N72 formate successfully - GSM-Forum

cellbhai · 10-02-2007, 11:17

N72 restart with sim complaint.formate the set.now working good.log is here.

COM3 [VCP0] selected
Device: Autodetect 6205-6227,6228 NOR
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.52E6881C.[TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN_BA 219E82].rpl
New firmware detected: TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
device-id: 52E6881C
protocol ver: 04
ver. sw1: TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN
ver. sw2: BASECODE
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [eeprom[TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN]]...
file saved: backup_eeprom[TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN]_20071002-151821.B0E.bin
flash: 01227E22202200:29EA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 01227E22202200:29EA0000000000
Write Done
file saved: backup_system_log_52E6881C_TELSDA26_05C_PCB01_GPRS _MT6226_S01.BASECODE.BIN_BA219E82_20071002-151837.B0X.bin
Finished, time used: 328 sec
Remove/Install battery now !

jimm07ct · 10-02-2007, 14:38

well done , keep it up.............

tsarkh · 10-02-2007, 16:33

can u post the photo of the phone ??? and the pinout too...

BadUnlockers · 10-31-2007, 10:25

pls post here the pinout for this fone,it is highly needed in this forum

**InfinitySupport** · 11-01-2007, 00:40

Yes, it's really good idea to post pinouts and phone photo.

BadUnlockers · 11-05-2007, 08:59

Quote:

Originally Posted by cellbhai

N72 restart with sim complaint.formate the set.now working good.log is here.

COM3 [VCP0] selected
Device: Autodetect 6205-6227,6228 NOR
Checking data, wait...
advanced flash detection active
Action: reset
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
Initialize Done
Set baud...
115200
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22202200:29EA0000000000
flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.52E6881C.[TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN_BA 219E82].rpl
New firmware detected: TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
device-id: 52E6881C
protocol ver: 04
ver. sw1: TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN
ver. sw2: BASECODE
ffs offset/size: 00E00000/00200000
detecting eeprom area in 1 chip(s)...
flash: 01227E22202200:29EA0000000000
checking area[00000000]: 00000000-00FFFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 00
eeprom area: 00000000:00E00000-00FFFFFF
reading [eeprom[TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN]]...
file saved: backup_eeprom[TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN]_20071002-151821.B0E.bin
flash: 01227E22202200:29EA0000000000
Identification Done
Manipulation...
Manipulation Done
Finalization...
Finalization Done
Write...
formatting...
flash: 01227E22202200:29EA0000000000
Write Done
file saved: backup_system_log_52E6881C_TELSDA26_05C_PCB01_GPRS _MT6226_S01.BASECODE.BIN_BA219E82_20071002-151837.B0X.bin
Finished, time used: 328 sec
Remove/Install battery now !

hey man,are you going to give us the pinout 4 this fone,or do we have to pay you for it?!!!

10-02-2007, 11:17	#1 (permalink)
cellbhai No Life Poster Join Date: Sep 2005 Age: 59 Posts: 733 Member: 185776 Status: Offline Thanks Meter: 73	N72 formate successfully N72 restart with sim complaint.formate the set.now working good.log is here. COM3 [VCP0] selected Device: Autodetect 6205-6227,6228 NOR Checking data, wait... advanced flash detection active Action: reset Boot... Press and HOLD Power button now ! baud autodetection active 19200 Connecting, wait... Initializing[6226:8A02:8A01]... high speed disabled boot step size: 0002 Release Power button now ! Boot Done Initialize... detecting chip #00 in region #00... flash: 01227E22202200:29EA0000000000 flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb number of flash chip/regions detected: 01/01 Initialize Done Set baud... 115200 Set baud Done Identification... device parameters autodetection in progress.. detecting chip #00 in region #00... flash: 01227E22202200:29EA0000000000 flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb number of flash chip/regions detected: 01/01 total flash region size: 01000000 detect device identification, method #1... detection phase #1... detect device parameters finished structure: 2nd [enhanced] (or higher) generation identification data Ok identification data backup saved: id.52E6881C.[TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN_BA 219E82].rpl New firmware detected: TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN - make "Read detailed information, ask/rpl" operation - send "backup_system_log_..." file to support - make "Read full flash" operation - send flash backup file(s) to support - include in your e-mail full text from phone back label (phone name etc.) identification detection finished device-id: 52E6881C protocol ver: 04 ver. sw1: TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN ver. sw2: BASECODE ffs offset/size: 00E00000/00200000 detecting eeprom area in 1 chip(s)... flash: 01227E22202200:29EA0000000000 checking area[00000000]: 00000000-00FFFFFF... eeprom found near: 00E00000 detecting eeprom size... eeprom size: 00200000 eeprom chip: 00 eeprom area: 00000000:00E00000-00FFFFFF reading [eeprom[TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN]]... file saved: backup_eeprom[TELSDA26_05C_PCB01_GPRS_MT6226_S01.BASECODE.BIN]_20071002-151821.B0E.bin flash: 01227E22202200:29EA0000000000 Identification Done Manipulation... Manipulation Done Finalization... Finalization Done Write... formatting... flash: 01227E22202200:29EA0000000000 Write Done file saved: backup_system_log_52E6881C_TELSDA26_05C_PCB01_GPRS _MT6226_S01.BASECODE.BIN_BA219E82_20071002-151837.B0X.bin Finished, time used: 328 sec Remove/Install battery now !

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nokia n72 unlock successfully	m_tahir1	MXKEY Nokia Flasher and Unlocker (by Alim Hape)	0	12-26-2009 08:00
N70,N72 formatting without pc and without security code	shuaib_kashish	Nokia Base Band 5 ( BB-5 )	8	10-27-2008 08:21
n70,n72 formatting without pc and without security code	shuaib_kashish	Nokia Base Band 5 ( BB-5 )	0	10-22-2008 05:51
TV Y390 formate successfully!!!!!!!!!!!	cellbhai	Infinity-Box	9	01-07-2008 14:40
N95 DUAL SIM big lcd formate successfully	cellbhai	Infinity-Box	2	10-04-2007 15:38

10-02-2007, 14:38	#2 (permalink)
jimm07ct No Life Poster Join Date: Jan 2007 Location: agrabad,ctg,Bangladesh Age: 41 Posts: 1,406 Member: 426688 Status: Offline Sonork: 100.1596204 Thanks Meter: 524	well done , keep it up.............

10-02-2007, 16:33	#3 (permalink)
tsarkh No Life Poster Join Date: Jul 2005 Location: France Age: 48 Posts: 6,857 Member: 165812 Status: Offline Sonork: 100:1627635 Thanks Meter: 4,267	can u post the photo of the phone ??? and the pinout too...

10-31-2007, 10:25	#4 (permalink)
BadUnlockers No Life Poster Join Date: Nov 2003 Age: 39 Posts: 1,463 Member: 44610 Status: Offline Thanks Meter: 50	pls post here the pinout for this fone,it is highly needed in this forum

11-01-2007, 00:40	#5 (permalink)
InfinitySupport Product Manager Join Date: Mar 2005 Location: infinity-box Posts: 38,635 Member: 130995 Status: Offline Thanks Meter: 35,227	Yes, it's really good idea to post pinouts and phone photo.