GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > Hard/Software Products (official support) > Infinity-Box

Reply
 
LinkBack Thread Tools Display Modes
Old 11-15-2008, 01:37   #1 (permalink)
No Life Poster
 
Join Date: May 2005
Age: 36
Posts: 9,597
Member: 146708
Status: Offline
Sonork: 100.108221
Thanks Meter: 1,593
N95 (T6226_05C_PCB01_GPRS_MT6226_S01.B10_EFAIS_V1017A) is Dead..


hi supporters and all..

after firmware refresh phone is dead now..pls check the log...

Code:
COM17 [VCP2] selected
module  v2.69
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read/check detailed information
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:2866:E067
high speed disabled
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 76657273696F6E3A30320000000000000000000000000000
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
.
detection phase #2...
................................................................................................................................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1....
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset assigned: 00E00000
flash: EC257E25082501:76737200000000
checking area [00000000]: 00000000-00FFFFFF...
Can't detect eeprom/ffs area
Do you want to use standard ffs address: 00E00000 ?

If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs address selected by user
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
detecting ffs structure pass 1...
........................................................
can't detect fat record name location
error: ffs element #1 detection failed
detecting ffs structure pass 2...
........................................................
can't detect fat record name location
error: ffs element #2 detection failed
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Finished, time used: 173 sec
Remove/Install battery now !
  Reply With Quote
Old 11-15-2008, 02:00   #2 (permalink)
No Life Poster
 
Join Date: May 2005
Age: 36
Posts: 9,597
Member: 146708
Status: Offline
Sonork: 100.108221
Thanks Meter: 1,593
Quote:
Originally Posted by LoveLess View Post
hi supporters and all..

after firmware refresh phone is dead now..pls check the log...

Code:
COM17 [VCP2] selected
module  v2.69
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read/check detailed information
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:2866:E067
high speed disabled
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 76657273696F6E3A30320000000000000000000000000000
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
.
detection phase #2...
................................................................................................................................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1....
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset assigned: 00E00000
flash: EC257E25082501:76737200000000
checking area [00000000]: 00000000-00FFFFFF...
Can't detect eeprom/ffs area
Do you want to use standard ffs address: 00E00000 ?

If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs address selected by user
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
detecting ffs structure pass 1...
........................................................
can't detect fat record name location
error: ffs element #1 detection failed
detecting ffs structure pass 2...
........................................................
can't detect fat record name location
error: ffs element #2 detection failed
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Finished, time used: 173 sec
Remove/Install battery now !


i have the org. backup but after flashing again phone is still dead..

eeprom log..

Code:
COM17 [VCP2] selected
module  v2.69
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
"smart write" active
skip: Firmware
skip: Customization/Language Pack
skip: Customization
write: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:2866:E067
high speed disabled
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 76657273696F6E3A30320000000000000000000000000000
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
.
detection phase #2...
................................................................................................................................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset assigned: 00E00000
flash: EC257E25082501:76737200000000
checking area [00000000]: 00000000-00FFFFFF...
Can't detect eeprom/ffs area
Do you want to use standard ffs address: 00E00000 ?

If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs address selected by user
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: eeprom...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom_20081115-025718.B0E.bin
flash: EC257E25082501:76737200000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Area: Eeprom/ffs
flash: EC257E25082501:76737200000000
Write: Eeprom/ffs
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization ...
Finalization Done
Finished, time used: 315 sec
Remove/Install battery now !
  Reply With Quote
Old 11-15-2008, 02:07   #3 (permalink)
No Life Poster
 
gsm2start's Avatar
 
Join Date: Nov 2008
Location: Riyadh, KSA
Age: 38
Posts: 1,365
Member: 894719
Status: Offline
Sonork: 100.1580092
Thanks Meter: 905
try this one its back up flash file and the epprom of a chinese nokia N95

T6226_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16_MP _V3_F3_1.BIN

click here

let me if it works

good luck

shehab
  Reply With Quote
The Following User Says Thank You to gsm2start For This Useful Post:
Old 11-15-2008, 02:27   #4 (permalink)
No Life Poster
 
Join Date: May 2005
Age: 36
Posts: 9,597
Member: 146708
Status: Offline
Sonork: 100.108221
Thanks Meter: 1,593
Quote:
Originally Posted by LoveLess View Post
i have the org. backup but after flashing again phone is still dead..

eeprom log..

Code:
COM17 [VCP2] selected
module  v2.69
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: write NOR flash
"smart write" active
skip: Firmware
skip: Customization/Language Pack
skip: Customization
write: Eeprom/ffs
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:2866:E067
high speed disabled
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
460800
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 76657273696F6E3A30320000000000000000000000000000
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
.
detection phase #2...
................................................................................................................................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset assigned: 00E00000
flash: EC257E25082501:76737200000000
checking area [00000000]: 00000000-00FFFFFF...
Can't detect eeprom/ffs area
Do you want to use standard ffs address: 00E00000 ?

If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs address selected by user
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
reading: eeprom...
file saved: C:\Program Files\InfinityBox\ChineseMiracle\eeprom_20081115-025718.B0E.bin
flash: EC257E25082501:76737200000000
Backup required data Done
Patch required data ...
Patch required data Done
Special operation ...
Special operation Done
Write ...
Area: Eeprom/ffs
flash: EC257E25082501:76737200000000
Write: Eeprom/ffs
detect device identification#2...
detection phase #1...
.
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
Write Done
Finalization ...
Finalization Done
Finished, time used: 315 sec
Remove/Install battery now !
Quote:
Originally Posted by LoveLess View Post
hi supporters and all..

after firmware refresh phone is dead now..pls check the log...

Code:
COM17 [VCP2] selected
module  v2.69
Device: Autodetect 6205-6227 NOR
Checking data, wait...
advanced flash detection enabled
eeprom backup enabled, it may takes several minutes !
Action: read/check detailed information
Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6226:8A02:8A01]...
CPU: MT6226
high speed boot disabled
chip: 0031:2866:E067
high speed disabled
boot packet size: 0002
Release Power button now !
Boot Done
Initialize ...
detecting chip #00 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
number of flash chip/regions detected: 02/01
Initialize Done
Set baud ...
115200
Set baud Done
Initialize bootcode ...
Initialize bootcode Done
Check firmware integrity ...
device parameters autodetection in progress...
detecting chip #00 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
detecting chip #01 in region #00...
flash: EC257E25082501:76737200000000
flash: Samsung AMD/Fujitsu std [D 0008x002000 00FEx010000 0008x002000] 16Mb
it's time to stop: 76657273696F6E3A30320000000000000000000000000000
number of flash chip/regions detected: 01/01
total flash region size: 01000000
detect device identification#1...
detection phase #1...
.
detection phase #2...
................................................................................................................................
warning: identification#1 information not found, possible reasons:
.old firmware type w/o identification#1 data
.damaged firmware
.damaged hardware
if phone works fine just ignore this warning
detect device identification#1 finished
detect device identification#2...
detection phase #1....
warning: optional information is not found,
if phone works well just ignore this warning
detect device identification#2 finished
detecting eeprom/ffs area in 1 chip(s)...
standard eeprom/ffs offset assigned: 00E00000
flash: EC257E25082501:76737200000000
checking area [00000000]: 00000000-00FFFFFF...
Can't detect eeprom/ffs area
Do you want to use standard ffs address: 00E00000 ?

If you are not sure that standard address is correct:
1. press "NO" and terminate current operation
2. make flash backup for emergency case
3. repeat required operation
standard ffs address selected by user
detecting eeprom/ffs size...
eeprom/ffs size: 00200000
ffs chip: 00
eeprom/ffs area: 00000000:00E00000-00FFFFFF
detecting ffs structure pass 1...
........................................................
can't detect fat record name location
error: ffs element #1 detection failed
detecting ffs structure pass 2...
........................................................
can't detect fat record name location
error: ffs element #2 detection failed
Check firmware integrity Done
Check firmware content ...
Check firmware content Done
Backup required data ...
Finished, time used: 173 sec
Remove/Install battery now !

phone is oki now.. with orj eeprom and flash file..



eeprom[T6226_05C_PCB01_GPRS_MT6226_S01.B10_EFAIS_V1017A.B IN]_20081113-015948.B0E
flash[T6226_05C_PCB01_GPRS_MT6226_S01.B10_EFAIS_V1017A.B IN]_20081113-001035.B0M
  Reply With Quote
Old 11-15-2008, 02:30   #5 (permalink)
No Life Poster
 
gsm2start's Avatar
 
Join Date: Nov 2008
Location: Riyadh, KSA
Age: 38
Posts: 1,365
Member: 894719
Status: Offline
Sonork: 100.1580092
Thanks Meter: 905
good to know

regards
  Reply With Quote
Old 11-15-2008, 02:31   #6 (permalink)
No Life Poster
 
Join Date: May 2005
Age: 36
Posts: 9,597
Member: 146708
Status: Offline
Sonork: 100.108221
Thanks Meter: 1,593
Quote:
Originally Posted by gsm2start View Post
try this one its back up flash file and the epprom of a chinese nokia N95

T6226_05C_PCB01_GPRS_MT6226_S01.MAUI_05C_W06_16_MP _V3_F3_1.BIN

click here

let me if it works

good luck

shehab
thanx sir..

i will add to rapidshare to this new flash file.. cause of not exist on support.. supporter would add to support page..

thanx for ur sensetive again...
  Reply With Quote
Old 11-15-2008, 02:39   #7 (permalink)
No Life Poster
 
Join Date: May 2005
Age: 36
Posts: 9,597
Member: 146708
Status: Offline
Sonork: 100.108221
Thanks Meter: 1,593
eeprom[T6226_05C_PCB01_GPRS_MT6226_S01.B10_EFAIS_V1017A.B IN]_20081113-015948.B0E
flash[T6226_05C_PCB01_GPRS_MT6226_S01.B10_EFAIS_V1017A.B IN]_20081113-001035.B0M


http://rapidshare.com/files/16387626....BIN_.rar.html

b.r.
  Reply With Quote
The Following User Says Thank You to LoveLess For This Useful Post:
Old 11-15-2008, 21:54   #8 (permalink)
Product Manager
 
InfinitySupport's Avatar
 
Join Date: Mar 2005
Location: infinity-box
Posts: 37,851
Member: 130995
Status: Offline
Thanks Meter: 34,296
Hello,

Thanks for link !
We will add this file in support area ASAP.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
ub team n95 8g after unlock contact service my phone is dead helllllllllllllllllllllp khalid0909 Universalbox 3 03-28-2009 12:17
Nokia N95 - Is Dead After Unlock PHU KADAR Nokia Base Band 5 ( BB-5 ) 7 11-11-2008 03:59
n95 rm-160 to n95 rm-159 is it possible? $ide$tep Nokia Base Band 5 ( BB-5 ) 2 03-13-2008 00:46
Has anyone supplied bb5team with n95-8gig locked ? Is n95-8g coming soon? Rezn BB5BOX 13 02-25-2008 21:07

 



All times are GMT +1. The time now is 19:19.



Powered by Searchlight © 2019 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2017 -
Page generated in 0.37490 seconds with 8 queries

SEO by vBSEO