80001
[eMMC] : FLASH_CID : 70010056313030303806D5E54EC43281
[eMMC] : FLASH_LEN : 0x00000001C3000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ... 

Brand     : Ursus
ProdName  : Ursus TS170
ProdModel : Ursus TS170
Device    : TS170
AndroidVer: 5.0
MTKxCPU   : MT6735
MTKxPRJ   : ALPS.L0.MP8.V1.1_FAJUE8735.6TB.4M.L

MediaTek MT67xx [x64] : Normalize settings Ok

[Read Ok] : preloader_l781.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : intsd.img

[ScatCFG] : MT6735 / V1.1.2 / l781 / EMMC
FW Size : 1403 MiB
Scatter saved to : E:\MT6735__Ursus__Ursus TS170__TS170__5.0__ALPS.L0.MP8.V1.1_FAJUE8735.6TB.4M.L\

All done!

Done!
Elapsed: 00:05:00
Reconnect Power/Cable!
Factory Firmware Writing :

Just a World First

Code:
Scatter Load Ok , BaseBand : MT6735 , Project : l781 , Storage : EMMC
Files found : 12 , Set to Flash : 11
Ready to Flash!
 
Operation : Flash [ v1.26 ]

======= Flash
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 63 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6735
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6735_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 5600017030303031E5D5063881B1C44E
DA Stat : v4.2 on BBID : 0x93
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : 80001
[eMMC] : FLASH_CID : 70010056313030303806D5E54EC43281
[eMMC] : FLASH_LEN : 0x00000001C3000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

ScatCFG : BaseBand : MT6735 , Project : l781 , Storage : EMMC
Setting : Flash Pre-Erase (Safe) : Enabled
Setting : AFF verify :  Enabled

BL : Check HW compatibility
BL : BBID supported by BootLoader!
BL : Check eMMC compatibility
BL : Only one records found, and determined as universal
BL : eMMC supported by BootLoader!

BL : Flash Pre-Erase
Total blocks to Erase : 1
Erase : 0x0000000001C80000-0x00000001C0300000
Flash Pre-Erase Done, time used : 00:00:03

SecCfg Passed , 1799
BMT remark not need. Will skip
Sending Preloader ... 
Use : preloader_l781.bin
Preloader Sent , Init passed
SecCfg Passed , 1799
PartCount : 0017
Update PMT by user request
Repartition Done!

Processing : Flash Write
Flash now : LK
Image Flash Ok
Flash now : BOOT
Image Flash Ok
Flash now : RECOVERY
Image Flash Ok
Flash now : LOGO
Image Flash Ok
Flash now : SECRO
Image Flash Ok
Flash now : TEE1
Image Flash Ok
Flash now : TEE2
Image Flash Ok
Flash now : SYSTEM
Image Flash Ok
Flash now : CACHE
Image Flash Ok
Flash now : USERDATA
Image Flash Ok
Flash now : INTSD
Image Flash Ok
Flash Write Done, time used : 00:07:47

Processing : Verify
Verify Passed : LK
Verify Passed : BOOT
Verify Passed : RECOVERY
Verify Passed : LOGO
Verify Passed : SECRO
Verify Passed : TEE1
Verify Passed : TEE2
Verify Passed : SYSTEM
Verify Passed : CACHE
Verify Passed : USERDATA
Verify Passed : INTSD
Data Verify Done, time used : 00:00:03

Update Mirror PMT
Update Done!

Update RomInfo done

Done!
Elapsed: 00:08:07
Reconnect Power/Cable!
Read PhoneBook :

While others bla-bla about "they world first and unique" - we just making new features

Code:
Operation : Read UserData [ v1.26 ]

PhoneBook : Enabled
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 63 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6735
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6735_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 5600017030303031E5D5063881B1C44E
DA Stat : v4.2 on BBID : 0x93
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : 80001
[eMMC] : FLASH_CID : 70010056313030303806D5E54EC43281
[eMMC] : FLASH_LEN : 0x00000001C3000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!


Step #1
Step #2


Read Ok, PhoneBook records extracted : 3
TXT Saved to : C:\MT6735_PhoneBook.txt
Write : 3
CSV Saved to : C:\MT6735_PhoneBook.csv
Write : 3
VCF Saved to : C:\MT6735_PhoneBook.vcf
Write : 3
VCFv3 Saved to : C:\MT6735_PhoneBook_v3.vcf

Done!
Elapsed: 00:00:23
Reconnect Power/Cable!
Reset UserLocks :

Without coments

Code:
Operation : Clear UserLocks [Pin/Pwd/Pattern/FVLock/GoogleAcc] [ v1.26 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 63 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6735
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6735_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 5600017030303031E5D5063881B1C44E
DA Stat : v4.2 on BBID : 0x93
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : 80001
[eMMC] : FLASH_CID : 70010056313030303806D5E54EC43281
[eMMC] : FLASH_LEN : 0x00000001C3000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

LSSA Ok!
LSSW Ok!
LSSS Ok!
LSSG Ok!
LSSK Ok!
Security Settings : Clear Ok!

[Info] : Android 5.x / MT67xx : If phone stuck on "Logo" 
1. Wait 2-3 minutes. Power Off phone by long press "Power" button
2. Power On phone again
3. Or wait up to 3-7 minutes, until phone start by itself
4. Also recommended reboot phone twice before start use it

Done!
Elapsed: 00:00:24
Reconnect Power/Cable!
Read PatternLock :

Without coments

Code:
Operation : Read PatternLock [ v1.26 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 63 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6735
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6735_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 5600017030303031E5D5063881B1C44E
DA Stat : v4.2 on BBID : 0x93
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : 80001
[eMMC] : FLASH_CID : 70010056313030303806D5E54EC43281
[eMMC] : FLASH_LEN : 0x00000001C3000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading data ... 
FS Size : 4096 MiB
Magic Ok
Mount point  : /data

Get PatternLock ...
PatternLock Sequnce : 12456987

Done!
Elapsed: 00:00:29
Reconnect Power/Cable!
Repair Preloader :

While some blamers even don't know about such feature and make empty noise about "not possible" to repair

Code:
Operation : Init Preloader [ v1.26 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 62 ]
Sync...
Inital regs read done
Boot Info : 
BB_CPU_ID : 6735
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6735_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending 
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 5600017030303031E5D5063881B1C44E
DA Stat : v4.2 on BBID : 0x93
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00BC
DRAM Init Ok , 0x40000000
DA Sent. Configure setting now ... 
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : 80001
[eMMC] : FLASH_CID : 70010056313030303806D5E54EC43281
[eMMC] : FLASH_LEN : 0x00000001C3000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

SecCfg Passed , 1799
BL : BBID supported by BootLoader!
Flash Info : 
FlashID [0] CID : 000000000000000000 , Name :  
BL : Only one records found, and determined as universal
BL : Storage supported by BootLoader!
Sending BootLoader ... 
Preloader Sent , Init passed
SecCfg Passed , 1799
PartTable Init Ok , Count : 18
All Done

Done!
Elapsed: 00:00:08
Reconnect Power/Cable!
  Reply With Quote
The Following 16 Users Say Thank You to JayDi For This Useful Post:
Show/Hide list of the thanked
Old 08-25-2015, 17:08   #2 (permalink)
No Life Poster
 
Nasir Mobiles's Avatar
 
Join Date: Sep 2006
Location: ---> Hope
Posts: 2,010
Member: 355782
Status: Offline
Thanks Meter: 1,240
and please don't forget to tick "Keep Preloader" by default. someone blindly format phone without keeping Preloader and will blame you.



wBw,
Nasir Javed
  Reply With Quote
Old 08-25-2015, 23:04   #3 (permalink)
No Life Poster
 
Join Date: May 2001
Location: Bulgaria
Posts: 4,578
Member: 4627
Status: Online
Sonork: 57528:debeliamark
Thanks Meter: 938
Quote:
Originally Posted by Nasir Mobiles View Post
and please don't forget to tick "Keep Preloader" by default. someone blindly format phone without keeping Preloader and will blame you.



wBw,
Nasir Javed
Yes - live Preloader status is ALLTIME preffered ...
  Reply With Quote
Old 08-26-2015, 00:14   #4 (permalink)
Product Manager
 
InfinitySupport's Avatar
 
Join Date: Mar 2005
Location: infinity-box
Posts: 37,851
Member: 130995
Status: Offline
Thanks Meter: 34,296
Official v1.26 release - Chinese Miracle-2 MTK v1.26 - Nokia MT6261, MT6735/MT8735, New Android features etc
  Reply With Quote
Old 08-26-2015, 02:42   #5 (permalink)
Freak Poster
 
Join Date: Feb 2013
Location: Molakalmuru (KARNATAKA) {INDIA
Posts: 145
Member: 1891452
Status: Offline
Thanks Meter: 28
Please put STOP button in setup
  Reply With Quote
The Following User Says Thank You to Mohammed Farooq For This Useful Post:
Old 08-26-2015, 02:48   #6 (permalink)
No Life Poster
 
Join Date: May 2003
Posts: 1,832
Member: 28559
Status: Offline
Thanks Meter: 73
please add nand scatter file reading .
  Reply With Quote
Old 08-26-2015, 03:15   #7 (permalink)
No Life Poster
 
bananin's Avatar
 
Join Date: Jun 2005
Age: 39
Posts: 1,252
Member: 150844
Status: Offline
Thanks Meter: 243
Cant use this version get upgrade dongle, but when try upgrade get error too:

----------Process started: 25/08/2015 20:13:07----------
25/08/2015 20:13:07 DongleManager version: 1.56
PC HWID: 5C3B92711FEB4E3E6D3xxxxxxxxxx
Card-Reader: OMNIKEY AG Smart Card Reader USB 0
Box/Dongle type: inf
Locating server...
Server address found
Connecting to server
Connection to server failedSocket Error # 11001
Host not found.
  Reply With Quote
Old 08-26-2015, 07:25   #8 (permalink)
No Life Poster
 
Nasir Mobiles's Avatar
 
Join Date: Sep 2006
Location: ---> Hope
Posts: 2,010
Member: 355782
Status: Offline
Thanks Meter: 1,240
but all done here no server issue.

Code:
Authenticating on server...
Authentication successfull
Checking DongleManager version...
Your DongleManager is up-to-date
Checking Dongle Identification...
Dongle Identification checked
Service stage 1 confirmed
Securing session...
Session secured ok
Upgrading dongle...
DO NOT disconnect Card !
WAIT 3-4 minutes !
Applet upgrade ok
Checking Dongle Identification...
Identification Ok. Finalizing...
Finalizing ok
Process completed
  Reply With Quote
Old 08-26-2015, 07:52   #9 (permalink)
No Life Poster
 
PASSIONATE_BOYS's Avatar
 
Join Date: Jul 2007
Location: Infinity-Box Support India-
Posts: 8,912
Member: 541591
Status: Offline
Sonork: 100.1611509
Thanks Meter: 6,978
Donate money to this user
Quote:
Originally Posted by bananin View Post
Cant use this version get upgrade dongle, but when try upgrade get error too:

----------Process started: 25/08/2015 20:13:07----------
25/08/2015 20:13:07 DongleManager version: 1.56
PC HWID: 5C3B92711FEB4E3E6D3xxxxxxxxxx
Card-Reader: OMNIKEY AG Smart Card Reader USB 0
Box/Dongle type: inf
Locating server...
Server address found
Connecting to server
Connection to server failedSocket Error # 11001
Host not found.
Hello,
Disable Antivirus and/or Firewall and try again.

Br.
  Reply With Quote
The Following User Says Thank You to PASSIONATE_BOYS For This Useful Post:
Old 08-26-2015, 08:31   #10 (permalink)
No Life Poster
 
sneha's Avatar
 
Join Date: Aug 2006
Location: BHARAT
Posts: 2,951
Member: 327043
Status: Offline
Sonork: 100.1587811
Thanks Meter: 1,441
Quote:
Originally Posted by bananin View Post
Cant use this version get upgrade dongle, but when try upgrade get error too:

----------Process started: 25/08/2015 20:13:07----------
25/08/2015 20:13:07 DongleManager version: 1.56
PC HWID: 5C3B92711FEB4E3E6D3xxxxxxxxxx
Card-Reader: OMNIKEY AG Smart Card Reader USB 0
Box/Dongle type: inf
Locating server...
Server address found
Connecting to server
Connection to server failedSocket Error # 11001
Host not found.
download latest dongle manager and use it

i solved same error with latest dongle manager
  Reply With Quote
The Following User Says Thank You to sneha For This Useful Post:
Old 08-26-2015, 09:28   #11 (permalink)
No Life Poster
 
Kirumira's Avatar
 
Join Date: Dec 2004
Location: Uganda
Posts: 2,848
Member: 96478
Status: Offline
Sonork: 100.1674604
Thanks Meter: 1,338
READING FACTORY FILE DODE

Start at : [26/08/2015 / 09:47:58]
Operation : Read Flash [ v1.26 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 24 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0xFE
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E3958524D4200D4E0DAD5714B
DA Stat : v4.2 on BBID : 0x88
DRAM not initialized , configure DRAM Settings
DRAM EmiReq Ok , 0x00A8
DRAM Init Ok , 0x10000000
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMRX9
[eMMC] : FLASH_CID : 1501004E3958524D4200D4E0DAD5714B
[eMMC] : FLASH_LEN : 0x0000000070000000
INT RAM : 0x00020000
EXT RAM : 0x10000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...
USBDL : Init HSUSB Ok!

Brand : alps
ProdName : magcomm72_cwet_lca
ProdModel : Z3
Device : magcomm72_cwet_lca
AndroidVer: 4.4.2
MTKxCPU : MT6572
MTKxPRJ : ALPS.KK1.MP7.V1.7

[Read Ok] : preloader_magcomm72_cwet_lca.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / magcomm72_cwet_lca / EMMC
FW Size : 677 MiB
Scatter saved to : D:\ANDROID FLASHFILES\MTK\New Folder (2)\MT6572__alps__Z3__magcomm72_cwet_lca__4.4.2__A LPS.KK1.MP7.V1.7\

All done!

Done!
Elapsed: 00:25:39
Reconnect Power/Cable!

Finish at : [26/08/2015 / 10:13:38]
  Reply With Quote
The Following User Says Thank You to Kirumira For This Useful Post:
Old 08-26-2015, 20:15   #12 (permalink)
No Life Poster
 
bananin's Avatar
 
Join Date: Jun 2005
Age: 39
Posts: 1,252
Member: 150844
Status: Offline
Thanks Meter: 243
Quote:
Originally Posted by sneha View Post
download latest dongle manager and use it

i solved same error with latest dongle manager
Quote:
Originally Posted by PASSIONATE_BOYS View Post
Hello,
Disable Antivirus and/or Firewall and try again.

Br.
I resolved deleting "DongleManager.ip" file from DongleManager folder.

Thanks
  Reply With Quote
Old 08-28-2015, 08:28   #13 (permalink)
No Life Poster
 
JayDi's Avatar
 
Join Date: Mar 2007
Posts: 15,948
Member: 462970
Status: Offline
Thanks Meter: 15,656
Quote:
Originally Posted by debeliamark View Post
Yes - live Preloader status is ALLTIME preffered ...
Quote:
Originally Posted by Nasir Mobiles View Post
and please don't forget to tick "Keep Preloader" by default. someone blindly format phone without keeping Preloader and will blame you.



wBw,
Nasir Javed
Activated by default now from 1.26 version.
  Reply With Quote
The Following 2 Users Say Thank You to JayDi For This Useful Post:
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


 



All times are GMT +1. The time now is 10:18.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.51188 seconds with 7 queries

SEO by vBSEO