MTK6571/6572/6582/6589/6592 : Factory Firmware read : Chinese, Alcatel orig, HTC orig
 

Some tests ;)

NO NEED ADB.
NO NEED USB DEBUG.
NO NEED SD CARDS.
NO NEED ROOT and E.T.C.


Alcatel ONE TOUCH 6012X ( Original , MT6572 )
HTC Desire 210 ( Original , MT6572 )
MMX A290 , MTK6592
Various : MT6572

eMMC phones for now. Other - will follow.

Hello, preview version sent in PM.

brother when release this version

When I get 20-25 reports from testers - it will be. If all success - will be tomorrow.

Mail me this test version - i have OT-4033X ( OT-C3 ) - new, unused - MT6572 inside

http://cdn2.gsmarena.com/vv/bigpic/a...pop-c3-new.jpg

Also OT-5038X ( OT-D5 ) - also new / unused - MT6582 inside

http://cdn2.gsmarena.com/vv/bigpic/alcatel-pop-d5.jpg

Also OT-6030X - MT6577 inside

http://cdn2.gsmarena.com/vv/bigpic/alcatel-ot-idol.jpg

sent me test model new

My Dear Best Friend,

I Also Want It. Send Me Also Please If Possible.

Thank You In Advance.

Qmobile i5 Read full Info & Read Factory flash file Done:)

Qmobile X11 Read full Info & Read Factory Flash Done:)

Intex Y2 Kit-Ket Read Full Info Or Read Flash Done !
 

Here Is Full Info


Read Flash

Gfive President G9 Read Full Info & Read Factory Flash Done:)

Karbonn A19 Repier Imei Done
 

Log

QTab Q300
 

where is firmwere.................................?:confuse d::confused:

Voice Xtreme V75 4.2.1 MT6589
 

Intex y2 Pro Read Full Info Or Read Factory Firmware Done ;)
 

Read Info


Read Flash

Which Frimware Bro ? Do You Have Infinity-Cm2? Can You Pls Post Here Idenity Fully Info !

Karbonn A19 Read Info Or Read Fully Info Done ;)
 

Read Fully Info


Read Flash

Micromax A067 Read Info And Read Flash Done
 

Read Info


Read Flash

Testing latest beta CM2MTK 1.09 ... results:
 

Alcatel OT-Pop C3 ( OT-4033X ) - MT6572 based = OK!!!:
Alcatel Idol ( OT-6030X ) - MT6575 based = Not OK !:
Alcatel Pop-C5 ( OT-5038X ) - MT6582 based - it's not supported by this release, but just for tests:

Under Win 7 - 32 bit:

http://forum.gsmhosting.com/vbb/atta...1&d=1421073543

Same at WinXP - 32 bit:

http://forum.gsmhosting.com/vbb/atta...1&d=1421073997

Anyway - FullFlash is saved at my CM2MTK readouts folder.

Huawei Y511-U10 - MT6572 based = OK! :
ZTE Grand X Pro - also unsupported CPU - again - just for tests:

QMobile A51
 

@debeliamark , thanks! Dump from this 6582 will help me a lot, download now.
If possible, make also "debug log" - Other -> Make Debug log.
It make problems seek more faster.

MT6575/MT6577 will be supported also, for now I decide deactivate it.

Qmobile i9 Read full info and Read factory Flash Done:)
READ FULL INFO
READ FACTORY FLASH

@Dzirt.. boss can you sendme a link to donwload this new version.. i have many many phones to test mt6572, 6571..etc

Please can you???

Thanks in advance
>>MaO<<

@maomatrix , sent in PM.

Will get few unsupported devices today and finish release version.

Intex Cloud Y17+ Sucessfully read factory Firmware
 

Read Full Flash

sir ji downlode link 1.09

Intex Aqua i6 read full info and factory firmware done-

Card found: S/N
Chinese Miracle II [MTK module] v 1.09

Operation : Check / Read Info [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 24 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582|8312_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E35575A4D420128B4C29DA0EF
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMZW5
[eMMC] : FLASH_CID : 1501004E35575A4D420128B4C29DA0EF
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Initial info read Ok!

Brand : Aqua
ProdModel : Aqua i6
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : Intex_Aqua_i6_V13_indian

Done!
Elapsed: 00:00:12
Reconnect Power/Cable!


Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 24 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6582
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6582|8312_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004E35575A4D420128B4C29DA0EF
DA Stat : v4.2 on BBID : 0x87
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMZW5
[eMMC] : FLASH_CID : 1501004E35575A4D420128B4C29DA0EF
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Brand : Aqua
ProdModel : Aqua i6
AndroidVer: 4.2.2
MTKxCPU : MT6582
MTKxPRJ : Intex_Aqua_i6_V13_indian

[Read Ok] : preloader_huaqin82_we_iba_jb5.bin
[Read Ok] : MBR
[Read Ok] : EBR1
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : secro.img
[Read Ok] : logo.bin
[Read Ok] : EBR2
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img
[Read Ok] : fat.img

[ScatCFG] : MT6582 / V1.1.1 / huaqin82_we_iba_jb5 / EMMC
FW Size : 934 MiB
Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6582__Aqua__Aqua i6___4.2.2__Intex_Aqua_i6_V13_indian\

All done!

Done!
Elapsed: 00:05:07
Reconnect Power/Cable!

No need of any mmc inside phone for reading factory firmware anymore, done at blazing speed:D

Br.

@debeliamark ,after 1 byte change it start working. Seems as new Alcatel will work well from now.
Release follow after few hours.

It's interesting that ZTE Blade L2 factory and full readout is OK on same MT6582 with 1.09 beta

MTK module] v 1.09 downlode

Hello,
Just wait for little more time as new version will be released soon, beta version is already under test.

Br.

Lava Iris405+
 

Lava Iris405+

Read Info


Read Firmware

ZTE factory flash file can be accessed via http://forum.gsmhosting.com/vbb/f809.../#post10795787 .

Mediatek Tablet read flash done by 1.09-

Start at : [1/13/2015 / 7:28:05 PM]
Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 24 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6575
BB_CPU_HW : CB00
BB_CPU_SW : 8B00
BB_CPU_SB : E201
BB_CPU_NM : [MediaTek] MT6575_S00
Processing BROM stage
i2c Init : 0300771F
SpeedSet : 0000
VChrgSet : 0x28 , BatStat : 0x02
WD Disable stat : 0x0000
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Stat : v3.2 on BBID : 0x84
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : M00U5
[eMMC] : FLASH_CID : 1501004E355530304D02B61AC4D1909D
[eMMC] : FLASH_LEN : 0x00000000E9000000
INT RAM : 0x00020000
EXT RAM : 0x20000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

Read Ok , collect info
Brand : WP-5200
ProdName : hexing77_jb
ProdModel : WP-5200
Device : hexing77_jb
AndroidVer: 4.2.2
MTKxCPU : MT6577
MTKxPRJ : ALPS.JB.MP.V1.16
Saved to : C:\InfinityBox\CM2MTK\Flash\MT6577__WP-5200__WP-5200__ALPS.JB.MP.V1.16__Android_4.2.2__20140210_10 4222.ispff

After read firmware full info displayed. Backup is of 3.64Gb and time took about 30 min for full backup.
Br.

It is full Dump, when figure out some problems with 6577 - will be added.

Hello boss, i also need v1.09 version.

Hello.
It will be on support area after hour or so.

L6 Alps (MT6572)

Read info

Read Fimware

Q MOBILE Z4 READ FACTORY FILE ERROR.

Chinese Miracle II [MTK module] v 1.09

Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 86 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0x05
BLVersion : 0xFE
Preloader Status : Not active (Erased)
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 4900011530305532D84C174189905676
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now ...
NAND FlashIC initialized
[NAND] : FLASH_VEN : 0x0000 , [SAMSUNG] K9F5608Q0C
[NAND] : FLASH_DIE : 0000 0000 0000 0000 0000 0000 0000
[NAND] : FLASH_LEN : 0x00000000
INT RAM : 0x00000000
EXT RAM : 0x00000000
BOOT TYPE : DONE
SOC VERIFY : 00
Boot Ok!

Reading Flash Conent now ...
Not supported FlashType for this operation yet :(

Done!
Elapsed: 00:00:26
Reconnect Power/Cable!


IF I READ FULL FLASH FILE THEN NO FACE ANY ERROR.


Operation : Read Flash [ v1.09 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone...
Phone found! [ 7 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6583
BB_CPU_HW : CA01
BB_CPU_SW : 8A00
BB_CPU_SB : 0001
BB_CPU_NM : [MediaTek] MT6583|6589_S00
Processing BROM stage
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 4900011530305532D84C174189905676
DA Stat : v3.2 on BBID : 0x86
DA Sent. Configure setting now ...
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : A00U2
[eMMC] : FLASH_CID : 150100493255303041174CD876569089
[eMMC] : FLASH_LEN : 0x0000000747C00000
INT RAM : 0x00020000
EXT RAM : 0x80000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Conent now ...

@FullFlashPak

Connect without boot key just Insert usb cable

Exactly right. Very glad to see about some peoples still reading logs and can find problem.

NEED FRIMWARE


Wait for phone...
Phone found! [ 10 ]
Sync...
Inital regs read done
Boot Info :
BB_CPU_ID : 6592
BB_CPU_HW : CA00
BB_CPU_SW : 8A00
BB_CPU_SB : 0000
BB_CPU_NM : [MediaTek] MT6592_S00
Processing BROM stage
BLVersion : 0x01
SecCfgVal : 0x00000000
BromVersion : 0xFF
BLVersion : 0x01
Preloader Status : Alive
Processing DA stage
DA Select done , sending
DA Ver : MTK_AllInOne_DA_v7.1533.03
NAND_ID : 00000000000000000000000000000000
eMMC_ID : 1501004B3758564D42017319EA8D81EB
DA Stat : v4.2 on BBID : 0x8A
DA Sent. Configure setting now ...
DA started successuflly
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0015 , OEM : 0100
[eMMC] : FLASH_INF : BMVX7
[eMMC] : FLASH_CID : 1501004B3758564D42017319EA8D81EB
[eMMC] : FLASH_EXT : 00400000/00080000
[eMMC] : FLASH_LEN : 0x00000001D2000000
INT RAM : 0x00020000
EXT RAM : 0x40000000
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

[AP] : Initial info read Ok!

Brand : TCL
ProdName : 6042D
ProdModel : 6042D
Device : CROSSAPAC
AndroidVer: 4.4.2
MTKxCPU : MT6592
MTKxPRJ : ALPS.KK1.MP1.V2.10

Done!
Elapsed: 00:00:10
Reconnect Power/Cable