N91 99PL128JC0BAWT1 Dead help
 

log here from another phone Working backup:
COM4 [VCP0] selected
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection active
Action: read NOR flash
Boot...
Press and HOLD Power button now !
baud autodetection active
19200
Connecting, wait...
Initializing[6226:8A02:8A01]...
high speed disabled
boot step size: 0002
Release Power button now !
Boot Done
Initialize...
detecting chip #00 in region #00...
flash: 01227E22022201:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
detecting chip #01 in region #00...
flash: 01227E22022201:F8D5DE00000000
flash: Amd AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud...
230400
Set baud Done
Identification...
device parameters autodetection in progress..
detecting chip #00 in region #00...
flash: 01227E22022201:2AEA0000000000
flash: Amd AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
detecting chip #01 in region #00...
flash: 01227E22022201:F8D5DE00000000
flash: Amd AMD/Fujitsu std [D 0008x002000 007Ex010000 0008x002000] 8Mb
number of flash chip/regions detected: 02/01
total flash region size: 01000000
detect device identification, method #1...
detection phase #1...
detect device parameters finished
structure: 2nd [enhanced] (or higher) generation
identification data Ok
identification data backup saved: id.BCB76A02.[MTK26_06B_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_12_F1 .BIN_E81B9F4A].rpl
New firmware detected: MTK26_06B_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_12_F1 .BIN
- make "Read detailed information, ask/rpl" operation
- send "backup_system_log_..." file to support
- make "Read full flash" operation
- send flash backup file(s) to support
- include in your e-mail full text from phone back label (phone name etc.)
identification detection finished
device-id: BCB76A02
protocol ver: 04
ver. sw1: MTK26_06B_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_12_F1 .BIN
ver. sw2: MAUI.06B.W07.12.F1
ffs offset/size: 00E00000/00200000
detecting eeprom area in 2 chip(s)...
flash: 01227E22022201:2AEA0000000000
checking area[00000000]: 00000000-007FFFFF...
flash: 01227E22022201:F8D5DE00000000
checking area[00800000]: 00000000-007FFFFF...
eeprom found near: 00E00000
detecting eeprom size...
eeprom size: 00200000
eeprom chip: 01
eeprom area: 00800000:00600000-007FFFFF
reading [flash[MTK26_06B_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_12_F1 .BIN]]...
file saved: backup_flash[MTK26_06B_PCB01_GPRS_MT6226_S01.MAUI_06B_W07_12_F1 .BIN]_20071113-150948.B0M.bin
file saved: backup_system_log_BCB76A02_MTK26_06B_PCB01_GPRS_MT 6226_S01.MAUI_06B_W07_12_F1.BIN_E81B9F4A_20071113-151014.B0X.bin
Finished, time used: 1407 sec
Remove/Install battery now !
full flash backup aldready send to Support by mail [email protected]
pls check and help me.
Thanksss.