GSM-Forum
Page 1 of 3 1 23
Show 50 post(s) from this thread on one page

GSM-Forum (https://forum.gsmhosting.com/vbb/)
-   Infinity-Box (https://forum.gsmhosting.com/vbb/f296/)
-   -   MTK6571/6572/6582/6589/6592 : Factory Firmware read : Chinese, Alcatel orig, HTC orig (https://forum.gsmhosting.com/vbb/f296/mtk6571-6572-6582-6589-6592-factory-firmware-read-chinese-alcatel-orig-htc-orig-1902400/)

Dzirt 01-11-2015 20:15
MTK6571/6572/6582/6589/6592 : Factory Firmware read : Chinese, Alcatel orig, HTC orig
 
Some tests ;)

NO NEED ADB.
NO NEED USB DEBUG.
NO NEED SD CARDS.
NO NEED ROOT and E.T.C.


Alcatel ONE TOUCH 6012X ( Original , MT6572 )
Code:
Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 63 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E35575A4D42013482CC50B0B1
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMZW5
[eMMC] : FLASH_CID : 1501004E35575A4D42013482CC50B0B1
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand    : TCT
ProdName  : California
ProdModel : ONE TOUCH 6012X
Device    : California
AndroidVer: 4.2.2
MTKxCPU  : MT6572
MTKxPRJ  : ALPS.JB3.MP.V1

[Read Ok] : preloader_california.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : custpack.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / california / EMMC
FW Size : 1186 MiB
Scatter saved to : E:\MT6572__TCT__ONE TOUCH 6012X__California__4.2.2__ALPS.JB3.MP.V1\

All done!

Done!
Elapsed: 00:06:33
Reconnect Power/Cable!
HTC Desire 210 ( Original , MT6572 )
Code:
Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 63 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 11010030303447393010CA918FD331B7
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0011 , OEM : 0100
[eMMC] : FLASH_INF : 09G40
[eMMC] : FLASH_CID : 11010030303447393010CA918FD331B7
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand    : htc
ProdName  : HTC_Eroupe
ProdModel : HTC Desire 210 dual sim
Device    : htc_v0_dug
AndroidVer: 4.2.2
MTKxCPU  : MT6572
MTKxPRJ  : SW_G98520A1_V010_M20_HTC_V0_EUROPE_MP

[Read Ok] : preloader_wt98520.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : blinkfeed.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6572 / V1.1.1 / wt98520 / EMMC
FW Size : 1190 MiB
Scatter saved to : E:\MT6572__htc__HTC Desire 210 dual sim__htc_v0_dug__4.2.2__SW_G98520A1_V010_M20_HTC_V0_EUROPE_MP\

All done!

Done!
Elapsed: 00:05:38
Reconnect Power/Cable!
MMX A290 , MTK6592
Code:
Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 63 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6592
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6592_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4838473264040506A11EA48107
DA Stat : v4.2 on BBID : 0x8A
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d2G8
[eMMC] : FLASH_CID : 90014A4838473264040506A11EA48107
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand    : Micromax
ProdName  : A290
ProdModel : Micromax A290
Device    : A290
AndroidVer: 4.4.2
MTKxCPU  : MT6592
MTKxPRJ  : ALPS.KK1.MP1.V2.10

[Read Ok] : preloader_s4750ae.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6592 / V1.1.2 / s4750ae / EMMC
FW Size : 1060 MiB
Scatter saved to : E:\MT6592__Micromax__Micromax A290__A290__4.4.2__ALPS.KK1.MP1.V2.10\

All done!

Done!
Elapsed: 00:05:19
Reconnect Power/Cable!
Various : MT6572

Code:
Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 63 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 90014A4834473164048601A21B138005
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0090 , OEM : 014A
[eMMC] : FLASH_INF : d1G4
[eMMC] : FLASH_CID : 90014A4834473164048601A21B138005
[eMMC] : FLASH_LEN : 0x00000000E7000000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand    : Android
ProdName  : Megafon
ProdModel : MS3A
Device    : Megafon
AndroidVer: 4.2.2
MTKxCPU  : MT6572
MTKxPRJ  : MS3A_092A_V8_0_8

[Read Ok] : preloader_huaqin72_we_iba_jb3.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / huaqin72_we_iba_jb3 / EMMC
FW Size : 934 MiB
Scatter saved to : E:\MT6572__Android__MS3A__Megafon__4.2.2__MS3A_092A_V8_0_8\

All done!

Done!
Elapsed: 00:04:52
Reconnect Power/Cable!
eMMC phones for now. Other - will follow.

DUNIYA JAMAL 01-11-2015 20:22
Mr.Dzirt
When will be ready new Update for users.

Br,

Dzirt 01-11-2015 20:28
Quote:
Originally Posted by DUNIYA JAMAL (Post 10792033)
Mr.Dzirt
When will be ready new Update for users.

Br,
Hello, preview version sent in PM.

hamim ctg 01-11-2015 20:33
brother when release this version

Dzirt 01-11-2015 20:49
Quote:
Originally Posted by hamim ctg (Post 10792047)
brother when release this version
When I get 20-25 reports from testers - it will be. If all success - will be tomorrow.

debeliamark 01-12-2015 07:05
Quote:
Originally Posted by Dzirt (Post 10792061)
When I get 20-25 reports from testers - it will be. If all success - will be tomorrow.
Mail me this test version - i have OT-4033X ( OT-C3 ) - new, unused - MT6572 inside

http://cdn2.gsmarena.com/vv/bigpic/a...pop-c3-new.jpg

Also OT-5038X ( OT-D5 ) - also new / unused - MT6582 inside

http://cdn2.gsmarena.com/vv/bigpic/alcatel-pop-d5.jpg

Also OT-6030X - MT6577 inside

http://cdn2.gsmarena.com/vv/bigpic/alcatel-ot-idol.jpg

ngocdiemmobile 01-12-2015 07:10
sent me test model new

MyGSM World 01-12-2015 07:33
Quote:
Originally Posted by Dzirt (Post 10792061)
When I get 20-25 reports from testers - it will be. If all success - will be tomorrow.
My Dear Best Friend,

I Also Want It. Send Me Also Please If Possible.

Thank You In Advance.

DUNIYA JAMAL 01-12-2015 08:29
Qmobile i5 Read full Info & Read Factory flash file Done:)

DUNIYA JAMAL 01-12-2015 09:45
Qmobile X11 Read full Info & Read Factory Flash Done:)

pradeep_kus 01-12-2015 09:50
Intex Y2 Kit-Ket Read Full Info Or Read Flash Done !
 
Here Is Full Info

Code:
Operation : Check / Read Info [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 42 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 7001004D4D43303447583AB910899173
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : G40CM
[eMMC] : FLASH_CID : 7001004D4D43303447583AB910899173
[eMMC] : FLASH_LEN : 0x00000000E6800000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Initial info read Ok!

Brand    : Intex
ProdName  : a99e_ax_kewang_4008
ProdModel : Aqua Y2
Device    : Aqua Y2
AndroidVer: 4.4.2
MTKxCPU  : MT6572
MTKxPRJ  : Intex_Aqua_Y2_V06_K_India

Done!
Elapsed: 00:00:16
Reconnect Power/Cable!

Read Flash

Code:
Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 42 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6572
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6572_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 7001004D4D43303447583AB910899173
DA Stat : v4.2 on BBID : 0x88
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : G40CM
[eMMC] : FLASH_CID : 7001004D4D43303447583AB910899173
[eMMC] : FLASH_LEN : 0x00000000E6800000
INT RAM    : 0x00020000
EXT RAM    : 0x20000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand    : Intex
ProdName  : a99e_ax_kewang_4008
ProdModel : Aqua Y2
Device    : Aqua Y2
AndroidVer: 4.4.2
MTKxCPU  : MT6572
MTKxPRJ  : Intex_Aqua_Y2_V06_K_India

[Read Ok] : preloader_a99e_ax_kewang_4008.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6572 / V1.1.1 / a99e_ax_kewang_4008 / EMMC
FW Size : 851 MiB
Scatter saved to : C:\Documents and Settings\Administrator\Desktop\y2\MT6572__Intex__Aqua Y2__Aqua Y2__4.4.2__Intex_Aqua_Y2_V06_K_India\

All done!

Done!
Elapsed: 00:04:44
Reconnect Power/Cable!

DUNIYA JAMAL 01-12-2015 10:04
Gfive President G9 Read Full Info & Read Factory Flash Done:)


http://i58.tinypic.com/1zekos8.jpg

http://i59.tinypic.com/2dhcjdt.jpg

Also Read Pattern Lock Done:)

Code:
Operation : Read PatternLock [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 78 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 5300014534304D451934284783903B75
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0045 , OEM : 0100
[eMMC] : FLASH_INF : G40ME
[eMMC] : FLASH_CID : 45010053454D303447283419753B9083
[eMMC] : FLASH_LEN : 0x00000000EC000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading data ...
FS Size : 1535 MiB
Magic Ok
Mount point  : /data

Get PatternLock ...
PatternLock Sequnce : 14569

Done!
Elapsed: 00:00:15
Reconnect Power/Cable!

pradeep_kus 01-12-2015 11:33
Karbonn A19 Repier Imei Done
 
Log

Code:
Chinese Miracle II  [MTK module] v 1.09

Operation : Repair Security [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 42 ]
Sync...
Init Ok, waiting for phone ...
Reading initial info, wait...
Phone Info :
BB : MT6572, E01
HW : MBK72_WET_JB3_HSPA_HW
SW : MOLY.WR8.W1315.MD.WG.MP.V1.P3
MM : 2000.00.00
VR : 1.0
Security Info :
IMEI [1] : Damaged!
IMEI [2] : Damaged or not exists
Read Ok!
Update IMEI[1] to : 911359051818084 done!
Update IMEI[2] to : 911359051818092 done!

Done!
Elapsed: 00:01:01
Reconnect Power/Cable!

saeedullah_khan 01-12-2015 12:24
QTab Q300
 
Code:
Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 23 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582|8312_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 7001004D4D43303847580E63FB43312F
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : G80CM
[eMMC] : FLASH_CID : 7001004D4D43303847580E63FB43312F
[eMMC] : FLASH_LEN : 0x00000001CD000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand    : QTab
ProdName  : reallytek82_tb_jb5
ProdModel : QTab Q300
Device    : reallytek82_tb_jb5
AndroidVer: 4.2.2
MTKxCPU  : MT6582
MTKxPRJ  : QTabQ300_MP_04-28-14

[Read Ok] : preloader_reallytek82_tb_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6582 / V1.1.1 / reallytek82_tb_jb5 / EMMC
FW Size : 1318 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6582__QTab__QTab Q300__reallytek82_tb_jb5__4.2.2__QTabQ300_MP_04-28-14\

All done!

Done!
Elapsed: 00:06:19
Reconnect Power/Cable!

hamza_ali8888 01-12-2015 12:30
Quote:
Originally Posted by saeedullah_khan (Post 10793184)
Code:
Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 23 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582|8312_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 7001004D4D43303847580E63FB43312F
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0070 , OEM : 0100
[eMMC] : FLASH_INF : G80CM
[eMMC] : FLASH_CID : 7001004D4D43303847580E63FB43312F
[eMMC] : FLASH_LEN : 0x00000001CD000000
INT RAM    : 0x00020000
EXT RAM    : 0x40000000
BOOT TYPE  : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand    : QTab
ProdName  : reallytek82_tb_jb5
ProdModel : QTab Q300
Device    : reallytek82_tb_jb5
AndroidVer: 4.2.2
MTKxCPU  : MT6582
MTKxPRJ  : QTabQ300_MP_04-28-14

[Read Ok] : preloader_reallytek82_tb_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6582 / V1.1.1 / reallytek82_tb_jb5 / EMMC
FW Size : 1318 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6582__QTab__QTab Q300__reallytek82_tb_jb5__4.2.2__QTabQ300_MP_04-28-14\

All done!

Done!
Elapsed: 00:06:19
Reconnect Power/Cable!

where is firmwere.................................?:confuse d::confused:


All times are GMT +1. The time now is 14:19.
Page 1 of 3 1 23
Show 50 post(s) from this thread on one page


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -

Page generated in 0.19822 seconds with 6 queries

SEO by vBSEO