GSM-Forum - N77 mini china phone dead done by Infinity

N77 MINI CHINA PHONE DEAD DONE BY INFINITY!!

Problem; Dead

PINOUT'S;
http://farm4.static.flickr.com/3274/...86b0662e_m.jpg

TRY TO FORMAT; BUT EROR!!

Code:

COM4 [VCP0] selected

Device: Autodetect 6205-6227 NOR

Checking data, wait...

advanced flash detection enabled

eeprom backup enabled, it may takes several minutes !

Action: reset

Boot...

Press and HOLD Power button now !

19200 fixed

Connecting, wait...

Initializing[6226:8A02:8A01]...

CPU: MT6226

high speed boot disabled

chip: 0031:F2C1:4B62

high speed disabled

boot step size: 0002

Release Power button now !

Boot Done

Initialize...

detecting chip #00 in region #00...

flash: A9EA80F098E59F:A9EA8000000000

flash: A9EA80F098E59F:A9EA8000000000

number of flash chip/regions detected: 00/01

Unknown or damaged flash chip, operation aborted. 

     Code:

     Fault reasons: 

1. damaged flash chip: replace or resolder/reball flash chip

2. damaged hardware: check hardware, water inside etc.

3. unknown hardware: set "Advanced chip detection method" box [un-checked] and try again

4. wrong model selection, try 'NAND' selection

Initialize Fail

Finished, time used: 122 sec

Remove/Install battery now !

SOLUTION; REFLOW CPU THEN FORMAT FFS AGAIN

FORMAT FFS;
http://farm4.static.flickr.com/3115/...54695101_m.jpg
click the image to inlarge

Code:

 LOGS;

COM4 [VCP0] selected

Device: Autodetect 6205-6227 NOR

Checking data, wait...

advanced flash detection enabled

eeprom backup enabled, it may takes several minutes !

Action: reset

Boot...

Press and HOLD Power button now !

19200 fixed

Connecting, wait...

Initializing[6226:8A02:8A01]...

CPU: MT6226

high speed boot disabled

chip: 0031:F2C1:4B62

high speed disabled

boot step size: 0002

Release Power button now !

Boot Done

Initialize...

detecting chip #00 in region #00...

flash: 01227E22202200:29EA0000000000

flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb

detecting chip #01 in region #00...

flash: 01227E22202200:29EA0000000000

flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb

number of flash chip/regions detected: 02/01

Initialize Done

Set baud...

115200

Set baud Done

Initialize bootcode...

Initialize bootcode Done

Check firmware integrity...

device parameters autodetection in progress..

detecting chip #00 in region #00...

flash: 01227E22202200:29EA0000000000

flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb

detecting chip #01 in region #00...

flash: 01227E22202200:29EA0000000000

flash: Amd AMD/Fujitsu std [D 0004x010000 003Ex040000 0004x010000] 16Mb

it's time to stop: 290000EA18F09FE518F09FE518F09FE518F09FE518F09FE5

number of flash chip/regions detected: 01/01

total flash region size: 01000000

detect device identification#1...

detection phase #1...

detect device identification#1 finished

identification#1 structure: 2nd [enhanced] generation

security area#1 is Ok

security area#1 backup saved: C:\Program Files\InfinityBox\ChineseMiracle\backup_security\id.B1F5F324.[T6226_05C_PCB01_GPRS_MT6226_S01.N200_U1_SD_OPEN_V5_6_2.BIN_9C2732E6].rpl

====================

New firmware detected: 

T6226_05C_PCB01_GPRS_MT6226_S01.N200_U1_SD_OPEN_V5_6_2.BIN
 

- make "Read full flash" operation

- send "backup_system_log_..." file to support: [email protected]

- send flash backup file(s) to support: [email protected]

- include in your e-mail full text from phone back label (phone name etc.)

====================

identification#1 detection finished

device-id: B1F5F324

identification#1 protocol ver: 04

ver. sw1: T6226_05C_PCB01_GPRS_MT6226_S01.N200_U1_SD_OPEN_V5_6_2.BIN

ver. sw2: N200_U1_SD_OPEN_V5.6.2, 19CDD863

ffs offset/size: 00E00000/00200000

detect device identification#2...

detection phase #1...

.

warning: optional information not found,

if phone works well just ignore this warning

detect device identification#2 finished

detecting eeprom/ffs area in 1 chip(s)...

standard eeprom/ffs offset detected: 00E00000

flash: 01227E22202200:29EA0000000000

checking area[00000000]: 00000000-00FFFFFF...

eeprom/ffs found near: 00E00000

detecting eeprom/ffs size...

eeprom/ffs size: 00200000

ffs chip: 00

eeprom/ffs area: 00000000:00E00000-00FFFFFF

Check firmware integrity Done

Check firmware content...

Check firmware content Done

Backup required data...

reading [eeprom[T6226_05C_PCB01_GPRS_MT6226_S01.N200_U1_SD_OPEN_V5_6_2.BIN]]...

warning: wrong data size at 0x00E0F000, retry...

read error recovered

warning: wrong cs at 0x00F13800, retry...

read error recovered

file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom[T6226_05C_PCB01_GPRS_MT6226_S01.N200_U1_SD_OPEN_V5_6_2.BIN]_20080803-115742.B0E.bin

flash: 01227E22202200:29EA0000000000

Backup required data Done

Patch required data...

Patch required data Done

Special operation...

Special operation Done

Write...

Write Done

Finalization...

formatting...

flash: 01227E22202200:29EA0000000000

Finalization Done

file saved: C:\Program Files\InfinityBox\ChineseMiracle\system_log_B1F5F324_T6226_05C_PCB01_GPRS_MT6226_S01.N200_U1_SD_OPEN_V5_6_2.BIN_9C2732E6_20080803-115806.B0X.bin

Finished, time used: 431 sec

Remove/Install battery now !
 

File system has been modified !

It is need to press and HOLD phone "Power" button

during long time (up to 1 min) to make phone Powered-On !

CHANGE IMEI;
http://farm4.static.flickr.com/3070/...dbc66de3_m.jpg
click the image to inlarge