GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 06-28-2009, 18:34   #1 (permalink)
Insane Poster
 
Join Date: Sep 2008
Posts: 63
Member: 864938
Status: Offline
Thanks Meter: 3
my infinity box not working please help,.


my infinity box has just stoped working suddenly,i was unlocking huawei t201,..i have unlocked almost 100pcs,but it just stoped,...when i press power on for the phone to boot ,the phone doesnt respond,full bettery charged,..good charging connector,..i have tried different pc but still same problem,i have uninstalled and installed setup but still the proble, please any one to help me?
  Reply With Quote
Old 06-28-2009, 19:16   #2 (permalink)
Product Manager
 
InfinitySupport's Avatar
 
Join Date: Mar 2005
Location: infinity-box
Posts: 37,851
Member: 130995
Status: Offline
Thanks Meter: 34,296
Quote:
Originally Posted by patty2007 View Post
my infinity box has just stoped working suddenly,i was unlocking huawei t201,..i have unlocked almost 100pcs,but it just stoped,...when i press power on for the phone to boot ,the phone doesnt respond,full bettery charged,..good charging connector,..i have tried different pc but still same problem,i have uninstalled and installed setup but still the proble, please any one to help me?
huawei-t201-hw-a,..doesnt respond
  Reply With Quote
Old 06-30-2009, 17:22   #3 (permalink)
Junior Member
 
Join Date: Apr 2007
Posts: 37
Member: 496392
Status: Offline
Thanks Meter: 2
pls i have a problem with my infinity box; not connect to phone here is log;


==== log opened: [6/12/2009 3:17:13 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] Chinese Miracle v2.82
S/N: 4C5E:0111
error: Dongle firmware[0111] is out of date (too old) !
Download latest "DongleManager" from support area and upgrade Dongle firmware !
==== log opened: [6/12/2009 3:19:10 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] Chinese Miracle v2.82
S/N: 4C5E:0112
Wait...
Device: Autodetect 6205-6227 NOR
Done
==== log: [6/12/2009 3:19:58 PM] ====
COM8 [VCP0] selected
module v2.82
Action: read codes
unlock method: read codes
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
error: can't activate test mode
error: operation failed !
Finished, time used: 15 sec
Remove/Install battery now !
COM7 ready
error: can't open COM6
error: can't open COM3
==== log opened: [6/14/2009 2:03:51 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] Chinese Miracle v2.82
S/N: 4C5E:0112
Wait...
Device: Autodetect 6205-6227 NOR
Done
==== log: [6/14/2009 2:19:16 PM] ====
COM8 [VCP0] selected
module v2.82
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: repair "bad software" (mode-1)
Boot ...
Press and HOLD Power button now !
==== log opened: [6/14/2009 2:27:27 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] Chinese Miracle v2.82
S/N: 4C5E:0112
Wait...
Device: Autodetect 6205-6227 NOR
Done
==== log: [6/14/2009 3:07:12 PM] ====
COM8 [VCP0] selected
module v2.82
Action: imei
imei write method: mode-2
imei write channel: imei #1 for dual sim/mono CPU
new imei: 350448011234561
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
error: can't activate test mode
error: operation failed !
Finished, time used: 20 sec
Remove/Install battery now !
Imei 35044801123456 already was repaired: 6/14/2009-3:07:38 PM
Continue with this imei ?
==== log: [6/14/2009 3:07:58 PM] ====
COM8 [VCP0] selected
module v2.82
Action: imei
imei write method: mode-2
imei write channel: imei #1 for dual sim/mono CPU
new imei: 350448011234561
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
error: can't activate test mode
error: operation failed !
Finished, time used: 43 sec
Remove/Install battery now !
Imei 35044801123456 already was repaired: 6/14/2009-3:08:47 PM
Continue with this imei ?
operation aborted
Imei 35044801123456 already was repaired: 6/14/2009-3:08:47 PM
Continue with this imei ?
Action: imei
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
baud set to: 19200
error: connection failed !
operation failed !
Finished, time used: 79 sec
Power off phone now !
Imei 35044801123456 already was repaired: 6/14/2009-3:12:26 PM
Continue with this imei ?
Action: imei
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
baud set to: 19200
error: connection failed !
operation failed !
Finished, time used: 85 sec
Power off phone now !
Imei 35044801123456 already was repaired: 6/14/2009-3:14:12 PM
Continue with this imei ?
Action: imei
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
baud set to: 19200
error: connection failed !
operation failed !
Finished, time used: 79 sec
Power off phone now !
Imei 35044801123456 already was repaired: 6/14/2009-3:15:42 PM
Continue with this imei ?
==== log: [6/14/2009 3:16:38 PM] ====
COM8 [VCP0] selected
module v2.82
Action: imei
imei write method: mode-2
imei write channel: imei #1 for dual sim/mono CPU
new imei: 350448011234561
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
error: can't activate test mode
error: operation failed !
Finished, time used: 57 sec
Remove/Install battery now !
Imei 35044801123456 already was repaired: 6/14/2009-3:17:42 PM
Continue with this imei ?
==== log: [6/14/2009 3:17:49 PM] ====
COM8 [VCP0] selected
module v2.82
Action: imei
imei write method: mode-2
imei write channel: imei #1 for dual sim/mono CPU
new imei: 350448011234561
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
error: can't activate test mode
error: operation failed !
Finished, time used: 23 sec
Remove/Install battery now !
Imei 35044801123456 already was repaired: 6/14/2009-3:18:18 PM
Continue with this imei ?
==== log: [6/14/2009 3:20:00 PM] ====
COM8 [VCP0] selected
module v2.82
Action: imei
imei write method: mode-2
imei write channel: imei #1 for dual sim/mono CPU
new imei: 350448011234561
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
error: can't activate test mode
error: operation failed !
Finished, time used: 22 sec
Remove/Install battery now !
Device: Autodetect 6228-6230 NAND
Imei 35044801123456 already was repaired: 6/14/2009-3:20:28 PM
Continue with this imei ?
Action: imei
Model: Autodetect 6228-6230 NAND
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
baud set to: 19200
error: connection failed !
operation failed !
Finished, time used: 79 sec
Power off phone now !
Imei 35044801123456 already was repaired: 6/14/2009-3:22:46 PM
Continue with this imei ?
Action: imei
Model: Autodetect 6228-6230 NAND
Checking data, wait...
error: can't open com port
error: connection failed !
operation failed !
Finished, time used: 2 sec
Power off phone now !
COM11 ready
Device: Autodetect 6205-6227 NOR
Imei 35044801123456 already was repaired: 6/14/2009-3:27:37 PM
Continue with this imei ?
==== log: [6/14/2009 3:28:53 PM] ====
COM11 [VCP0] selected
module v2.82
Action: imei
imei write method: mode-2
imei write channel: imei #1 for dual sim/mono CPU
new imei: 350448011234561
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
19200 autodetect
error: boot phase #2/1 failed
Can not initialize test mode !
Possible reasons:
1. communication fault, repeat required operation
2. ffs/eeprom is serious damaged, use repair ffs/eeprom files or use other unlock/format method
error: operation failed !
Finished, time used: 279 sec
Remove/Install battery now !
Imei 35044801123456 already was repaired: 6/14/2009-3:33:38 PM
Continue with this imei ?
==== log: [6/14/2009 3:33:52 PM] ====
COM11 [VCP0] selected
module v2.82
Action: imei
imei write method: mode-2
imei write channel: imei #1 for dual sim/mono CPU
new imei: 350448011234561
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
9600 autodetect
error: boot phase #2/1 failed
Can not initialize test mode !
Possible reasons:
1. communication fault, repeat required operation
2. ffs/eeprom is serious damaged, use repair ffs/eeprom files or use other unlock/format method
error: operation failed !
Finished, time used: 81 sec
Remove/Install battery now !
==== log: [6/14/2009 3:36:45 PM] ====
COM11 [VCP0] selected
module v2.82
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: repair "bad software" (mode-2)
Boot ...
Press and HOLD Power button now !
baud autodetection active
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 148 sec
Remove/Install battery now !
Imei 35044801123456 already was repaired: 6/14/2009-3:35:20 PM
Continue with this imei ?
==== log: [6/14/2009 3:39:52 PM] ====
COM11 [VCP0] selected
module v2.82
Action: imei
imei write method: mode-2
imei write channel: imei #1 for dual sim/mono CPU
new imei: 350448011234561
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched OFF !
Press and HOLD Power button now !
error: can't activate test mode
error: operation failed !
Finished, time used: 278 sec
Remove/Install battery now !
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
baud set to: 19200
error: connection failed !
operation failed !
Finished, time used: 79 sec
Power off phone now !
==== log: [6/14/2009 3:48:42 PM] ====
COM11 [VCP0] selected
module v2.82
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read/check detailed information
Boot ...
Press and HOLD Power button now !
baud autodetection active
19200 autodetect
Connecting, wait...
error: can't detect CPU id
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 14 sec
Remove/Install battery now !
==== log opened: [6/27/2009 6:13:44 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] Chinese Miracle v2.82
S/N: 4C5E:0112
Wait...
Device: Autodetect 6205-6227 NOR
Done
==== log opened: [6/27/2009 6:50:54 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] Chinese Miracle v2.82
error: Dongle is not found
==== log opened: [6/27/2009 6:51:22 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] Chinese Miracle v2.82
error: Dongle is not found
==== log opened: [6/27/2009 6:54:52 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] Chinese Miracle v2.82
S/N: 4C5E:0112
Wait...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
baud set to: 19200
error: connection failed !
operation failed !
Finished, time used: 10 sec
Power off phone now !
==== log opened: [6/28/2009 1:09:19 PM] ====
Application: C:\Program Files\InfinityBox\ChineseMiracle\ChineseMiracle.ex e
Loading data, wait...
[Infinity Box] Chinese Miracle v2.82
S/N: 4C5E:0112
Wait...
Device: Autodetect 6205-6227 NOR
Done
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
baud set to: 19200
error: connection failed !
operation failed !
Finished, time used: 79 sec
Power off phone now !
==== log: [6/28/2009 1:11:24 PM] ====
COM8 [VCP0] selected
module v2.82
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 98 sec
Remove/Install battery now !
==== log: [6/28/2009 1:13:41 PM] ====
COM8 [VCP0] selected
module v2.82
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read ffs/eeprom
Boot ...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 143 sec
Remove/Install battery now !
==== log: [6/28/2009 1:23:04 PM] ====
COM8 [VCP0] selected
module v2.82
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 45 sec
Remove/Install battery now !
Device: Autodetect 6228-6230 NAND
==== log: [6/28/2009 1:24:28 PM] ====
COM8 [VCP0] selected
module v2.82
Device: Autodetect 6228-6230 NAND
Checking data, wait...
Action: read NAND flash
read mode: 01
Boot ...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
Boot Fail
Finished, time used: 58 sec
Remove/Install battery now !
Device: Autodetect 6205-6227 NOR
==== log: [6/28/2009 1:25:55 PM] ====
COM8 [VCP0] selected
module v2.82
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 46 sec
Remove/Install battery now !
==== log: [6/28/2009 1:27:14 PM] ====
COM8 selected
module v2.82
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 57 sec
Remove/Install battery now !
==== log: [6/28/2009 1:28:44 PM] ====
COM8 selected
module v2.82
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
Action: read NOR flash
Boot ...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 62 sec
Remove/Install battery now !
Action: read information
Model: Autodetect 6205-6227 NOR
Checking data, wait...
Phone should be Switched ON !
Connecting, wait...
baud set to: 460800
error: connection failed !
operation failed !
Finished, time used: 20 sec
Power off phone now !
  Reply With Quote
Old 06-30-2009, 18:23   #4 (permalink)
Freak Poster
 
Join Date: Aug 2008
Location: Cote d'Ivoire
Posts: 261
Member: 841640
Status: Offline
Thanks Meter: 74
Download latest "DongleManager" from support area and upgrade Dongle firmware ! .....that will solve your problem
  Reply With Quote
Old 07-01-2009, 22:11   #5 (permalink)
Product Manager
 
InfinitySupport's Avatar
 
Join Date: Mar 2005
Location: infinity-box
Posts: 37,851
Member: 130995
Status: Offline
Thanks Meter: 34,296
@garus
It looks like you have used wrong cable.
Please, double check your cable, it mat be that you need to swap Rx/Tx wires.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
infinity box not working plz help infinity team Y2ksalman Infinity-Box 21 01-18-2011 00:51
My Twister Box Not Working,, (Plz Help Me) sonojee Twisterflasher 3 03-25-2010 10:00
my spiderman box not working...plz help me ameer39001 SpiderMan 1 03-18-2010 15:53
My USF HWK box not working please help r2rajput Nokia Hardware & Hardware Repair 2 08-29-2009 16:37
Infinity box not found please help rxzgsm Infinity-Box 1 01-13-2009 17:32

 



All times are GMT +1. The time now is 18:29.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.34509 seconds with 8 queries

SEO by vBSEO